Who are these solutions for?

Making video calls behind a single thick wall

Your connection is weak mainly at one workspace, and you’re looking for a spot in between where the repeater can still receive a good signal from the router. The Consumers’ Association recommends keeping obstacles between Wi-Fi points to a minimum.

Working from home and able to run an Ethernet cable

You can run a cable to your workspace and want to avoid relying on a wireless connection through the wall. TP-Link Netherlands describes an access point as an alternative when distance or obstacles make a stable wireless connection difficult.

Living somewhere without a cable route

Running a cable or finding a suitable spot in between is difficult, so you want to know whether Wi-Fi over the electrical wiring will work. Devolo lists the quality of the electrical installation and interference among the factors that affect the actual powerline connection.

What should you consider when choosing?

Start with the type of connection you can set up at your meeting spot: wirelessly from a suitable position in between, via Ethernet or through the electrical wiring.

What to consider What should you check? Who is this important for?
Coverage through and around thick walls Check whether there’s a spot before the room with the weak signal where reception from the router is still good. See whether a signal indicator or setup app can help you find the right position. If you want to reach a single workspace, first look for a suitable spot in between. Around 36% of consumers put coverage first.
A connection without a wireless hop through the wall Check whether you can run an Ethernet cable. If not, see whether you can use the required powerline adapters in the sockets you have in mind. If you want to avoid the weak wireless connection, your choice comes down to finding an alternative route to your workspace. Around 29% of consumers prioritise this need.
Compatibility with your router and devices Check general router compatibility separately from brand-specific mesh features, and see which LAN or access point modes are available. Compatibility is crucial if your existing router needs to work with the network features you want. Around 21% of consumers prioritise compatibility.
Cost and scale of the solution Compare how many devices and cables you’ll need, if any. Factor in the stated energy consumption if the equipment will be switched on all the time. If you’re looking for a solution for one workspace, you don’t want to buy extra units unnecessarily. Around 14% of consumers prioritise the overall size and running costs of the solution.

Common buying mistakes

  • Placing a repeater where the router signal has already dropped out

    A wireless repeater needs a usable connection to the router itself. If there’s no signal where you place it, it won’t be able to reliably extend the connection to your meeting spot.

    First, check whether there’s a suitable spot in between. If there isn’t a usable signal there, consider a wired access point or powerline instead.

  • Assuming the maximum speed guarantees good video calls

    Advertised maximum speeds don’t tell you what the connection will be like during your meeting. Devolo notes that powerline performance can be affected by network traffic, interference on the electrical wiring and the quality of the electrical installation.

    Test the connection where you’ll be holding your meetings and, for powerline, in the sockets you actually plan to use.

  • Assuming mesh offers the same features with every router

    Mesh features and the ability to copy settings can depend on the router and product range. FRITZ! describes automatic pairing with a FRITZ!Box; this feature isn’t automatically available with other routers.

    Check the exact combination of router and repeater, and which mesh or management features you want to use with it.

Relevant brands

TP-Link

The RE705X is an example of a standalone Wi-Fi 6 repeater that can also work as an access point.

  • According to the official model specifications, the RE705X supports OneMesh and access point mode via its Gigabit Ethernet port.
  • OneMesh doesn’t guarantee mesh functionality with every router, and wireless placement still requires a good signal.

FRITZ!

The FRITZ!Repeater 1200 AX is worth considering if its features suit your FRITZ! setup, or if you can use a LAN connection.

  • According to FRITZ!, the model has a Gigabit LAN port, can connect to a FRITZ!Box via LAN and also works with other routers.
  • You shouldn’t assume that FRITZ!Box settings will transfer automatically when you use another router.

NETGEAR

The EAX12 is a Wi-Fi 6 mesh extender with a Gigabit Ethernet port, and is another standalone extender to consider.

  • The official model page lists Wi-Fi 6 and a Gigabit Ethernet port.
  • Product specifications can’t tell you how well video calls will work behind the walls in your home.

devolo

Magic powerline with Wi-Fi offers an alternative route when the wireless connection through the wall is poor and running an Ethernet cable isn’t practical.

  • According to devolo, the connection runs through the electrical wiring.
  • Devolo lists interference and the quality of the electrical installation as factors affecting actual speeds, so try the connection in the sockets you plan to use.

Products at Joybuy

This selection includes powerline over existing wiring, mesh systems with multiple units, and access point or repeater options. Choose based on the type of connection you can set up in your home.

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT Powerline Adapter Starter Kit

A powerline starter kit to consider if you want the connection to your workspace to run through the electrical wiring instead of wirelessly through the wall.

The product name describes a powerline adapter starter kit.

View at Joybuy
TP-Link Deco X50 mesh Wi-Fi system, 3-pack, dual-band, Wi-Fi 6

TP-Link Deco X50 (3-Pack) Dual-Band Wi-Fi 6

A multi-unit mesh system to consider if you need coverage in other rooms as well as at your meeting spot.

3-pack; dual-band (2.4 GHz/5 GHz); Wi-Fi 6 (802.11ax).

View at Joybuy
TP-Link Deco X50-POE mesh Wi-Fi system, 2-pack, dual-band, Wi-Fi 6

TP-Link DECO X50-POE (2-PACK) Dual-Band Wi-Fi 6

A mesh system to consider if a wired setup is possible and you want to use multiple units.

2-pack; dual-band (2.4 GHz/5 GHz); Wi-Fi 6 (802.11ax); PoE.

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi network extender

TP-Link TL-WA801N Wireless Access Point/WiFi Network Extender

Worth considering if you’re looking for a wireless extender or want to use an access point via an Ethernet connection. Check which mode suits your setup.

The product name lists N up to 300 Mbps, 2 antennas, WPS and Passive PoE. The stated specifications include 2.4 GHz Wi-Fi and 10/100 Mbit/s Ethernet ports.

View at Joybuy
TP-Link Omada EAP613 wireless access point with Power over Ethernet

TP-Link Omada EAP613 Wireless Access Point

An access point to consider if you can run an Ethernet cable to the place where you need Wi-Fi.

The product name lists Power over Ethernet (PoE) and 1775 Mbps.

View at Joybuy

Frequently asked questions

Will a repeater help if the signal drops out completely in my home office?

Only if you can place it somewhere in between where it still receives a good signal from the router. If distance or obstacles make that impossible, TP-Link Netherlands describes Ethernet with access point mode as an alternative.

Should I put a repeater next to my laptop?

Not necessarily: the repeater still needs a usable connection to the router itself. The Consumers’ Association recommends choosing a spot with as few obstacles as possible between the Wi-Fi points. A placement light or app can help you find a suitable position.

How should I assess setup and performance after buying?

Check whether the setup guide lets you assess signal quality at your chosen spot. Factor security and energy consumption into your comparison too; the Consumers’ Association includes these in its test programme for Wi-Fi extenders.

What should I check to ensure a product complies with requirements in the Netherlands?

The Dutch Authority for Digital Infrastructure states that manufacturers, importers and sellers of radio equipment must comply with the applicable European requirements, and that the equipment must carry the CE marking. A mention in an advert is not, in itself, a check of an individual product.