Who is this guide for?

Video calls from the room beyond the kitchen

You take meetings in a different room from the one with your router and want to know whether the connection is weaker where you work. Ziggo lists kitchen appliances and obstacles among the potential things to consider with Wi-Fi.

Home worker who can run cables

You can run an Ethernet cable to an additional Wi-Fi access point and would rather not rely on wireless backhaul for the connection between access points. TP-Link describes Ethernet backhaul for Deco systems.

Home worker who can't run cables

You want to extend coverage with wireless mesh, but need to take the connection between nodes into account. In a review of the Deco X50, Tweakers described limitations for clients connected further away via wireless satellites.

What should you consider when choosing?

First, test the Wi-Fi where you take your meetings and move the router if possible. Then decide whether you can run a cable or need a wireless access point.

What to consider What to look for when buying Who is this most relevant to?
Coverage where you take meetings Compare the connection by the router with the one in your meeting room; see whether you can place your router or node somewhere less obstructed. If my meeting drops out beyond the kitchen, I want to know whether the connection is weak specifically where I work before buying extra access points. Around 40% of consumers prioritise coverage in that spot.
Connection between Wi-Fi access points Check whether the system supports Ethernet backhaul; if not, assess where a node can still get a good signal. If I can run a cable, I don't want the connection between access points to rely on Wi-Fi. Without a cable, the node still needs to get a good signal itself. Around 32% of consumers give the connection between Wi-Fi access points top priority.
Compatibility with your home network Check whether you want to keep your provider's router and which operating mode suits your existing setup. I want to keep my provider's device and first check whether an additional access point or mesh system will work with it. Around 14% of consumers prioritise compatibility with their existing setup.
Cost and features you need Consider which features you need and whether your chosen setup requires extra nodes or cables. I don't want to pay for extra access points or features before I know I need them. Around 14% of consumers give avoiding unnecessary purchase and feature costs top priority.

Common buying mistakes

  • Assuming a high advertised Wi-Fi speed guarantees smooth video calls

    Actual coverage and throughput depend on your home and any obstacles. In the Deco X50 manual, TP-Link warns that actual performance and coverage are not guaranteed.

    Test the connection where you take meetings before choosing a new device. Then assess where to place it and the route between any nodes.

  • Placing a wireless mesh node where the Wi-Fi signal is already weak

    The node still needs a usable connection to the main router. In a Tweakers test of the Deco X50, client throughput fell behind further away when using wireless satellites.

    Check the connection where you plan to place the node. If you can run a cable, see whether your chosen system supports Ethernet backhaul.

    Depending on your setup, you may still need an additional Wi-Fi access point or network cable.

  • Assuming all advanced security features are included

    For the Deco X50 tested by Tweakers, some advanced security and parental control features required a subscription.

    Before buying, check which features are included with the exact version and what terms and conditions apply.

    Some features you want may require an ongoing subscription; check the terms and conditions for the version you choose.

Brands to consider

TP-Link

According to TP-Link, the Deco X50 is a Wi-Fi 6 mesh option with multiple access points that you can place around your home and optional Ethernet backhaul.

  • Tweakers described setting up the Deco X50 as straightforward in a test.
  • In that test, client throughput lagged behind with wireless satellites further away in the network; this result applies to the setup tested.

ASUS

The ZenWiFi XD5 is a mesh option if you may be able to connect the nodes via Ethernet.

  • ASUS lists Ethernet backhaul for the ZenWiFi XD5 when Ethernet ports are available.
  • This is a manufacturer specification; check that the cabling and planned setup will work in your home.

FRITZ!

According to FRITZ!, the Mesh Set 2700 can be used with an existing router or modem.

  • The manufacturer describes connecting to an existing router or modem as one possible setup.
  • This connection option doesn't guarantee coverage through your kitchen; check how it will work in your home.

Netgear

Orbi mesh systems are an option to compare when considering wireless backhaul.

  • Tweakers included the Orbi RBK762 in a comparison of mesh architectures.
  • Being included in that test isn't a general buying recommendation and doesn't guarantee performance in your home.

Products at Joybuy

This selection includes mesh systems with multiple units and a standalone ASUS router. The right option for you depends in part on the connection where you work and whether you can connect nodes with a cable.

TP-Link Deco BE68 mesh system with two units

TP-Link Deco BE68 (2-pack)

This mesh system includes two Deco units and is an option if you want to reach your meeting spot through multiple Wi-Fi access points.

Joybuy
TP-Link Deco E4 mesh system with three units

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5

This set of three Deco units is designed for anyone who wants to place multiple Wi-Fi access points. Check where an additional unit can still get a good connection.

Joybuy
ASUS RT-AX52 AX1800 AiMesh router

ASUS RT-AX52 AX1800 AiMesh router

A standalone router for anyone who may want to expand later with other compatible ASUS routers; check that this setup will work with your network.

Joybuy
TP-Link Deco X50 mesh system with three units and Wi-Fi 6

TP-Link Deco X50 (3-pack), Wi-Fi 6

This mesh system with three nodes is an option if you want to use multiple Wi-Fi access points. The product information lists optional Ethernet backhaul for anyone who can connect the nodes with a cable.

Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600, dual-band Wi-Fi 7 mesh router

A mesh router for anyone who wants to extend Wi-Fi across multiple units; check which units and setup will suit your planned arrangement.

Joybuy

Frequently asked questions

Should you buy a faster router straight away for video calls beyond the kitchen?

No. First, test the connection where you work and, if possible, move your existing router to a high, unobstructed spot. Ziggo lists microwaves and materials such as metal and concrete as potential sources of interference or signal loss. An advertised maximum speed doesn't predict coverage in that spot.

Where should you place an additional Wi-Fi access point?

Place it somewhere it can still connect well to the main router and reach your meeting spot more effectively. Check the connection before positioning the node permanently. If you can run a cable, see whether your chosen system supports Ethernet backhaul.

How can you check whether Wi-Fi or your internet connection is affecting your call?

Compare the connection and call quality where you work with those close to the router. If possible, also try using Ethernet. For group video at 720p, Zoom gives reference figures of 2,6 Mbps upload and 1,8 Mbps download. These apply to that Zoom configuration and aren't general speed thresholds for routers or other meeting services.

Can you use your own router in the Netherlands?

Yes. ACM ConsuWijzer says that a provider can't require you to use a particular router brand or model. Check which connection details and settings your provider gives you, and decide whether to replace the provider's device or simply extend your Wi-Fi.

What product requirement should you check when buying in the Netherlands?

The Netherlands Radiocommunications Agency states that radio equipment placed on the market in Europe must meet the applicable requirements and carry a CE mark. Since 1 August 2025, stricter digital security requirements have also applied to relevant wireless equipment. Don't assume a specific version complies based on a search result alone.