Who could benefit from extending their Wi-Fi?

Households with simultaneous video calls

If several people are on calls at the same time, the connection at each workspace matters. The Dutch Consumers’ Association describes a Wi-Fi test involving multiple devices on the network; Microsoft Learn identifies latency, jitter and packet loss as factors in assessing network performance for Teams.

Home workers in areas with a weak Wi-Fi signal

If the connection is weaker at your regular workspace than it is near the router, where you place a repeater may make a difference. NETGEAR recommends placing an extender within the router’s Wi-Fi range.

Home workers with an Ethernet cable

If you can run an Ethernet cable to your workspace, you can compare a wired access point with wireless coverage extension. devolo describes using an access point as an option when an Ethernet cable is already available.

What should you look for when choosing?

Wireless repeater

A good fit if: you mainly want to improve coverage in one workspace and can find a spot where the router’s signal is still usable.

Things to consider: the repeater still relies on its wireless connection to the router.

Wired access point

A good fit if: there’s an Ethernet cable running to your workspace and the device supports access point mode.

Things to consider: this setup requires the right cabling and mode or connection.

Mesh with multiple Wi-Fi points

A good fit if: several rooms or floors have coverage problems.

Things to consider: check how the Wi-Fi points communicate with each other and whether they work with your router.

What to consider What should you check? Who is this most relevant to?
Connection during multiple calls Compare the connection at your workspaces during simultaneous calls, and test it near the router too. If several people at home are on calls at the same time, I want to know whether the connection remains usable at their workspaces. Around 36% of consumers say simultaneous calls are their top buying priority.
Coverage at one regular workspace Find a possible midway spot where the repeater can still receive a usable signal from the router. At my regular workspace, I mainly want to improve coverage without placing the repeater in an area with virtually no router signal. For around 29% of consumers, coverage in one spot comes first.
Wired connection Check whether there’s an Ethernet cable running to the location and whether the device supports access point mode. If I can run a cable to my workspace, I want to know whether it can connect the Wi-Fi point to the network. Around 21% of consumers prioritise a wired setup.
Router compatibility Check the exact router model and the mesh features it supports. Also check whether standard repeater mode is available. If I want to keep using my existing router, I need to know whether it works with the features I want. For around 14% of consumers, router compatibility is the top priority.

Common buying mistakes

  • Placing a repeater in a dead spot

    A repeater can’t turn a weak signal it receives into a strong connection to the router.

    First, find a midway spot where the repeater still has a usable connection to the router.

  • Assuming a stated Wi-Fi speed guarantees good video calls

    Maximum Wi-Fi speed alone doesn’t tell you how calls will perform when several people are online or how good your internet connection is.

    Compare the connection during simultaneous calls, and treat stated speeds as product specifications rather than measurements taken at your workspace.

  • Assuming every repeater will work seamlessly with your mesh network

    Features such as OneMesh, AiMesh and FRITZ! Mesh may require a compatible router.

    Check the exact router model and the mesh features supported by the device you’ve chosen.

Brands to consider

TP-Link

The RE605X is a Wi-Fi 6 repeater for extending an existing network, with Gigabit Ethernet and access point mode.

  • According to TP-Link, the RE605X can work with existing Wi-Fi routers.
  • OneMesh requires a compatible OneMesh router; stated wireless speeds don’t measure video call quality.

FRITZ!

The FRITZ!Repeater 1200 AX is worth considering if you want to extend a FRITZ!Box network or use a LAN connection.

  • FRITZ! lists a Gigabit LAN port and compatibility with other routers.
  • The stated compatibility with FRITZ! Mesh doesn’t mean the same features will work with every router.

ASUS

The RP-AX58 is a Wi-Fi 6 repeater for extending a network or using with a compatible ASUS router.

  • ASUS lists access point mode and compatibility with other routers.
  • AiMesh features require an AiMesh-compatible router; stated speed comparisons aren’t independent measurements of video call performance.

