If you can run a network cable upstairs, you can use it to connect your gaming PC or console, and potentially to connect an access point or mesh node. Without a cable, wireless mesh can work if the nodes maintain a usable signal between them; powerline is another option to try in your home. A stated Wi-Fi speed or coverage area doesn’t prove that the connection will work well on your floor.
Who is this relevant for?
Gamer who can run a cable
Wants to game upstairs and may be able to run a network cable. A cable to the gaming PC or console can be separate from the connection between network nodes. NETGEAR Support and TP-Link Netherlands describe ethernet backhaul and network connections for network nodes.
Gamer without a cable route
Wants to connect multiple floors wirelessly and can position mesh nodes where they still have a usable connection to each other. The Consumers’ Association recommends keeping obstacles between Wi-Fi nodes to a minimum.
Resident with Wi-Fi that struggles to reach upstairs
Can’t run a cable upstairs and wants to know whether a network connection through the home’s electrical wiring will work. devolo offers powerline as an option, but also describes possible interference issues with certain VDSL connections.
Buying considerations
First, work out whether cabling is possible. Then choose between a wired network node, wireless mesh or powerline, based on the positioning and connections your gaming setup requires.
Network cable upstairs
Choose this if: you can run a cable and want to connect your gaming PC, console or network nodes by wire.
Trade-off: installation takes work; also check that the node you choose has the connections and operating mode you need.
Wireless mesh
Choose this if: you can’t run a cable but have suitable places where the mesh nodes can maintain a connection to each other.
Trade-off: obstacles and positioning still matter; a mesh node upstairs also needs a usable connection of its own.
Powerline with Wi-Fi
Consider this if: cabling isn’t practical and you want to try using your existing electrical wiring for the connection.
Trade-off: check how it works in your home; devolo describes possible interference with certain VDSL connections.
| Buying consideration |
What to check |
Who is this important for? |
| Reliable connection for your gaming setup |
Check whether you can run a cable upstairs, whether your gaming device has ethernet and how many ports will be available on a network node. |
If I want to game upstairs and make the connection as independent as possible from a wireless link, I’ll look at cabling and ports first. Around 36% of consumers put a reliable connection for their gaming setup first. |
| Wireless coverage between floors |
Decide where you can place the nodes and test the connection where you’ll be gaming; don’t look only at stated speeds or coverage areas. |
Without a cable route, I want to know whether mesh nodes can maintain a connection to each other in suitable locations. Around 29% of consumers prioritise wireless coverage across multiple floors. |
| Connections and installation |
Compare the number of ports on each node, the network mode you need and any power requirements for the exact model. |
If you want to connect a console and also need to manage the connection to the router, check the ports and power requirements in advance. Around 21% of consumers give suitable connections and installation top priority. |
| Whether alternatives are practical |
First check your existing router and where the modem is located; try powerline in your home before relying on that option. |
If I don’t want to or can’t run a cable, I’ll first compare what’s practical in my home and which equipment I can keep using. Around 14% of consumers prioritise practicality and choosing between alternative options. |
Common pitfalls
-
Choosing based only on Wi-Fi version, theoretical speed or coverage area
The Wi-Fi version alone doesn’t tell you how well the connection will perform through your floors or where you game. The Consumers’ Association highlights differences between mesh systems and tests them on different floors and at different distances.
First, work out the route upstairs and test the connection where you play. Treat stated speeds and coverage areas as product specifications, not a guarantee for your home.
You may find that you need an extra node or a cable after all.
-
Putting a mesh node somewhere it can barely get a signal
An additional node needs to maintain a connection to the network itself to extend the connection further.
The Consumers’ Association recommends keeping obstacles between Wi-Fi nodes to a minimum. Use the system’s placement indicator and try another location if needed.
You may need to try a different location, add another node or use a wired backhaul.
-
Assuming every PoE connection can power a mesh node
For the Deco X50-PoE V2, TP-Link lists support for IEEE 802.3at and 802.3bt, but not IEEE 802.3af.
Check the power standard and power budget of your equipment. TP-Link also lists a DC adapter as a power option; check what’s included and the requirements for the exact version.
If you don’t use the DC adapter, you may need a compatible PoE power supply.
