Upstairs gamer
You mainly want a reliable connection where you play, and can check whether it’s possible to run a network cable upstairs.
First, test your internet connection using a computer connected by cable, then check the Wi-Fi on both floors. If you can run a cable upstairs, a wired access point or mesh system with Ethernet backhaul could be a good fit. Without a cable, your choice will depend mainly on where you place the units and the wireless connection between them. Also check the connection type, the ports you need and the CE marking on the specific model.
You mainly want a reliable connection where you play, and can check whether it’s possible to run a network cable upstairs.
You want your workspace to stay connected while devices are also in use upstairs. Test the connection in both places before choosing extra equipment.
You want Wi-Fi across two floors without running a cable. Pay attention to where you place the Wi-Fi points and the wireless connection between them. Walls and ceilings can affect the signal, according to the Consumers’ Association.
Choose this option: if a wired test shows no problem with your internet connection and moving the router would provide enough coverage.
Bear in mind: walls and floors can limit the coverage of a single Wi-Fi transmitter.
Choose this option: if you can run a network cable upstairs and want to add Wi-Fi there.
Bear in mind: you’ll need a cable and suitable connections. An access point doesn’t automatically replace your modem-router.
Choose this option: if running a cable isn’t practical and a single router doesn’t provide enough coverage upstairs.
Bear in mind: the connection between the points depends on where you place them. With some dual-band kits, devices and backhaul share the wireless capacity.
| What to consider | What should you check? | Who should consider this? |
|---|---|---|
| Coverage between floors | Test downstairs and upstairs. See if you can run a cable, and where an extra point can still get a connection. | If I need coverage upstairs, I want to know how the floor and router position affect the signal first. Around 36% of consumers say coverage is their top priority when buying. |
| Connection while gaming | Check whether you can connect your PC or console by cable and how the Wi-Fi points connect to each other. | For gaming upstairs, I want to check whether the connection to the main network is suitable, rather than looking only at the advertised Wi-Fi speed. Around 29% of consumers give their gaming connection top priority. |
| Using devices at the same time | Test your internet connection using a cable, and check the placement and connections in both areas where you’ll use it. | If someone is gaming upstairs while someone else is working downstairs, I want to know whether both areas have a connection. Around 21% of consumers prioritise using devices at the same time. |
| Installation and ongoing costs | Check the power supply and connections you need, as well as which extra features require a subscription. | If you want a straightforward installation and need to factor in recurring costs, compare the equipment you’ll need and the terms and conditions too. Around 14% of consumers prioritise ease of installation and keeping costs under control. |
Distance, floors and obstacles all affect the signal. The connection at a wireless satellite may be different from the one you get close to the main device.
Test the connection where you game and work, and compare the connection between the Wi-Fi points.
Devices connected to the extra point also rely on the connection between that point and the main network.
Check where the extra point can still get a good connection. If you can run a cable, look into Ethernet backhaul.
Ubiquiti describes the UniFi U6+ as an access point with PoE power and an Ethernet uplink. It doesn’t replace your internet router on its own.
First decide whether you’ll keep your existing router and simply add Wi-Fi upstairs.
An access point may also need a compatible PoE power supply and cabling.
The terms for additional security features vary by model and service.
Compare the available features and check the terms for the exact model you’re considering.
Some advanced features may require a subscription.
According to TP-Link, the Deco X50 range offers mesh with optional Ethernet backhaul. The manufacturer says the X50 Pro has two 2.5Gbit/s WAN/LAN ports per unit.
According to ASUS, AiMesh lets you choose between a wired and wireless connection between points on supported models.
NETGEAR describes the Orbi RBK763S as a router with two satellites and a dedicated connection between the router and satellites.
According to FRITZ!, the FRITZ!Box 7690 combines a DSL router with mesh features and can be connected behind a compatible fibre-optic modem.
The UniFi U6+ is an access point that adds Wi-Fi to an existing network using an Ethernet connection.
These Joybuy products are designed to provide Wi-Fi in multiple areas: mesh kits for several rooms and an access point for extending an existing network. Before buying, check the connection type, power supply requirements and CE marking for the specific model.
Image unavailable
This three-unit mesh kit is designed to provide Wi-Fi in multiple areas of your home.
Dual-band Wi-Fi 5 (802.11ac).
Image unavailable
This three-unit mesh kit is designed to provide Wi-Fi in multiple areas. The product description lists optional Ethernet backhaul for a wired connection between points.
Dual-band Wi-Fi 6.
Image unavailable
This two-unit mesh kit is designed to extend Wi-Fi to multiple areas.
Dual-band Wi-Fi 6; installation requires a compatible PoE power supply.
Image unavailable
This three-unit mesh kit is designed to provide Wi-Fi in multiple areas of your home.
Tri-band Wi-Fi 6E (802.11ax).
Image unavailable
An access point for adding Wi-Fi upstairs when you already have a router and an Ethernet connection. It doesn’t replace the router.
PoE support and a gigabit Ethernet port. The product name lists 2976 Mbit/s.
No. First, test your internet connection using a computer connected by cable and check where your existing router is placed. The Consumers’ Association points out that walls, floors and other obstacles can interfere with the Wi-Fi signal. Moving the router or adding another Wi-Fi point may be a better option.
If you can run a network cable, choose a suitable access point or mesh point with Ethernet backhaul, and check the ports and power supply you’ll need. Without a cable, the extra point still needs a reliable wireless connection to the main network. Follow the instructions for your chosen model. For the general AiMesh setup, ASUS recommends connecting the relevant points by cable before enabling Ethernet Backhaul Mode.
According to ACM ConsuWijzer, you’re free to choose your own router, but your modem must also be compatible with your connection type. For example, a PTP modem isn’t suitable for a PON fibre-optic connection. Ask your provider about the connection type and the settings you’ll need.
The Dutch Authority for Digital Infrastructure says equipment that meets the applicable requirements must carry the correct CE marking. So check the marking on the specific model you’re buying.
No, it depends on the model and feature. Tweakers says some advanced security and parental control features on the TP-Link Deco X50 three-pack it tested require a subscription. NETGEAR says one year of Armor is included with the RBK763S. Check the terms for the specific model you’re considering.