NETGEAR

The EAX15 is a compact Wi-Fi 6 extender with Gigabit Ethernet for extending an existing network.

  • NETGEAR describes app-based setup and the use of a single Wi-Fi name.
  • For wireless extension, the extender needs to be within the router’s range; its stated maximum speed doesn’t guarantee a stable call in a particular spot.

devolo

According to devolo, the WiFi 6 Repeater 5400 can be used as a repeater or access point.

  • devolo describes mesh use with other compatible devolo products.
  • The stated maximum transfer speed isn’t a guaranteed speed for simultaneous video calls.

Products at Joybuy

This selection includes mesh systems for several rooms, wireless Wi-Fi extenders and an access point for a wired setup. Check the connection type for each model and whether the specific device carries the appropriate CE marking.

TP-Link Deco M4 mesh system with three units, dual-band Wi-Fi 5

TP-Link Deco M4, 3-pack, dual-band Wi-Fi 5

This three-unit set is designed to create a mesh network with multiple Wi-Fi points around your home.

Dual-band Wi-Fi 5 (802.11ac); the stated speeds don’t measure video call quality.

Before buying, check whether the specific device carries the appropriate CE marking.

View at Joybuy
TP-Link Deco X50 mesh system with three units, dual-band Wi-Fi 6

TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

This three-unit mesh set is an option for bringing Wi-Fi to several rooms.

Wi-Fi 6 (802.11ax), OFDMA and MU-MIMO; the description lists three Gigabit Ethernet ports per unit.

Before buying, check whether the specific device carries the appropriate CE marking.

View at Joybuy
Wi-Fi Repeater Pro Black

Wi-Fi Repeater Pro Black

This repeater is designed to extend an existing wireless network, for example to one area with a weak signal.

The description lists 2.4 GHz, up to 300 Mbps and support for up to 24 devices. The maximum speed doesn’t measure video call quality.

Before buying, check whether the specific device carries the appropriate CE marking.

View at Joybuy
TP-Link Omada EAP673-Extender, Wi-Fi repeater

TP-Link Omada EAP673-Extender

The product name describes this model as a network repeater for extending an existing network.

The description lists dual-band Wi-Fi 6, QoS and support for up to 250 users; this doesn’t guarantee a particular call quality.

Before buying, check whether the specific device carries the appropriate CE marking.

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender, 300 Mbps, two antennas

TP-Link TL-WA801N, access point and Wi-Fi extender

This model may suit a workspace with an Ethernet cable, as the product name lists access point and extender functions.

The title lists up to 300 Mbps, two antennas, WPS and Passive PoE; the description states 2.4 GHz. The maximum speed isn’t a video call measurement.

Before buying, check whether the specific device carries the appropriate CE marking.

View at Joybuy

Frequently asked questions

Will a repeater help if video calls also stutter near the router?

Not necessarily: a repeater extends Wi-Fi coverage, but won’t automatically improve your internet connection. Compare call quality near the router and at your workspace, including when several people are on calls at the same time.

Where should you place a wireless repeater?

Place a wireless repeater within the router’s range, for example between the router and the workspace with poor coverage. Check the connection indicator at that spot, and don’t automatically put it in a room where virtually no router signal reaches.

Are an Ethernet port and a wired access point the same thing?

No, an Ethernet port doesn’t automatically mean the device can work as a wired access point. Check whether the model has an access point mode that uses the cable to connect the Wi-Fi point to the network. On a wireless repeater, a port may instead be intended for connecting a device to the repeater.

Will every mesh repeater work with your router?

No, mesh features may require a compatible router. Check the exact router model and the features it supports; standard repeater mode and mesh compatibility are separate things.

Do you need a licence for ordinary home Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi is generally licence-exempt, with no notification or registration required for this frequency use, provided the conditions of use are met. Radio equipment placed on the market must meet the applicable requirements and carry the appropriate CE marking.