Who is this relevant for?

Workshop participant dealing with interruptions

You’re attending or presenting from a fixed workspace and want to find out whether the interruptions are caused by Wi-Fi or your internet connection. Microsoft Support lists router placement and obstructions as factors to consider when checking your connection.

Home worker whose office is out of range

Your connection works well near the modem, but your home office is further away or separated by walls and floors. In that case, the results of a test at your workspace and the possible location of an additional node will help you decide what to do.

Household with several people using the network at once

While you’re in your workshop, other people at home are also using Wi-Fi. In 2021, KPN reported that a third of the Wi-Fi users it surveyed typically shared their connection with three or more people at the same time.

What should you consider when choosing?

Test your existing connection first

Choose this if: you’re attending from a fixed workspace and aren’t yet sure whether Wi-Fi or your internet connection is causing the interruptions.

Bear in mind: a wired test limits your freedom to move around and won’t fix a shortfall with the internet connection itself.

One router

Choose this if: you can position the router well and your home office already has good coverage.

Bear in mind: one access point may not provide enough coverage over longer distances or through obstructions.

Wired access point

Choose this if: your internet connection is good but Wi-Fi is still weak in your home office, and you can run a network cable to a suitable location.

Bear in mind: you’ll need a route for the cable, an additional device and a power socket. Check the operating mode of the model you choose.

Mesh with wireless nodes

Choose this if: you need coverage in several areas and running cables between the nodes isn’t practical.

Bear in mind: additional nodes need space and power, and won’t solve a lack of speed from your internet connection.

What to consider What to look for Who should pay particular attention?
Reliable calls Test at your workspace and, if possible, using a wired connection. Compare upload and download speeds with the requirements of your workshop service. If I want to attend or present from one fixed location, I first want to know whether my connection there is reliable enough. Around 36% of consumers prioritise a reliable workshop call.
Coverage in your home office Test at your workspace and consider where an additional node could go and whether you can run a cable between the devices. When my home office is out of range of the current access point, I want a solution that brings the signal to that specific area. Around 29% of consumers give coverage in their workspace top priority.
Simultaneous use Check how many devices will be active during your workshop and test the connection under those conditions. Also check that your router and laptop support the Wi-Fi standard you’ve chosen. If other people at home are online at the same time, I want to know whether the connection can handle my workshop alongside their activity. Around 21% of consumers prioritise capacity for simultaneous use.
Easy to manage Check the settings needed to connect to your modem, the access point mode and how to update the device. If I want to keep using my existing modem, I’m looking for a setup I can connect and maintain without unnecessary complexity. Around 14% of consumers give ease of management top priority.

Common buying mistakes

  • Buying a new router without testing your internet connection

    Replacing your local Wi-Fi transmitter alone won’t fix a weak or overloaded internet connection.

    Test the connection at your workspace and, if possible, compare it with a wired test. Check both upload and download speeds.

  • Expecting one faster router to provide coverage everywhere

    Distance, walls and floors can weaken the Wi-Fi signal at your workspace. Microsoft Support also points out that 5 GHz has a shorter range and passes through obstructions less effectively than 2.4 GHz.

    Choose your setup based on a test in your home office, and see which locations are available for an access point or additional mesh node.

  • Assuming the advertised Mbps figure is your workshop speed

    An advertised wireless data rate is a theoretical device specification. Your connection during a workshop also depends on the equipment you use, its placement and your internet connection.

    Check the requirements of your workshop service and test the connection where you’ll be taking part.

  • Overlooking the number of units and extra mesh features

    Mesh systems are available with different numbers of nodes. For the Deco X50, TP-Link lists a free basic HomeShield package, with possible charges for the Pro package.

    Check how many nodes the set you choose includes, how you can connect them and which features are available without a paid package.

Brands to consider

TP-Link

TP-Link offers standalone routers and mesh systems, including the Archer AX55 and Deco X50. These product ranges give you different options, whether you want to use one access point or need several.

  • According to TP-Link, the Archer AX55 supports Wi-Fi 6, and the Deco X50 can use optional Ethernet backhaul.
  • Advertised speeds and coverage are manufacturer figures, not measurements taken in your home office. Check the number of nodes and the hardware version; some additional services may require payment.

