Who is this choice relevant to?

Gamer with weak Wi-Fi upstairs

Looking for a reliable connection where they game, and weighing up a cable against a well-placed extra Wi-Fi point. Tweakers and the Dutch Consumers' Association both offer practical advice on home connections and coverage.

Household with multiple streams

Using several screens at once and wanting to know whether the connection and placement work well in every viewing spot. The Dutch Consumers' Association recommends placing Wi-Fi extenders where you need extra signal.

Home without a cable route

With poor coverage upstairs but no easy way to run Ethernet. In this case, the placement and wireless connection of mesh nodes are important considerations.

What should you look for when buying?

Wired access point or mesh node

Choose this option when: you can run an Ethernet cable to your gaming area or upstairs.

Bear in mind: you’ll need to run a cable and choose a suitable spot to connect the extra point.

Mesh with a wireless connection

Choose this option when: running cables isn’t practical and you need extra Wi-Fi coverage upstairs.

Bear in mind: distance, placement and network load; the extra point also needs a good connection to the main unit.

Standalone router

Choose this option when: your tests point to an issue with your current router or settings, and you already have adequate coverage upstairs.

Bear in mind: a standalone router won’t automatically add another Wi-Fi transmission point upstairs.

Test the connection where you game and watch your screens while your other devices are in use. This will show whether you need to focus on coverage, the connection between mesh nodes or capacity for simultaneous use.

Factor to consider What to check when buying Who considers this especially important?
Coverage upstairs Test the signal on the upper floor and compare a wired point with a wireless mesh node. If I need reliable Wi-Fi upstairs, I look beyond the speed next to the router. Around 31% of consumers give upstairs coverage top priority.
Reliable gaming Test the connection while streaming on other devices and check whether you can connect your gaming PC or console by cable. For my gaming area, a reliable connection matters while other devices are in use. Around 31% of consumers prioritise reliable gaming.
Multiple streams Check the speed on each screen while other streams are playing. Netflix recommends a stable connection of 15 Mbps or more for a single 4K UHD stream. If several screens are being used at once, I want to know whether the connection is good enough in every viewing spot. Around 25% of consumers give simultaneous streaming top priority.
Installation and number of points Check how many mesh nodes are included in the set and whether the chosen setup works with your existing modem or router. I want to know in advance how many points I need to place and how the installation will work with my current network. Around 13% of consumers care most about easy expansion.

Common buying mistakes

  • Assuming a higher Wi-Fi speed means better coverage upstairs

    A router with a higher advertised speed won’t automatically add another Wi-Fi transmission point on the upper floor.

    Start by testing the spots where you game and stream. Then decide whether you need an extra point and whether you can connect it by cable.

  • Placing a wireless mesh node in a dead zone

    The extra point still needs a usable connection to the main unit. Under load, the speed and response time of a wirelessly connected satellite can drop; Tweakers reported this in a test of the Deco X50.

    Try different positions and connect the point via Ethernet if you can.

  • Treating different pack options as the same product

    A two-node set doesn’t contain the same number of units as a three-node set. Ports and features can also vary between versions.

    Check the full model name, number of units, ports and features of the exact version you’re considering.

  • Assuming provider-supplied points work on every network

    KPN states that rented SuperWifi points can only be used on a KPN network.

    Check with your provider that the points you choose will work with your connection and subscription terms.

Brands to compare

TP-Link

The Deco X50 range is worth considering if you’re comparing Wi-Fi 6 mesh sets with two or three nodes and optional Ethernet backhaul.

  • TP-Link lists three gigabit ports on each Deco X50 unit.
  • The advertised coverage doesn’t guarantee reception on a particular upper floor. In a Tweakers test of the Deco X50, a wirelessly connected satellite lost speed and response time under load.

ASUS

The ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh option to compare if you’re looking for access point mode or 2.5G ports.

  • ASUS specifies two 2.5G WAN/LAN ports and access point mode for the BD4.
  • The listed bands are 2.4 and 5 GHz. Check the pack option and how many ports will be free in your setup.

FRITZ!

According to the manufacturer, the FRITZ!Mesh Wi-Fi Set 1700 can connect to an existing router or fibre modem. The FRITZ!Box 4060 is a standalone router.