Brands to compare
TP-Link
The Deco X50 is a mesh option with optional ethernet backhaul; the X50-PoE is designed for installation with a compatible PoE power supply.
- TP-Link Netherlands lists three gigabit ports per Deco X50 unit. For the Deco X50-PoE V2, TP-Link lists two 2.5Gbps ports and support for certain PoE standards.
- Stated Wi-Fi speeds and coverage aren’t a measure of gaming performance on an upper floor. For PoE, check the requirements of the exact version.
ASUS
The ZenWiFi XD5 is a mesh option if you have ethernet cabling available to connect the network nodes.
- ASUS Netherlands describes ethernet backhaul as a way to free up Wi-Fi bands for wireless devices.
- This benefit depends on having the necessary cabling; it doesn’t in itself say anything about the performance of other ASUS routers.
NETGEAR
NETGEAR describes Nighthawk Mesh models that support ethernet backhaul.
- According to NETGEAR Support, the router and satellites can communicate over ethernet without using Wi-Fi bandwidth for the connection between them.
- NETGEAR warns that some models have only one suitable ethernet port, so you may need a switch to connect more wired satellites.
devolo
According to devolo, Magic 2 WiFi 6 next combines powerline with Wi-Fi for situations where running a network cable upstairs isn’t practical.
- This option uses electrical wiring to connect rooms.
- Speed and stability claims are made by the manufacturer. devolo also describes possible interference issues with certain VDSL connections; check how it works in your own home.
Products at Joybuy
This selection includes mesh systems for Wi-Fi across multiple floors and a Wi-Fi powerline kit that connects through your electrical wiring.
No image available
TP-Link Deco E4 (3-pack)
A mesh system with three units for anyone looking to extend Wi-Fi across multiple floors and potentially connect a gaming device by wire.
Wi-Fi 5 (802.11ac), dual-band (2.4 GHz/5 GHz) and two ethernet ports per unit; the product description states that the ports support up to 100 Mbit/s.
View at Joybuy
No image available
TP-LINK TL-WPA7517 KIT
A powerline starter kit with Wi-Fi for anyone looking to try connecting upstairs through their existing electrical wiring.
The product information states a maximum data transfer rate of 1000 Mbit/s; this isn’t a measured performance figure for your home.
View at Joybuy
No image available
TP-Link Deco X50 (3-pack)
A mesh system with three units for anyone looking to spread Wi-Fi across multiple areas of the home and potentially use ethernet backhaul.
Wi-Fi 6 (802.11ax) and three gigabit ports per unit, according to the product information.
View at Joybuy
No image available
TP-Link Deco XE75 Pro (3-pack)
A mesh system with three units for anyone looking to spread network nodes around their home and connect wired devices too.
Tri-band Wi-Fi 6E (2.4 GHz/5 GHz/6 GHz); each unit has two gigabit ports and one 2.5Gbps port, according to the product information.
View at Joybuy
No image available
TP-Link Deco X50-PoE (3-pack)
A mesh system with three units for anyone looking to position network nodes around their home and check the installation’s power options in advance.
Wi-Fi 6 (802.11ax), two ethernet ports per unit and PoE as a power option, according to the product information; a DC input is also listed. Check which power supply is suitable for your version.
View at Joybuy
Frequently asked questions
Do I need to replace my provider’s router to get better Wi-Fi upstairs?
No, not necessarily. First, check whether you can connect an additional system to your existing router as an access point. The ACM explains that you can usually choose your own modem or router, but not always, so check how your connection is set up before replacing your equipment.
Where should I place a wireless mesh node?
Don’t automatically put the mesh node where the signal is already weakest: the node itself needs to stay connected to the network. The Consumers’ Association recommends keeping obstacles between Wi-Fi nodes to a minimum and suggests using the app or an indicator light to help with positioning.
Do I always need a PoE switch for the TP-Link Deco X50-PoE?
Not necessarily: the product information for the set on offer also lists a DC input. If you want to power the network node through the ethernet cable, check the PoE standard required for the exact version. For the Deco X50-PoE V2, TP-Link lists IEEE 802.3at and 802.3bt, but not IEEE 802.3af.