Who are these charging solutions for?

Student with an existing clip-on microphone set

Looking for a separate charging case for the right model generation, so the transmitters and receiver can be stored and charged together. RØDE and DJI publish compatibility information for each product family.

Student with several USB devices on their desk

Looking for one permanent charging spot, but needs to check whether the microphone can be charged using the available USB connection and power supply, as set out in the manual. 4smarts describes its Office 60W station as having six USB-A ports and one USB-C port.

User of a wireless handheld transmitter

May be better suited to a dock for a compatible transmitter or battery type than to a case for a compact clip-on microphone set. Shure specifies the SBC203 for compatible SLX-D transmitters and SB903 batteries.

What should you look for when choosing?

Model-specific charging case

Best for: a compatible compact microphone set that you want to store together and top up between uses.

Keep in mind: cases are not automatically interchangeable between models or generations.

Desk dock for handheld transmitters or batteries

Best for: compatible Shure SLX-D transmitters or SB903 batteries that you want to charge in a permanent spot.

Keep in mind: the SBC203 has two charging bays and is designed for compatible components; SB903 batteries are not included.

USB charging station with cables

Best for: a microphone that can be charged using a compatible USB power supply, according to its manual, especially if you also have other USB devices on your desk.

Keep in mind: a USB port is no substitute for specific charging contacts or the required cable.

What to consider What to check before buying Who is this important for?
Compatibility Compare the full model name and generation of the transmitter, receiver, battery and case or dock. If I’m looking for a charger for my existing set, I want to know that it will fit my specific components. Consumers who prioritise compatibility make up around 33% of consumers in this choice breakdown.
Desk space and ports Count the USB-A and USB-C connections you need, and check the specified power supply for each device. If several devices charge on my desk, I want to connect them all in one place without assuming that every port will work with my microphone. Consumers who prioritise shared charging make up around 27% of consumers in this choice breakdown.
Storage and topping up on the go Check which components fit in the case and which set can benefit from the extra charges. If I use my microphone set outside my room, I want to keep everything together and top it up without having to use a mains socket each time. Around 20% of consumers prioritise storage and topping up on the go.
A safe, complete set-up Read the manual and check what’s included; charge in a clear, dry space and don’t use damaged cables. If I keep the charger in my room, I want to know what I need and leave enough space for heat to escape. Around 20% of consumers prioritise a safe, complete charging set-up.

Common buying mistakes

  • Choosing a case by brand name without checking the generation

    RØDE and DJI make charging cases for specific models or product families. So a case from the same brand won’t necessarily fit your microphone.

    Compare the full model names of the case, transmitter and receiver with the manufacturer’s compatibility information.

  • Mistaking a complete microphone set for a separate charging case

    An offer may also include transmitters and a receiver. You may already have these components if you’re only looking for an extra charger.

    Read what’s included in the box and compare it with the components you already own.

  • Assuming any USB port can charge the microphone

    A USB connection doesn’t guarantee that the microphone can charge using that power supply or cable. Also check whether the solution has the required charging contacts.

    Compare your microphone’s charging requirements with the outputs, power supply and included components.

  • Tucking the charger away among bedding or other belongings

    A charger needs room to release heat. The Netherlands Fire Service also warns against using damaged cables or chargers.

    Charge in a clear, dry space and check the cable and charger for damage. If you have a Shure SBC203, also allow for the specified ventilation clearance.

Brands to consider

RØDE

Makes model-specific portable cases for compact Wireless sets, including a separate Charge Case for Wireless GO II.

  • According to RØDE, the Wireless GO II case holds two transmitters and a receiver and provides two extra charges.
  • Compatibility varies between Wireless generations, so check the exact set before choosing a case.

DJI

Offers charging cases for different Mic product families; the Mic 2 Charging Case is designed for a compatible DJI Mic 2 set.

  • According to DJI, the Mic 2 case charges two transmitters and a receiver and pairs them automatically.
  • The Mic 2 case is not necessarily interchangeable with cases for other Mic generations.

Shure

Makes fixed docks for specific wireless handheld and bodypack transmitters and batteries, including the SBC203 for compatible SLX-D equipment.

  • Shure specifies two charging bays for compatible transmitters or SB903 batteries.
  • SB903 batteries are not included; the manual specifies that sufficient ventilation is required.

4smarts

Makes USB charging stations for a shared charging spot; this is not a model-specific microphone charger.

  • According to 4smarts, the Office 60W station has six USB-A ports and one USB-C port.
  • The port layout doesn’t confirm that a particular microphone can charge with it; check the specified USB charging method.

Hollyland

Offers separate charging cases for LARK M2, including a Mobile version.

  • Hollyland says the LARK M2 Mobile case provides two extra charges and includes a USB-A-to-USB-C cable.
  • Check that the case is compatible with the version of your existing set; the product information for the Camera version doesn’t provide a clear basis for confirming interchangeability.

Products at Joybuy

Related products will be available soon.

Frequently asked questions

Will any charging case from the same brand fit your microphone?

No. Cases aren’t automatically interchangeable between models or generations. RØDE and DJI publish compatibility information for each product family, so compare the full model names of all the components you want to charge.

How can you position a charger safely in your student room?

Follow the manual and charge in a clear space where heat can escape. The Netherlands Fire Service advises keeping chargers uncovered and not using damaged cables or chargers. The Shure SBC203 manual also specifies that you need to leave enough space for ventilation.

Does a separate charger always come with a battery, cable or mains power supply?

No, what’s included varies by model. RØDE lists the case as the only item in the box for the Wireless GO II Charge Case; Shure states that SB903 batteries are not included with the SBC203. Check exactly what’s included in the offer before you order.

Are all wireless microphones legally required to have USB-C in the Netherlands?

The European Commission lists specific device categories covered by the common charger rules, for which USB-C requirements have applied since 28 December 2024, and laptops since 28 April 2026. Wireless microphones aren’t listed separately. So check the connection and charging requirements for your model.

What are your rights if a charger you bought online doesn’t work properly?

According to ACM ConsuWijzer, the seller must offer a solution if a product doesn’t perform as you could reasonably expect with normal use. Online purchases also generally come with a statutory 14-day cooling-off period after delivery, subject to applicable exceptions.