Who is this guide for?

Workshop participant in a room with weak Wi-Fi

You want to make one spot suitable for a video call and need to find out where a repeater can still get a strong enough signal. The Consumentenbond recommends placing an extender somewhere between the router and the area with weak coverage.

Household with video calls happening at the same time

You have several active devices or calls during the workshop and want to check coverage and connectivity in the places you actually use. The Consumentenbond considers factors such as speed and range when testing Wi-Fi extenders.

Participant with a network cable running to their workspace

You can run a cable to the workshop room, so you’re comparing a wired access point with a wireless repeater. Check that the model you choose actually has access point mode; a LAN port alone doesn’t guarantee this.

What should you look for when choosing?

Standalone wireless repeater

When to choose it: You want to cover one workshop room, there’s no network cable running to it, and you can place the repeater where the router’s signal is still usable.

Trade-off: You don’t need to run a cable, but the repeater still relies on the wireless connection it receives from the router.

Wired access point

When to choose it: There’s a network cable running to the workshop room and you want to provide Wi-Fi there.

Trade-off: The connection back to the router runs through the cable, but you’ll need a suitable cable route and a model with access point mode.

Multiple mesh Wi-Fi points

When to choose it: Several rooms have poor coverage or participants use devices in different places at the same time.

Trade-off: Check how the points connect to each other and whether the mesh features you want work with your router. You’ll also need more than one device.

What to consider What should you check? Who is this important for?
Coverage in the workshop space Check that there’s a place with a power socket and a strong enough signal. Then test a call from the actual seat you’ll use. If I want to make one room with weak Wi-Fi usable, the repeater itself still needs a good connection to the router. Around 36% of consumers are most concerned about having reliable coverage in their workshop space when buying.
Calls happening at the same time Check the Wi-Fi support on your devices and the connection between Wi-Fi points. Test with the number of devices and calls you expect to use at once. If several people are taking part, I want to know that the connection works in all the places we use, not just what the maximum speed on the box says. Around 29% of consumers are most concerned about support for several simultaneous connections.
Wired connection Check explicitly whether the model has access point mode and how its Ethernet port works in that mode. If there’s already a network cable running to the workshop room, I want to be able to use it to provide Wi-Fi there. Around 21% of consumers prioritise making use of an existing network cable.
Cost and router compatibility Check which router is needed for the mesh features you want, how many points you’ll need and what power consumption is stated or measured. If I want to avoid unnecessary devices or features that don’t work with my router, I first compare what my setup actually needs. Around 14% of consumers are most concerned about cost and compatibility with their existing equipment.

Common buying mistakes

  • Putting the repeater where the signal is already almost gone

    A wireless repeater still relies on the signal it receives from the router. So a power socket in the spot you want to cover doesn’t automatically make it a good place for the repeater.

    Start by placing the device somewhere in between, where the signal is still strong enough, then test a video call in the workshop room. The Consumentenbond suggests using an indicator light or app to help find a suitable spot.

  • Assuming an Ethernet port means the device has access point mode

    A LAN port may be intended for connecting a wired device. That doesn’t necessarily mean the device can provide Wi-Fi as an access point over a cable.

    Check the operating modes of the exact model before choosing a wired setup.

    Without the right mode, your wired setup may not work and you may need a different device.

  • Assuming the maximum Wi-Fi speed guarantees a good call

    The advertised speed alone doesn’t tell you how the connection will perform in your workshop space. Placement, coverage and connected devices also play a part.

    Treat the speed as a stated specification, then test the connection in the places you’ll use it and with the number of devices you expect to have online at once. The Consumentenbond assesses various factors, including speed and ease of use.

Brands to consider

TP-Link

The RE705X is an example of a standalone dual-band Wi-Fi 6 repeater which, according to TP-Link, can also work as a wired access point.

  • TP-Link lists a gigabit Ethernet port and OneMesh for the RE705X.
  • For the OneMesh setup described, TP-Link specifies a OneMesh router. The model specifications don’t measure video call performance.

FRITZ!

The FRITZ!Repeater 1200 AX is worth considering if you want to extend an existing FRITZ! network or need a repeater with a LAN connection.

  • FRITZ! lists Wi-Fi 6, gigabit LAN and the option to connect the repeater to a FRITZ!Box via LAN.
  • The FRITZ! Mesh compatibility described isn’t guaranteed with every combination involving a different router.

devolo

The WiFi 6 Repeater 3000 is an option to compare if you want the choice of wireless repeating or a wired access point.

  • devolo lists a gigabit LAN connection and access point mode.
  • devolo specifies a LAN cable for access point mode. A stated maximum speed isn’t a measure of performance in your workshop.

NETGEAR

The EAX15 is a standalone dual-band Wi-Fi 6 extender for expanding an existing network.

  • NETGEAR lists a gigabit Ethernet port and a maximum wireless speed of up to 1.8 Gbit/s for this model.
  • That maximum speed is a manufacturer’s stated figure and doesn’t guarantee a specific speed or call quality in your workshop space.

Joybuy product picks

The options below cover mesh Wi-Fi for several areas, a standalone repeater, and access points or extenders for a wired connection.

ASUS ZenWiFi BD4, dual-band Wi-Fi 7

ASUS ZenWiFi BD4, dual-band Wi-Fi 7

Designed for a mesh setup to provide coverage in several areas; check that its features suit your router and devices.

The product name specifies dual-band, 2.4 GHz and 5 GHz, Wi-Fi 7 (802.11be) and the colour White.

View at Joybuy
Wi-Fi Repeater Pro Black

Wi-Fi Repeater Pro Black

A standalone repeater for extending an existing wireless network; check the signal where you plan to plug it in.

View at Joybuy
TP-Link Omada EAP653 wireless access point

TP-Link Omada EAP653

An access point to consider if you want to provide Wi-Fi from a wired network connection; check which connection and installation your setup requires.

The product name specifies a wireless access point.

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N

The product name lists both access point and Wi-Fi extender use; check which mode suits your connection to the workshop room.

The product name specifies N up to 300 Mbps, two antennas, WPS and Passive PoE.

View at Joybuy
TP-Link Deco X50, 2-pack mesh Wi-Fi, dual-band Wi-Fi 6

TP-Link Deco X50, 2-pack

A mesh option if you want to organise coverage across several areas; check how the points can connect to each other.

The product name specifies dual-band, 2.4 GHz and 5 GHz, and Wi-Fi 6 (802.11ax).

View at Joybuy

Frequently asked questions

Can I put a repeater straight in the room with the weakest signal?

Not without first checking that the repeater itself can still get a strong enough signal there. A wireless repeater needs a usable connection to the router. For weak coverage, the Consumentenbond recommends placing it somewhere in between and suggests using an indicator light or app to help.

When should you choose access point mode instead of repeater mode?

Choose access point mode if there’s a network cable running to the spot you want to cover and the model supports this mode. Check the specifications for the exact model; devolo specifies a LAN cable in its access point instructions.

What should you do after installation?

Check whether your router and Wi-Fi devices need updates, and use a suitable password and up-to-date encryption. The Consumentenbond recommends updating routers and Wi-Fi devices in its usage tips.

What running costs should you compare as well as the purchase price?

Compare how many Wi-Fi points you need and factor in their power consumption. The Consumentenbond includes energy use in its tests; also check the support and warranty for your chosen model and seller.

What product requirements apply to a Wi-Fi repeater sold in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, radio equipment sold in Europe must meet the applicable requirements and carry a CE mark. Check the mark on the device being offered; this general requirement doesn’t confirm that a specific listing or item meets it.