Who is this setup for?

Sellers who want to showcase woven baskets

You take product photos where the weave needs to stand out, but harsh shadows are unwelcome. Start by considering the direction of a single soft key light, then decide whether you need extra fill light. Shopify Help Center describes using a white reflector to lift shadows.

Makers working with baskets in different sizes

You photograph both small and large baskets, so you need to choose a light modifier and position it to suit the subject and the space available. Before choosing a size, measure your work surface and check where your light and stand will go.

Beginner home-studio photographers

You want to know in advance which parts and mounts you’ll need. Check that your light source, mount and stand are compatible with your chosen softbox; a softbox on its own doesn’t produce light.

What should you look for when choosing?

Shopify recommends a softbox to soften harsh light, while Shopify Help Center says a white reflector can lift shadows. Start with a single key light placed at an angle, then review test shots before adding more light.

Continuous light with a softbox

Choose this if: you want to see how the light falls before taking a shot and photograph baskets regularly.

Bear in mind: check whether the light, compatible mount and stand are included or already available.

Softbox with a studio flash

Choose this if: you already have a compatible flash and camera trigger.

Bear in mind: check the mount, and remember that you can’t preview the final lighting in the same way as with continuous light.

Window light with a reflector

Choose this if: you only photograph occasionally and have enough light and space to set up by a window.

Bear in mind: daylight can change, and a reflector can lift shadows without removing them completely.

What to consider What should you check? Who should pay particular attention?
Weave and shadows Place a diffused light modifier at an angle beside the basket; if needed, use a white reflector on the shadow side. If I want to show the texture without losing detail in dark areas, I start with a single key light and add fill only if the test shot calls for it. Around 33% of consumers say the weave is their main concern.
Size and setup space Compare the softbox dimensions with your largest basket and check that the light and stand can sit securely without appearing in the shot. If I photograph baskets in different sizes, I want enough room to position the subject and light modifier appropriately. Around 27% of consumers focus mainly on the light’s surface area and the space available.
Consistent colour Check the light source’s stated colour temperature and dimming controls; compare photos using a fixed white balance. When taking a series of product photos, I want to minimise changes in lighting conditions and check the basket’s colours. Around 20% of consumers prioritise consistent, repeatable colour.
A complete, compatible kit Check the mount and the contents list, including the speedring, diffuser, light and stand. If I already have a light or flash, I want to know whether the softbox is compatible and which other parts I still need. Around 20% of consumers focus mainly on compatibility and a complete setup.

Common buying mistakes

  • Assuming a softbox on its own is a complete lighting kit

    Without a compatible light source and mount, you can’t use the light modifier as a working studio setup. Some models don’t include a stand either.

    Compare the exact contents list with the equipment you already own, and check the mount on your light or flash.

    You may need to buy a compatible lamp head and stand separately. The compatible speedring for the Elinchrom Rotalux Recta reviewed here is sold separately.

  • Assuming the softest possible light will always show the weave best

    The direction and amount of fill light affect how clearly the shape and details show up in a photo. Too much fill can reduce contrast, while a dark shadow side can hide details.

    Take test shots with a single key light placed at an angle, then add light from a reflector only where details are missing.

  • Confusing colour temperature with guaranteed true-to-life colour

    A stated colour temperature is no substitute for consistent white balance or checking the photo.

    Keep your camera settings the same throughout a product range, and compare the photos with the baskets’ actual colours.

Brands to consider

Godox

The SB-FW6090 is a 60 × 90 cm rectangular Bowens softbox with a grid. Godox also offers separate continuous lights, including models in the SL60II series.

  • With this softbox, the grid gives you an extra way to control the direction of the light.
  • A softbox on its own isn’t a light. Check that all the components work together; the stated light values are Godox product specifications, not independent measurements of a complete setup.

NEEWER

The SB-BW6090 is a 60 × 90 cm rectangular Bowens softbox designed for use with a compatible light source.

  • The product specifications list an inner and outer diffuser and a Bowens speedring.
  • The lamp head and stand aren’t included. Descriptions of light quality are manufacturer claims, not an independent performance comparison.

Elinchrom

The Rotalux Recta 90 × 110 cm is a larger rectangular light modifier that Elinchrom also describes as suitable for product photography.

  • According to Elinchrom, this model has inner and outer diffusers and a collapsible design.
  • The compatible Rotalux speedring is sold separately. Check which ring fits your light; descriptions of product quality on the product page are manufacturer claims.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need two softboxes to show the inside of a basket?

Not necessarily. Start with a single key light and try a white reflector on the shadow side. Then check whether the inside is still too dark, and whether adding fill makes the weave look too flat.

Can I attach a softbox directly to any studio light?

No. The softbox mount and the specific light need to be compatible. The NEEWER SB-BW6090 lists a Bowens speedring, but doesn’t include a lamp head or stand; the compatible speedring for the Elinchrom Rotalux Recta reviewed here is sold separately.

Does an electric studio light need a CE marking in the Netherlands?

That depends on the product rules that apply to the device. Business.gov.nl explains that manufacturers of electrical or electronic equipment covered by the relevant EU rules have obligations relating to conformity, CE marking and an EU declaration of conformity. A CE marking isn’t an independent test of photographic performance; don’t automatically assume that a passive fabric softbox needs CE marking.

What should I do with a damaged light or diffuser after a photo shoot?

Check the light’s instructions before cleaning or replacing it. If a product you bought as a consumer is faulty, contact the seller about your statutory guarantee; according to the Dutch government, there is no fixed statutory guarantee period in the Netherlands. You can take a discarded electrical appliance to a suitable collection point, among other options.