Who is this relevant for?

Video caller in one distant home office

You mainly have weak Wi-Fi in one fixed workspace and are looking for a place to position a repeater where it can still get a good signal from the router. The placement advice from the Consumers’ Association and the Dutch Authority for Digital Infrastructure can help you decide.

Resident with several rooms that have weak Wi-Fi

It’s not just your home office that has poor coverage; other rooms do too. So you’re comparing several Wi-Fi points and how they connect to one another. The Consumers’ Association explains how Wi-Fi boosters are tested.

Home office user with a possible cable route

You may be able to run a network cable to your home office or to a nearby Wi-Fi point, and want to find out whether a wired access point would suit your setup. For example, TP-Link describes an access point mode for the RE700X.

What should you look for when choosing?

First, work out whether the problem affects one room or several areas of your home. Then check whether you can run a cable to the location you need and which features work with your router.

What to consider What to look for when buying Which consumers is this important for?
Coverage in one distant workspace Compare the signal in your home office with the signal halfway along the route, and check the model’s placement guidance. If I mainly make video calls from one fixed home office, I want usable Wi-Fi there, and the repeater itself still needs to connect to the router. Around 36% of consumers prioritise coverage in one distant workspace.
Several rooms Count the rooms with weak Wi-Fi, then check how many Wi-Fi points are included and how they connect to one another. If other rooms have poor coverage too, I’m looking for a solution that covers more than just my home office. Around 29% of consumers give coverage in several rooms top priority.
Being able to use a cable Check whether you can run a cable from the router to the location you need, and whether the model supports access point mode or ethernet backhaul. If I have a cable route available, I want to know whether I can use it for an access point or a wired connection between Wi-Fi points. Around 21% of consumers base their choice mainly on whether a cable route is available.
Working with your router Make a note of the full router model and check the requirements for OneMesh, FRITZ! Mesh or AiMesh separately if you want to use those features. If I already have a router system I want to keep, I check whether the mesh features I want work with my router. Around 14% of consumers prioritise compatibility with their existing router system.

Common purchasing mistakes

  • Putting a repeater where the original signal is already weak

    A repeater connected wirelessly still needs a usable connection to the router.

    First, find a midway spot with good reception, then check the connection in your workspace. The Consumers’ Association advises against putting the booster where the signal is weakest.

  • Assuming the maximum Wi-Fi speed reflects video call quality

    Obstacles, network congestion and the connection between Wi-Fi points all affect real-world performance. A stated maximum isn’t a measurement of performance in your home.

    Assess the whole connection back to the router and test it where you make video calls, not just next to the new device.

  • Assuming every mesh device shares all its features with your router

    Brand-specific mesh features have specific router requirements. Using a device as a standard extender doesn’t automatically make those features available.

    Check the full router model and the mesh protocol you want. Otherwise, compare using an extender with choosing a suitable complete system.

  • Confusing an ethernet port with a wired connection to the router

    A port on a wireless repeater can connect a device locally while the repeater itself still communicates with the router wirelessly.

    Check that the cable actually runs to the router or network if you want to use access point mode or ethernet backhaul.

    Running a cable may involve extra installation work, so factor in the practicalities of getting it to the location you need.

Relevant brands to consider

TP-Link

The RE700X is a standalone Wi-Fi 6 extender with access point mode. The Deco X50 is a mesh system available as a set or as an individual unit.

  • According to TP-Link, the RE700X has a gigabit port, and the Deco X50 can optionally connect via ethernet backhaul.
  • The RE700X needs a compatible OneMesh router for its OneMesh features. Stated speeds and coverage don’t guarantee performance in your home office.

FRITZ!

The FRITZ!Repeater 1200 AX is a compact Wi-Fi 6 repeater worth considering if you already have a suitable FRITZ!Box.

  • FRITZ! lists a gigabit LAN connection and the option to connect the repeater to a FRITZ!Box via LAN.
  • The FRITZ! Mesh network described requires a compatible FRITZ! setup. Using it with a different router doesn’t automatically give you access to all FRITZ! Mesh features.

ASUS

The RP-AX58 is a Wi-Fi 6 extender worth considering if you want to use it as an AiMesh node with a compatible ASUS router.

