Who is this choice relevant to?

Video caller in the loft

You have meetings upstairs and find that the coverage or call quality isn’t good enough there. A general coverage claim doesn’t tell you how well the connection will work in your home office.

Homeowner with network cabling

You can connect one floor with a cable and are looking for Wi-Fi points that support Ethernet backhaul, so they can be connected to each other via the network cable.

Homeowner without a cable route

You may want to keep your existing router and are comparing wireless nodes with Wi-Fi over your electrical wiring.

What should you consider when choosing?

For video calls on another floor, what matters is the connection in your work area, not just the stated coverage of a kit.

Wired access point or mesh

When: if there’s a usable network cable running to the floor where you have your meetings.

Consider: check the cable route, ports and any power requirements. A wired connection between Wi-Fi points won’t automatically increase the speed of your broadband package.

Wireless mesh

When: if you can’t run a cable, but can position nodes where they still have a usable connection of their own.

Consider: a node placed in an existing dead zone won’t fix a weak connection to the previous node. Test the set-up where you have your meetings.

Powerline with Wi-Fi points

When: if there’s no network cable and wireless nodes can’t provide good coverage on the floor where you have your meetings.

Consider: devolo says that factors including electrical interference and the quality of the electrical installation affect actual throughput.

What to consider What should you check? Who does this matter most to?
Coverage on the floor where you have your meetings Test the connection in your work area and find out where an extra node can still get a usable signal. If I have meetings in the loft, I want to know whether Wi-Fi works there, not just what the packaging says about coverage. Around 36% of consumers prioritise coverage on the floor where they have their meetings.
Stability during calls Check whether Ethernet backhaul is possible and review the network information in your meeting app. I want to avoid interruptions during video calls, even if the coverage seems adequate on paper. Around 29% of consumers prioritise call stability.
Connection to your provider’s router Decide whether the new system will work as an access point or the main router, and check which features are available in that mode. If you want to keep your provider’s router, you’ll want to know in advance whether the new Wi-Fi system will work with it. This is the main buying concern for around 21% of consumers.
Cost and maintenance Check the number of Wi-Fi points, the power supply or cabling required, and firmware support. If I’m looking for an affordable, easy-to-maintain set-up, I also want to know which components and product requirements are involved. Around 14% of consumers prioritise cost and maintenance.

What to watch out for when buying

  • Assuming a coverage claim guarantees a signal in the loft

    A stated coverage area isn’t a measurement of the connection in your home or where you have your meetings.

    Assess the set-up where you have your meetings, and consider where you place the nodes.

  • Confusing a PoE model with the standard version

    The TP-Link Deco X50-PoE has different connections and power requirements from the standard Deco X50. According to TP-Link, the X50-PoE supports IEEE 802.3at and 802.3bt, but not IEEE 802.3af.

    Check the full model number and supported PoE standard before choosing network components.

  • Assuming powerline speeds are guaranteed between floors

    According to devolo, factors including electrical interference and the quality of the electrical installation can affect actual throughput.

    Assess this option using the sockets in question and the place where you have your meetings.

  • Assuming access point mode keeps all router features

    TP-Link says that certain features in the Deco app aren’t available when the system is in access point mode.

    Decide in advance which device should manage your network features, and check what the mode you choose can do.

Brands to consider

TP-Link

The Deco X50 is a Wi-Fi 6 mesh system with optional Ethernet backhaul. The X50-PoE is a different model, designed for installation and power via a suitable network connection.

  • According to TP-Link, the standard Deco X50 has three gigabit ports per node and supports Ethernet backhaul.
  • For power over Ethernet, TP-Link says the X50-PoE requires IEEE 802.3at or 802.3bt. Don’t confuse the two models.

ASUS

The ZenWiFi XD5 is a three-pack Wi-Fi 6 mesh option, with the ability to connect Wi-Fi points via Ethernet backhaul.

  • ASUS describes Ethernet backhaul as an option for homes with network sockets in the walls.
  • Some Wi-Fi 6 features require compatible devices. ASUS also says that 160 MHz may be restricted in some regions. A coverage claim isn’t a measurement in your home.

devolo

The Magic 2 WiFi 6 next Multiroom Kit combines powerline with Wi-Fi points for homes without a usable Ethernet route.

