First, test your internet connection using a network cable, then check the Wi-Fi where you take part in the workshop. A new router won’t fix a problem with your provider’s connection. If the signal is particularly weak beyond the hallway, first try moving your router to a better spot. Then, depending on the cable route and space available, choose between a wired access point and additional mesh nodes. The Consumers’ Association (Consumentenbond) recommends testing with a wired connection to check your internet service.
Who is this advice for?
Workshop participant with weak Wi-Fi
You’re taking part in the workshop in a room beyond the hallway and want to check first whether the Wi-Fi signal there is too weak. The Consumers’ Association recommends checking your internet connection and the Wi-Fi in the room you’re using separately.
Resident who can run a cable
You can run a network cable to the workshop room or a better spot for the signal, and want to compare a wired access point with mesh. The Consumers’ Association discusses wired testing, while TP-Link describes ethernet backhaul for the Deco X50.
Resident with limited hallway space
You’re looking for a suitable spot for one or more Wi-Fi nodes, without assuming that the equipment has to go in the middle of the narrow hallway. Test the connection where you take part, and see whether a node could go in another suitable spot.
What should you consider when choosing?
Position your existing router better
Choose this if: your wired connection is good and moving the router gives you sufficient Wi-Fi in the workshop room.
Bear in mind: moving it may require a longer cable. Ask your provider for advice if you want to move the provider’s modem.
Router or wired access point
Choose this if: you can run a network cable to a suitable spot beside or beyond the hallway.
Bear in mind: you’ll need to run cables and set the correct router or access point mode. One device won’t guarantee coverage through obstacles.
Multiple mesh nodes
Choose this if: one transmitter doesn’t reach the workshop room and you can place an extra node somewhere it still gets a good connection from the first one.
Bear in mind: extra nodes need space and power sockets. A manufacturer’s coverage claim won’t predict how the signal will perform in your hallway.
Check your connection and where your equipment is positioned first, then decide whether you really need anything extra.
| What to consider |
What should you check? |
Who is this important for? |
| Reliable workshop connection |
Test the Wi-Fi where you’ll take part and compare it with a test using a network cable. |
If I don’t want my connection to drop out during the workshop, I’ll first check that it’s stable where I’m sitting. Around 36% of consumers put reliability at the top of their list when buying. |
| Coverage and positioning |
Test suitable spots for the router or extra nodes. If you can run a cable, check whether ethernet backhaul is possible. |
If the workshop room is beyond the hallway, I want to know where a Wi-Fi node can go without blocking the narrow passage. Around 29% of consumers prioritise coverage and positioning. |
| Checking your internet connection |
Compare the actual upload and download speeds over a cable with the requirements of the platform you use. |
If I don’t want to invest in Wi-Fi equipment to fix a problem with my provider, I’ll test the wired connection first. Around 21% of consumers put this check first before buying. |
| Setup and maintenance |
Check that the router or access point mode is suitable and find out how firmware updates are managed. |
If I’m connecting my own router or mesh system, I want to know in advance how it will work with my existing network and stay up to date. Around 14% of consumers consider management and maintenance their main buying concern. |
Common pitfalls
-
Buying a router without testing your internet connection
Replacing your Wi-Fi equipment alone won’t fix a problem with your provider.
First, test the speed on a computer connected using a network cable, then check the Wi-Fi in the workshop room.
-
Assuming the maximum mesh coverage guarantees a signal in your hallway
Distance and obstacles affect coverage in your home. An extra node will only work well if it still has a usable connection of its own.
Test the spot you have in mind. If positioning is difficult, also check whether you can run a network cable and use ethernet backhaul.
-
Assuming a newer Wi-Fi standard means better video calls
The Consumers’ Association points out that the Wi-Fi version alone doesn’t determine the performance you’ll get in the workshop room.
Choose based on your measured connection, positioning and the connections you need—not just Wi-Fi 6 or Wi-Fi 7.