  • FRITZ! lists automatic updates for the Mesh Set 1700.
  • A standalone FRITZ!Box 4060 isn’t automatically a set with an extra transmission point for upstairs. For the mesh set, check the pack size and connection method.

KPN

SuperWifi is worth considering if you want to extend an existing KPN Wi-Fi setup.

  • KPN offers installation help and management through MijnKPN.
  • KPN says rented SuperWifi points won’t work on another provider’s network; this condition applies to those rented points.

NETGEAR

The Orbi 770 RBE772 is a tri-band Wi-Fi 7 mesh option to compare if you’re considering a wireless mesh setup and 2.5G ports.

  • NETGEAR lists tri-band support and an option for wired backhaul via 2.5G.
  • NETGEAR’s advertised Wi-Fi speed and coverage don’t predict how the signal will travel through a floor in a particular home.

Joybuy products to extend Wi-Fi upstairs

These mesh sets are designed to provide Wi-Fi in several areas of your home; some versions also offer ports for wired devices or backhaul. For each version, check the pack size, ports and the CE marking required for the specific device, as advised by the Dutch Authority for Digital Infrastructure.

TP-Link Deco BE68 Wi-Fi 7 mesh set, 2-pack

TP-Link Deco BE68 Wi-Fi 7 mesh set (2-pack)

A good fit if you want to combine several Wi-Fi locations with wired connections for your devices.

Tri-band; 10G, 2.5G and 1G ports per unit.

Check the CE marking required for the specific version.

View at Joybuy
ASUS ZenWiFi BT8 tri-band Wi-Fi 7 mesh set, 2-pack

ASUS ZenWiFi BT8 Tri-Band Wi-Fi 7 (2-pack)

A good fit if you’re comparing a multi-band mesh set with Ethernet ports for wired devices.

Tri-band; 1 Gbps and 2.5 Gbps Ethernet ports.

Check the CE marking required for the specific version.

View at Joybuy
ASUS ZenWiFi BD4 dual-band Wi-Fi 7

ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7

A good fit if you’re comparing mesh expansion with the option of wired backhaul and wired devices.

Dual-band; two 2.5 Gbps Ethernet ports.

Check the CE marking required for the specific version.

View at Joybuy
TP-Link AX1800 Wi-Fi 6 mesh set, 2-pack

TP-Link AX1800 Wi-Fi 6 mesh set (2-pack)

A good fit if you want to use two Wi-Fi locations and are considering a wired connection between mesh nodes.

Wi-Fi 6; Ethernet backhaul listed as an option.

Check the CE marking required for the specific version.

View at Joybuy
TP-Link Deco X50 Wi-Fi 6 mesh set, 3-pack

TP-Link Deco X50 Wi-Fi 6 mesh set (3-pack)

A good fit if you need three mesh nodes and want to connect wired devices to them.

Three gigabit Ethernet ports per unit; 160 MHz bandwidth.

Check the CE marking required for the specific version.

View at Joybuy

Frequently asked questions

Do I need to replace my provider’s modem to get better Wi-Fi upstairs?

Not always: a compatible access point or mesh node can connect to an existing router. According to the manufacturer, the FRITZ!Mesh Set 1700 can connect to an existing router or fibre modem. ACM ConsuWijzer confirms that you can choose your own router in the Netherlands; check which settings are needed for your connection.

Where should I place a wireless mesh node for the gaming room?

Don’t automatically put it in the spot with the weakest signal: the node itself needs to maintain a good connection to the main unit. Test different locations and, if possible, compare the results with a wired connection.

What internet speed do I need for several streaming screens?

It depends on the streaming service, picture quality and number of simultaneous streams. Netflix recommends a stable connection of 15 Mbps or more for one 4K UHD stream; this isn’t a universal requirement for all services. Test the connection at each screen while your other devices are in use.

What should I look for in a mesh set with two or three nodes?

Check how many units are included in the specific pack option and where you can place them. A two-node set doesn’t offer the same number of transmission points as a three-node set. Also check the ports and whether you can connect the nodes by cable.

What should I check about the CE marking?

Before buying, check the CE marking required for the specific version. The Dutch Authority for Digital Infrastructure sets out the applicable requirements for radio equipment; a brand or model name alone doesn’t confirm that every individual item on offer carries the marking.