  • ASUS describes using it as an extender with routers and specifies a compatible AiMesh ASUS router as a requirement for AiMesh setup.
  • Check compatibility with your exact router model. Manufacturer claims about coverage or speed improvements aren’t a guarantee for a specific home office.

NETGEAR

The EAX15 is a dual-band Wi-Fi 6 wall extender for expanding an existing network.

  • NETGEAR lists a gigabit ethernet port and the option to use your existing Wi-Fi name.
  • The advertised maximum speed of 1,8 Gbit/s isn’t a measured speed or a guarantee of video call performance in a distant room.

Products at Joybuy

This selection includes mesh systems with several Wi-Fi points, a repeater for extending an existing network and a wired access point. In the Netherlands, radio equipment placed on the market must meet the applicable European requirements and carry a CE mark, according to the Dutch Authority for Digital Infrastructure. Check this for the specific version you’re buying.

TP-Link Deco X50 3-pack dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

A set with several Wi-Fi points to consider if more than one room has weak Wi-Fi.

The product name specifies dual-band (2,4 GHz/5 GHz) and Wi-Fi 6 (802.11ax). Optional ethernet backhaul requires ethernet cables between the Deco units.

Joybuy
Wi-Fi Repeater Pro Black

Wi-Fi Repeater Pro Black

A repeater to consider if Wi-Fi is weak in one particular area of your home.

Position a wirelessly connected repeater somewhere it can still get a usable signal from the router. The Consumers’ Association advises placing it between the router and the room, where the signal is strong enough.

Joybuy
TP-Link Deco XE75 tri-band mesh Wi-Fi 6E

TP-Link Deco XE75 tri-band mesh Wi-Fi 6E

A mesh system to consider if you want to extend Wi-Fi to several areas of your home.

The product name specifies tri-band, Wi-Fi 6E (802.11ax) and the 2,4 GHz, 5 GHz and 6 GHz bands. Check that the version and number of units suit your plans for your home.

Joybuy
TP-Link Deco X50 2-pack dual-band Wi-Fi 6

TP-Link Deco X50 (2-pack), dual-band Wi-Fi 6

A set of two mesh points to consider if several areas need better Wi-Fi.

The product name specifies dual-band (2,4 GHz/5 GHz) and Wi-Fi 6 (802.11ax). Optional ethernet backhaul requires ethernet cables between the Deco units.

Joybuy
TP-Link Omada EAP653 Wi-Fi access point

TP-Link Omada EAP653 Wi-Fi access point

An access point to consider if you can run an ethernet connection to your home office or somewhere nearby.

The product name specifies Wi-Fi 6 and Power over Ethernet (PoE). The described wall or ceiling mounting and PoE power supply require a suitable installation; this isn’t a simple plug-in repeater.

Joybuy

Frequently asked questions

Where should I put a wireless repeater?

Put it between the router and your home office, somewhere it can still get good reception. Check the placement guidance for your chosen model, then test the connection in your workspace.

How can I tell whether I need a Wi-Fi booster or a faster internet plan?

First, compare the connection via a network cable at the router with the Wi-Fi in your home office. If the problem mainly affects the distant room, look into placement or adding another Wi-Fi point. If the wired connection is repeatedly much slower than expected too, discuss it with your provider. The Consumers’ Association advises connecting a computer to your home network with a cable when running a speed test.

What internet speed do I need for a video call?

It depends on the service and settings. For group video calls using the web app at 720p HD, Zoom recommends bandwidth of around 2,6 Mbit/s upload and 1,8 Mbit/s download. This doesn’t automatically apply to all video services, and it doesn’t in itself say anything about connection stability.

Will a repeater with mesh features work with every router?

No. Brand-specific mesh features may require a compatible router. TP-Link requires a compatible OneMesh router for OneMesh, ASUS specifies a compatible AiMesh ASUS router for AiMesh, and the FRITZ! Mesh features described require a suitable FRITZ! setup. Check your full router model and the feature you want before choosing.

What are my rights if I’m unhappy with a repeater bought online or it develops a fault too soon?

For an online consumer purchase, you generally have a 14-day cooling-off period from delivery; check the applicable terms and exceptions. In addition, if a product doesn’t do what you could reasonably expect under normal use, the seller must put things right free of charge under the statutory guarantee. This could mean a repair, replacement or refund. ACM ConsuWijzer explains these consumer rights.