  • According to devolo, the kit contains three adapters: one LAN adapter and two Wi-Fi adapters.
  • devolo warns that actual powerline throughput also depends on interference and the electrical installation.

NETGEAR

The Orbi 370 RBE373 is a three-piece dual-band Wi-Fi 7 mesh system for anyone comparing options with 2.5-gigabit network ports.

  • The product specifications and coverage claim come from NETGEAR.
  • That claim isn’t a measurement in a three-storey home. Wi-Fi 7 or a faster port doesn’t, by itself, guarantee a more stable video call.

FRITZ!

FRITZ! Mesh Sets and repeaters are options for extending your network, particularly if you already use FRITZ! equipment.

  • KPN lists the FRITZ!Repeater 1200 AX as an add-on for a FRITZ!Box. FRITZ! also says that the Mesh Set 1700 can be used with another router.
  • Check the features of the specific set when using it with another router. A standalone repeater isn’t automatically a full replacement for your router.

Wi-Fi systems at Joybuy

These products are mesh kits that extend Wi-Fi around your home using multiple points. Check the relevant product information and CE marking for the specific model. The Dutch Authority for Digital Infrastructure outlines the requirements for radio equipment sold in the EU.

TP-Link Deco BE68 mesh kit, 2-pack

TP-Link Deco BE68 (2-pack)

A mesh kit with two units included, for extending Wi-Fi across multiple points.

The product description lists tri-band Wi-Fi 7, MLO, and both wired and wireless backhaul.

Shop at Joybuy
TP-Link Deco X50 Wi-Fi 6 mesh kit, 3-pack

TP-Link Deco X50, dual-band Wi-Fi 6 (3-pack)

A set of three Deco X50 units for extending mesh coverage across multiple floors.

The product description lists optional Ethernet backhaul and three gigabit ports per unit.

Shop at Joybuy
TP-Link Deco XE75 Pro mesh kit, 3-pack

TP-Link Deco XE75 Pro, tri-band Wi-Fi 6E (3-pack)

A mesh kit with three units for spreading Wi-Fi across multiple points in your home.

The product description lists tri-band Wi-Fi 6E on 2.4, 5 and 6 GHz.

Shop at Joybuy
TP-Link Deco XE75 mesh kit, 3-pack

TP-Link Deco XE75, tri-band Wi-Fi 6E (3-pack)

A mesh kit with three points included for Wi-Fi coverage across multiple areas of your home.

The product description lists tri-band Wi-Fi 6E on 2.4, 5 and 6 GHz.

Shop at Joybuy
TP-Link Deco X50-PoE Wi-Fi 6 mesh kit, 3-pack

TP-Link Deco X50-PoE, Wi-Fi 6 (3-pack)

A mesh kit with three units for anyone considering power over Ethernet.

The product description lists two Ethernet ports per unit. According to TP-Link, this model supports IEEE 802.3at and 802.3bt for PoE, but not IEEE 802.3af.

Shop at Joybuy

Frequently asked questions

Do I need to replace my provider’s router to make video calls upstairs?

No, not necessarily. A compatible mesh system can connect to an existing router as an access point, but check which features aren’t available in that mode. If you want to replace your router, check the connection requirements and settings with your provider.

Where should I place a wireless Wi-Fi point?

Don’t place it only where the signal has already dropped out: the point itself needs a usable connection to the network. KPN recommends placing it roughly halfway between the modem and the area where you need better Wi-Fi. Then test the connection where you have your meetings.

How can I investigate interruptions during a Teams call?

Microsoft Support explains that Teams provides call data to help you investigate issues with the network, audio and video, among other things. Use this information alongside a check of the connection in your work area; don’t assume the router is to blame without first diagnosing the problem.

What legal requirements should I check for a new Wi-Fi router?

The Dutch Authority for Digital Infrastructure says that radio equipment sold in the EU must meet the applicable requirements and carry a CE marking. Check the information for the specific model you want to buy.

Can a PoE Wi-Fi point work without a separate power adapter?

Yes, if the point is powered via a suitable Ethernet connection and power source. For the Deco X50-PoE, TP-Link specifies IEEE 802.3at and 802.3bt, not 802.3af. The manufacturer lists a DC adapter as an alternative included in the box.