Who is this guide for?

Downloading at the end of the hallway

Your Wi-Fi works well by the router, but the signal is weak where you download game updates. You mainly want to know where to place an extra point. Consumentenbond recommends placing a Wi-Fi extender in the middle of your home.

When you can run a cable

You can connect a mesh point closer to where you download via Ethernet, and prefer a stable connection between points to a completely wireless setup. Tweakers describes wired backhaul as a stable way to connect satellites.

When there’s no way to run a cable

You need to connect the mesh points wirelessly and want to know whether their placement and connection will suit the way your household uses the network.

What should you consider when choosing?

Mesh points with Ethernet backhaul

When to choose it: Choose this option if you can run a network cable to a point closer to the end of the hallway.

Trade-off: You’ll need to install the cable route. Your internet speed and the connection between your gaming device and the mesh point will also affect performance.

Fully wireless mesh

When to choose it: Choose this option if you can’t run cables and can place an intermediate point where it still gets a good connection to the previous point.

Trade-off: The wireless connection between points remains crucial. Tweakers notes that this backhaul matters when a satellite is placed wirelessly; extra radio bands don’t guarantee a better connection in your hallway.

Check your connection or router position first

When to do this: Hold off on buying a mesh system if a wired speed test at the router is already disappointing, or if moving the router could provide enough coverage in the hallway.

Trade-off: Checking your speed or moving the router could save you from buying a mesh system, but it isn’t always practical or enough for a long home.

What to consider What should you check? Who is this important for?
Wi-Fi coverage where you download Test the connection where you download, as well as from an intermediate position where the point still gets a usable signal. When I download at the end of the hallway, I want to know where an extra point can still maintain a good connection to the rest of the network. Around 36% of consumers give coverage in that spot their highest priority.
Connection between mesh points Check whether the points support Ethernet backhaul and which ports will remain available. If you’re using a wireless connection, check the link to the previous point. For large updates, what matters most to me is a reliable route from the distant point to the router. Around 29% of consumers prioritise the connection between points.
Checking your internet speed Test using a computer connected to your home network with a network cable, then compare the result with a test at the end of the hallway. If downloads are slow, I want to rule out my internet connection as the cause first. Around 21% of consumers make this their top check.
Costs and support Check how many points are included in the box, whether extra features require a subscription, and what information is available about firmware updates. I don’t want to choose more points or features than my home needs, so I also look at maintenance and terms. Around 14% of consumers prioritise purchase and running costs.

Common pitfalls

  • Placing a mesh point right at the weak end of the hallway

    If the point itself gets a poor connection there, it won’t be able to pass on a good signal to your device.

    First, try an intermediate position and check whether the point gets a good connection to the previous mesh unit. After installation, test the connection where you download, too.

    An extra point also needs a suitable location and a power socket; a better intermediate position may be enough.

  • Assuming the Wi-Fi speed on the box is your download speed

    Actual download speeds also depend on your internet connection, obstacles and the link between mesh points.

    First, test the connection to the router using a cable, then compare the result with a test where you download.

  • Assuming mesh points and extra features will always work together

    According to Linksys, the Linksys Velop Cognitive Mesh family isn’t backwards compatible with Velop Intelligent Mesh. In its test of the Deco X50 set, Tweakers described a subscription for advanced security and parental control features.

    Before buying, check the full model range, what’s included in the box and the terms for any features you want to use.

    The advanced features mentioned for the Deco X50 set that was tested required a subscription. Also check whether you’ll need an extra point for your setup.

Brands to compare

TP-Link

The Deco X50 is a dual-band Wi-Fi option with optional Ethernet backhaul. The Deco XE75 Pro is another option in the Deco range, with 6 GHz for anyone considering a wireless setup.

  • TP-Link lists three gigabit ports per point for the X50, as well as support for Ethernet backhaul.
  • In a Tweakers test, speeds from X50 wireless satellites placed further away were lower. This result applies to the set tested and not necessarily to other Deco models. Tweakers also noted that a subscription was required for advanced security and parental control features on that set.

ASUS

The ZenWiFi BD4 offers a dual-band mesh option with wired backhaul. Check AiMesh compatibility for each combination.

  • ASUS lists Wi-Fi 7, wired backhaul and two 2.5-gigabit ports per point for the BD4.
  • The Dutch specifications list different pack sizes, including 3-pack, 2-pack and a single point. The Wi-Fi version or claimed speed alone won’t predict download performance in your hallway.

