First, test your upload speed using an Ethernet cable. If that connection is slow, new Wi-Fi equipment won’t fix the problem. If the Wi-Fi is particularly weak at your workspace, a wired access point or mesh system with Ethernet backhaul is a sensible option if you can run a cable. If not, you could try wireless mesh or powerline, but you’ll need to check that the connection works well enough in your home. The Consumers’ Association recommends testing with a wired connection to assess your internet connection, and advertised Wi-Fi speeds won’t predict upload speeds through the walls in your home.
Who is this relevant to?
Designer working behind thick walls
Works with design files in a spot where obstacles can weaken the Wi-Fi signal, and needs a reliable connection between their workspace and router. The Consumers’ Association covers what to consider when testing a wired connection and positioning Wi-Fi points.
Home worker with an Ethernet cable
Can run a cable to their workspace or an extra Wi-Fi point, and wants to avoid relying on a wireless signal through walls to connect the points. The Consumers’ Association, TP-Link and ASUS describe relevant connection options.
Home worker without a cable route
Can’t run an Ethernet cable to their workspace, so needs to check where wireless points can still connect and whether powerline will work in their home. The Consumers’ Association and devolo cover what to consider with these options.
What should you look for when choosing?
| Factor to consider |
What should you check? |
Who is this important for? |
| Signal through walls |
Check whether you can connect the points with cables and whether a wireless point will still get a signal in the planned location. |
If I upload design files from behind thick walls, I want to know whether the connection will hold up at my workspace. Around 36% of consumers prioritise range and connectivity through walls. |
| Upload speed from your internet connection |
Test the connection with a cable at the router, then compare that result with the Wi-Fi speed at your workspace. |
If upload speeds are disappointing even near the router, I want to know first whether my internet connection is the limiting factor. Around 29% of consumers prioritise finding out what is limiting their upload speed. |
| Working without an Ethernet cable |
Check where a wireless point can still get a signal and whether powerline adapters work in the locations you have in mind. |
If I can’t run an Ethernet cable, I’m looking for a connection that works in my home without one. Around 21% of consumers prioritise finding an option that will work in practice. |
| Equipment and support |
Compare how many points you need, update information and warranty terms; check the CE marking on the specific device. |
If I’m buying extra equipment, I want to know what I need and how to keep using it safely. Around 14% of consumers focus mainly on equipment, security and support. |
Pitfalls to avoid
-
Confusing higher Wi-Fi speeds with faster uploads
Your internet connection and the Wi-Fi link between your router and workspace can have different limitations. A new router won’t fix a slow upload speed from your internet connection.
First, test using a computer connected by Ethernet, then compare the result with the Wi-Fi speed at your workspace.
-
Placing a wireless mesh point where the signal has already dropped out
The extra point must still be able to reach the router or another point. If you place it where reception is weakest, the connection between the points may not be good enough.
Try a spot in between and see whether wired backhaul is an option.
A wireless point in the wrong place could mean extra repositioning, another point or cable installation.
-
Assuming powerline will always deliver the advertised speed
According to devolo, the choice of socket and sources of electrical interference can affect data transfer.
Try the adapters in the locations you have in mind and test the upload speed there.
Brands to consider
TP-Link
The Deco X50 is a mesh option for several rooms, with optional Ethernet backhaul.
- The Dutch product specifications state that each Deco X50 point has three gigabit ports.
- The advertised coverage doesn’t show how it will perform through the internal walls in your home.
ASUS
The ZenWiFi XD5 is a mesh option that can use an existing cable between points as Ethernet backhaul.
- ASUS describes Ethernet backhaul for the XD5 when there are Ethernet ports in the walls.
- The stated Wi-Fi speeds aren’t actual upload speeds; suitable devices and conditions are also important.
FRITZ!
The FRITZ!Repeater 3000 AX is designed to extend an existing router’s coverage, rather than replace it as a modem.
- FRITZ! says the repeater can connect wirelessly or via LAN and has two gigabit LAN ports.
- The integrated mesh management described by FRITZ! is relevant if you have a compatible FRITZ!Box setup.
devolo
The Magic 2 WiFi 6 next Starter Kit uses powerline with Wi-Fi for rooms where running cables or wireless backhaul is difficult.
- The manufacturer specifies a set of two adapters.
- According to devolo, socket choice and sources of electrical interference can affect data transfer.
Joybuy products
These Joybuy picks cover three options: powerline with Wi-Fi, mesh for several rooms, and a wired access point. The right choice depends on factors such as your cabling options and the connection where you need to upload.
No image available
TP-LINK TL-WPA7517 KIT Powerline Starter Kit
A good fit for a powerline setup if you can’t run an Ethernet cable to your workspace and want to try using your home’s electrical wiring for the connection.
The product name describes a powerline adapter starter kit with Wi-Fi.
View at Joybuy
No image available
TP-Link Deco X50 (3-pack) Wi-Fi 6
A good fit for Wi-Fi across several rooms if you can connect the mesh points to each other with cables.
The product name says the set contains three points, and TP-Link says it supports Ethernet backhaul. TP-Link lists three gigabit ports per Deco X50 point; these features don’t predict upload speeds through the walls in your home.
View at Joybuy
No image available
Huawei eKit OptiX FG630 AX3000 Dual-Band Wi-Fi 6 Mesh Router
The product name describes a dual-band mesh router for a home mesh setup. Before buying, check that the points will be able to stay connected in the locations where you plan to work.
The product name specifies dual-band and Wi-Fi 6.
View at Joybuy
No image available
Linksys Velop Pro 7 Tri-Band Wi-Fi 7 (2 nodes)
A good fit for a mesh setup with several points; check that the points can connect from the locations you choose.
The product specifications list two included nodes. The product name specifies tri-band, Wi-Fi 7 and the 2.4 GHz, 5 GHz and 6 GHz bands; this isn’t a measure of upload speeds through walls.
View at Joybuy
No image available
TP-Link EAP725-Wall
A good fit for a wired access point if you can run an Ethernet cable to your workspace and want to add Wi-Fi there.
The product name specifies PoE and 5012 Mbit/s. The described installation requires a PoE power supply; the stated speed isn’t an upload speed measurement.
View at Joybuy
Frequently asked questions
How can I tell whether my router is causing slow uploads?
First, test using a computer connected to your home network with an Ethernet cable, then compare the result with the Wi-Fi speed at your workspace. If the wired speed is repeatedly lower than expected, contact your provider. A new Wi-Fi setup won’t increase the speed of your internet connection.
Where should I put a wireless mesh point?
Put it somewhere it can still connect to the previous point, with as few obstacles between them as possible. The Consumers’ Association recommends placing Wi-Fi points no more than two rooms apart if possible. Then check the signal and upload speed at your own workspace.
Can I use my own router with a Dutch internet connection?
According to ACM ConsuWijzer, consumers in the Netherlands are free to choose their router. Your own modem may need to meet connection and security requirements, so ask your provider for the settings you need and keep the device updated. The freedom to choose your router doesn’t mean every modem will work with every type of connection.
What legal check should I make when buying a Wi-Fi router?
The Dutch Authority for Digital Infrastructure states that Wi-Fi routers must have a CE marking, and that only products with a CE marking may be sold in Europe. Check the marking on the specific device; a product listing isn’t a substitute for checking it.
Does my legal guarantee end after two years?
No. ACM ConsuWijzer explains that your legal guarantee is the right to a product that works for as long as you could reasonably expect it to. If a product breaks too soon during normal use, the seller must provide an appropriate solution. The manufacturer’s warranty period isn’t the same as the length of your legal rights.