Brands to consider
TP-Link
The Deco X50 is a Wi-Fi 6 mesh system available with different numbers of nodes. It’s worth considering if a single transmitter isn’t enough.
- TP-Link lists three gigabit ports per node and optional ethernet backhaul.
- The stated maximum coverage is a manufacturer’s claim and won’t predict what’s achievable in a specific hallway.
ASUS
The RT-AX58U is a standalone Wi-Fi 6 router with, among other features, access point and AiMesh modes.
- ASUS’s official specifications list four gigabit LAN ports.
- One router doesn’t guarantee coverage in a remote workshop room. Check which hardware version you’re buying, too.
FRITZ!
The FRITZ!Mesh Wi-Fi Set 1700, with two nodes, is designed to extend an existing router or modem.
- FRITZ! describes how to use it with a FRITZ!Box or another router, and says it receives automatic updates.
- Wi-Fi 7 and the manufacturer’s claims about reliability don’t prove it will make a difference in your hallway.
NETGEAR
According to the Dutch support information, the Orbi RBK352 is a mesh set with one router and one satellite.
- NETGEAR has a Dutch support page for this model with manuals and firmware downloads.
- Support information alone doesn’t tell you how it will perform or whether it’s currently available for your needs.
Joybuy products
This selection includes standalone routers and mesh options for getting Wi-Fi where you take part in your virtual workshop.
No image available
ASUS RT-AX52 AX1800 dual-band Wi-Fi 6 router
A standalone router to consider if one well-positioned transmitter is enough. The product description mentions AiMesh expansion with a compatible ASUS router.
Dual-band (2.4 GHz / 5 GHz); Gigabit Ethernet.
AiMesh expansion requires another AiMesh-compatible ASUS router.
View at Joybuy
No image available
TP-Link Deco X50 3-pack dual-band Wi-Fi 6
A mesh set to consider if you need Wi-Fi in several places. Test where the nodes can be positioned effectively in your home.
3-pack; dual-band (2.4 GHz / 5 GHz); Wi-Fi 6 (802.11ax).
The product description lists three gigabit ports per unit.
View at Joybuy
No image available
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router
A mesh router to consider if you want your network to work across several locations. Check in advance that the positioning and connections are right for your home.
Dual-band Wi-Fi 7.
View at Joybuy
No image available
Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router
A mesh router to consider if you want to use Wi-Fi in different places. Check that its features and positioning suit your existing network.
AX3000; dual-band Wi-Fi 6.
View at Joybuy
No image available
Huawei eKit OptiX LG8245B7N BE3600 dual-band Wi-Fi 7 4G dongle router
A router to consider if you want to take part in a workshop wirelessly. Check in advance which connection and network service your situation requires.
Dual-band Wi-Fi 7; 4G dongle functionality.
View at Joybuy
Frequently asked questions
How can you check whether your router is the problem before the workshop?
First, test your internet speed on a computer connected using a network cable, then check the Wi-Fi where you’ll be taking part. If the wired connection is consistently much slower than expected, contact your provider.
Does an extra Wi-Fi node have to go in the narrow hallway?
No, not necessarily. Find a spot where the node itself still gets a good connection, then test the result in the workshop room. If you can run a cable, compare a wired access point with mesh using ethernet backhaul.
How much internet speed does your virtual workshop need?
It depends on the platform you’re using and whether you’ll be streaming video yourself. Zoom recommends a download speed of 2.6 Mbit/s and an upload speed of 1.8 Mbit/s for 720p video in a group meeting. These figures won’t necessarily apply to every workshop platform.
Can you use your own router in the Netherlands?
Yes. ACM ConsuWijzer explains that you’re free to choose your own router. Ask your provider which settings your connection needs, and keep the device up to date.
What should you check before installation and maintenance?
Check whether you need an extra node or a network cable, and whether the router or access point mode is suitable for your existing modem. Also find out how firmware updates are provided and who can help with installation.