FRITZ!

The FRITZ!Mesh Set 4200 combines two or three FRITZ!Repeaters 3000 AX. It’s worth comparing if you’re looking for a Wi-Fi 6 set with three radio bands and FRITZ! management.

  • FRITZ! lists two gigabit LAN ports per repeater, updates and a five-year manufacturer’s warranty.
  • These are the manufacturer’s specifications and terms, not proof that downloads will be faster in your home.

Linksys

Velop Pro 6E is a tri-band option with 6 GHz and support for wired or wireless backhaul.

  • Linksys describes both backhaul options for the Velop Pro 6E.
  • According to Linksys installation instructions, Cognitive Mesh nodes must first be added via the app. Cognitive Mesh isn’t backwards compatible with Velop Intelligent Mesh.

Netgear

Orbi 770 is a tri-band Wi-Fi 7 option to explore if you need a larger wireless mesh setup. Check the exact version before buying.

  • Netgear describes Enhanced Backhaul for the RBE770 series as a wireless connection that shares capacity across 5 and 6 GHz.
  • This model-specific technology isn’t a separate backhaul radio. Base your choice on the connection at the point where you plan to place the mesh point, too.

Mesh systems at Joybuy

This Joybuy selection includes mesh systems with two or three points. Check the connection options for each model and place the points where they can maintain a usable connection to one another. The Radiocommunications Agency Netherlands requires radio equipment to carry the correct CE marking; before use, check that the equipment you receive has this marking.

TP-Link Deco BE68 2-pack mesh system

TP-Link Deco BE68 2-pack

A set with two points gives you two positions to test along the route to the end of the hallway.

Check the product specifications to make sure the connection method and ports you need suit your setup.

View at Joybuy
TP-Link Deco M4 3-pack, dual-band Wi-Fi 5

TP-Link Deco M4 3-pack

With three points, you can try different positions in the hallway. Check that each point still gets a good connection to the one before it.

Dual-band (2.4 GHz and 5 GHz), Wi-Fi 5 (802.11ac).

View at Joybuy
TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 3-pack

This three-point set is worth considering if you want to test several positions and are thinking of running a cable between points.

Dual-band (2.4 GHz and 5 GHz), Wi-Fi 6 (802.11ax). TP-Link lists three gigabit ports per point for the X50, as well as optional Ethernet backhaul. In a Tweakers test, speeds from wireless satellites placed further away were lower; this test relates to the X50 set that was tested.

View at Joybuy
TP-Link Deco S7 3-pack, dual-band Wi-Fi 5

TP-Link Deco S7 3-pack

A 3-pack gives you several options for trying an intermediate position before placing a point somewhere with a weak signal.

Dual-band (2.4 GHz and 5 GHz), Wi-Fi 5 (802.11ac).

View at Joybuy
TP-Link Deco XE75 Pro 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro 3-pack

This tri-band 3-pack is worth comparing if you want to connect the points wirelessly. Check the connection at the planned locations in your home.

Tri-band (2.4 GHz, 5 GHz and 6 GHz), Wi-Fi 6E (802.11ax).

View at Joybuy

Frequently asked questions

How can you tell whether mesh will help with downloads at the end of the hallway?

First, test your internet speed using a network cable at the router, then compare it with the connection where you download. If the wired test is also disappointing, check your internet connection first or contact your provider.

Where should you place a wireless mesh point in a long hallway?

Don’t wait until you reach the spot where the signal is already weak. Try an intermediate position with as few obstacles as possible, use the setup app to check that the points can connect properly, then test the connection where you download.

What maintenance and service terms should you check?

Check whether the extra features you want require a subscription, and keep your router and mesh points up to date. ACM ConsuWijzer explains that there is no fixed statutory guarantee period for all products. If a product proves faulty under normal use, the seller is responsible for providing an appropriate solution. Any manufacturer’s warranty is separate.

Do you need a permit or registration to use Wi-Fi at home in the Netherlands?

According to the Radiocommunications Agency Netherlands, you don’t need to notify anyone or register to use Wi-Fi frequencies without a permit, but certain conditions apply. Also check that the radio equipment you receive carries the correct CE marking, and follow the instructions for use.