Who might need to make this choice?

Designer working on a remote floor

You want to upload files from a spot where ceilings or distance may weaken your existing Wi-Fi. The Consumers’ Association recommends comparing a wired connection at the router with one at your workspace.

Resident with weak Wi-Fi across several floors

You may need more than one extra access point and want to consider using several Wi-Fi points or a wired connection between them.

Resident without a practical cable route

You want to connect a workspace on another floor without installing a new network cable, and need to work out whether a wireless link or powerline will work there.

What should you look for when buying?

First compare your upload speed over a cable with the speed at your workspace. Then decide whether coverage, compatibility or the overall set-up matters most.

Consideration What should you look for? Who is this important for?
Reliable uploads Measure using an Ethernet cable connected to the router, then test at your workspace. If I upload design files from a remote workspace, I want to know whether Wi-Fi or my internet connection is the bottleneck. Around 31% of consumers say upload speed at their workspace is their top priority.
Coverage across several floors Consider how many Wi-Fi points you need and whether you can position them where they can still connect reliably to one another. If I need Wi-Fi across several floors, I want to position the points where they can still reach each other. Around 31% of consumers prioritise coverage across multiple floors.
Set-up and compatibility Check compatibility with your router and support for mesh features. For powerline, check how many adapters are included and which ones provide Wi-Fi. If I want to keep using my existing router or can’t run a cable, I want to check in advance that my chosen set-up will work. Around 19% of consumers put set-up and compatibility first.
Total cost and support Compare complete kits with the number of points you need, and check what product support is available. If I want to avoid buying a second extender unnecessarily, I compare what I need for the whole route to my workspace. Around 19% of consumers put total cost and support first.

Common pitfalls

  • Focusing only on the advertised Wi-Fi speed

    An advertised combined Wi-Fi speed isn’t the same as the upload speed your laptop gets at your workspace. Your internet connection and the placement of the points can also limit uploads.

    The Consumers’ Association recommends first comparing a wired measurement at the router with one at your workspace.

  • Placing a repeater where the signal it receives is already weak

    An extra Wi-Fi point needs a usable connection to the router or the previous point. Floors and distance can weaken that connection.

    Test the spot where you want to install the point, and see whether a different position or a wired connection would work better.

  • Mistaking a powerline expansion adapter for a complete kit

    A standalone expansion adapter isn’t the same as a starter kit containing the adapters needed to set up the connection.

    Before buying, check how many adapters are included and which ones provide Wi-Fi. Then test the connection using the sockets you plan to use.

Relevant brands to consider

TP-Link

The Deco X50 is a Wi-Fi 6 mesh range that includes a three-pack, designed to provide Wi-Fi coverage in several areas.

  • TP-Link’s Deco X50 specifications state that each unit has three gigabit ports. Deco units can connect wirelessly or via Ethernet.
  • The advertised combined radio speed and range are manufacturer specifications, not a measurement of upload performance in a three-storey home.

FRITZ!

The FRITZ!Repeater 3000 AX is a standalone Wi-Fi 6 repeater that extends an existing router’s coverage.

  • According to FRITZ!, the model has three frequency bands, two gigabit LAN ports and the option to connect to the router via LAN.
  • FRITZ! describes integrated mesh functionality with a FRITZ!Box. Check which mesh features work with another router; the specifications aren’t an independent performance test.

devolo

The Magic 2 WiFi 6 next range combines Wi-Fi with powerline. According to devolo, the Multiroom Kit includes three adapters for use across several floors.

  • The manufacturer says the adapters connect via your electrical wiring, and that the Wi-Fi adapter has two gigabit ports.
  • The product specifications can’t tell you what upload speed your home’s electrical wiring will deliver. Test the connection using the sockets you plan to use.

Joybuy products for these situations

This selection includes products for powerline Wi-Fi, a single wireless repeater, mesh coverage across several areas and a wired access point.

TP-LINK TL-WPA7517 KIT powerline starter kit

TP-LINK TL-WPA7517 KIT Powerline Starter Kit

A powerline Wi-Fi kit that uses your existing electrical wiring when running a network cable isn’t practical.

The product description states a data transfer rate of up to 1000 Mbit/s; this doesn’t guarantee upload speeds at your workspace.

Joybuy
TP-Link TL-WA850RE 300 Mbps universal Wi-Fi repeater

TP-Link TL-WA850RE 300 Mbps Universal

A repeater that extends your existing Wi-Fi network to one area with a weak signal, provided the repeater itself can still receive a usable signal from the router there.

The description states 2.4 GHz and up to 300 Mbps; this doesn’t guarantee upload speeds at your workspace.

Joybuy
TP-Link Deco M4 mesh kit with three units, dual-band and Wi-Fi 5

TP-Link Deco M4 (3-Pack) Dual-Band Wi-Fi 5

A mesh kit with three stations that work together to provide Wi-Fi coverage in several areas of your home.

The product information states that it offers dual-band Wi-Fi 5 and roaming between Deco units.

Joybuy
TP-Link Deco X50 mesh kit with three units and Wi-Fi 6

TP-Link Deco X50 (3-Pack) Wi-Fi 6

A mesh kit with three nodes for creating several Wi-Fi points. The product description mentions optional Ethernet backhaul if you have a network cable between the points.

According to the product description, each unit has three gigabit Ethernet ports. An advertised Wi-Fi specification doesn’t guarantee a particular upload speed at your workspace.

Joybuy
TP-Link TL-WA801N wireless access point with Passive PoE

TP-Link TL-WA801N Wireless Access Point (N up to 300 Mbps, 2 antennas, WPS, Passive PoE)

A wired access point for a workspace where you have a network cable and need Wi-Fi.

The product name mentions Passive PoE; make sure you have a compatible PoE power supply.

Joybuy

Frequently asked questions

Will a Wi-Fi booster help if a design file uploads slowly even next to the router?

A Wi-Fi booster won’t fix a slow upload speed caused by your internet connection. First, measure your speed using an Ethernet cable connected to the router. If uploads are slow there too, look into your internet connection or broadband plan. The Consumers’ Association recommends using the wired measurement as a point of comparison.

Where should you put a wireless repeater or mesh point?

Position the point where it can still connect to the router or the previous point, then check the connection at your workspace. Walls, ceilings and distance can affect the range. It may also be worth trying a different router position.

When is a cable to the floor where you work useful?

A cable is useful if you can run one to the floor where you work and install an access point there, or if a compatible mesh system lets you connect the points via Ethernet. Check the connections and installation instructions for the devices you choose.

What if the booster breaks after the manufacturer’s warranty has expired?

In the Netherlands, you have the right to a product that works as it should, in addition to any manufacturer’s warranty; there is no fixed statutory warranty period. If there’s a problem, contact the seller, according to the Government of the Netherlands.

Which product regulations apply to Wi-Fi equipment?

Wi-Fi equipment sold in the Dutch market as radio equipment must meet the applicable European requirements and carry the required CE marking. The Dutch Authority for Digital Infrastructure explains these requirements. A statement on a retailer’s website isn’t, by itself, an independent check of an individual product.