ASUS

According to ASUS, the RT-AX59U is a standalone Wi-Fi 6 router with several operating modes, including access point and AiMesh modes.

  • ASUS lists three Gigabit LAN ports and several operating modes for this model.
  • You’ll need compatible additional equipment to extend an AiMesh network. The advertised theoretical Wi-Fi speed isn’t a measured workshop speed.

FRITZ!

According to the manufacturer, the FRITZ!Box 4060 is a router that connects to an existing modem and offers mesh and telephone features.

  • FRITZ! lists a 2.5 Gigabit WAN port, three Gigabit LAN ports and a five-year manufacturer’s warranty.
  • This model doesn’t replace a built-in DSL, cable or fibre modem. Extra features aren’t necessarily needed for a workshop.

NETGEAR

According to NETGEAR’s support information, the Orbi RBK352 is a dual-band Wi-Fi 6 mesh system with two units.

  • A mesh set with several units is one option to consider for coverage in different areas.
  • The product information doesn’t demonstrate improved performance in your particular home office. Check the set and positioning you need.

Router and mesh options at Joybuy

These products include standalone Wi-Fi routers and mesh systems for a home workspace where you want to improve the connection for a virtual workshop. Before buying, check that the product is compatible with your existing modem and that the hardware version actually being offered has a CE mark.

TP-Link Deco E4 mesh system, 3-pack

TP-Link Deco E4 (3-pack)

This mesh system with three units is an option if you need Wi-Fi in several areas.

Dual-band Wi-Fi 5 (2.4 GHz and 5 GHz); two Ethernet ports per unit, up to 100 Mbps.

View at Joybuy
ASUS RT-AX52 AX1800 router

ASUS RT-AX52 AX1800

A standalone dual-band Wi-Fi 6 router for a workspace where you connect wirelessly.

Three Gigabit Ethernet ports and a separate WAN port; the product description lists OFDMA and MU-MIMO.

View at Joybuy
TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50 (3-pack)

This mesh system with three units is an option if you need Wi-Fi in several areas.

Wi-Fi 6; three Gigabit ports per unit and optional Ethernet backhaul.

View at Joybuy
ASUS RT-AX52 Pro AX3000 router

ASUS RT-AX52 Pro AX3000

A dual-band Wi-Fi 6 router for a wireless home workspace; the description also mentions AiMesh compatibility.

Gigabit Ethernet ports; the product description lists OFDMA and MU-MIMO.

View at Joybuy
TP-Link Deco X50-POE mesh system, 2-pack

TP-Link Deco X50-POE (2-pack)

This mesh system with two units is an option if you need Wi-Fi in several areas and PoE support is useful for your installation.

Dual-band Wi-Fi 6; two Ethernet ports per unit and WPA3.

View at Joybuy

Frequently asked questions

What speed should you check for a workshop?

Check the requirements of your workshop platform and test both upload and download speeds at your workspace. For example, Zoom estimates a peak of 2.6 Mbps upload and 1.8 Mbps download for a 720p group call. These figures aren’t universal requirements for every workshop or video service.

Can you use your own router with your provider’s modem?

Yes. According to ACM ConsuWijzer, you’re free to choose your router. Check which settings your connection requires. If you want to keep your provider’s modem and only improve your Wi-Fi, a model with access point mode may be suitable. Keep the device up to date.

Should you buy a mesh system straight away if your picture or sound keeps freezing?

No. First, test the connection at your workspace and, if possible, compare it with a wired test. Mesh can help with a local coverage problem, but it won’t fix every cause of interruptions, such as a shortfall in your internet connection.

What warranty and cooling-off period apply to online purchases in the Netherlands?

As well as any manufacturer’s warranty, you’re entitled to a product that lasts for as long as you can reasonably expect under normal use. ACM ConsuWijzer does not specify a fixed general period of two years. For a typical online consumer purchase, you generally have 14 days from delivery to change your mind, subject to statutory exceptions.

Do you need a licence for ordinary home Wi-Fi?

The Dutch Authority for Digital Infrastructure gives Wi-Fi as an example of frequency use that, under the applicable conditions, doesn’t require a licence, notification or registration. If you’re buying a router for the Dutch market, check that the version actually being offered has a CE mark and follow the instructions for use.