Portfolio creator working behind the kitchen
Uploads files in a room where Wi-Fi works less well than it does near the router. The Consumers’ Association recommends a wired measurement to assess your connection.
First, use a network cable to measure your upload speed at the router, then compare it with the Wi-Fi speed at your workspace: a new router won’t fix a limitation with your internet connection. If the wired upload speed is good but the Wi-Fi signal is weak behind the kitchen, first try moving the router to a better position. If coverage is still inadequate, consider a wired access point or mesh system with Ethernet backhaul, if you can run a cable. The Consumers’ Association recommends using a network cable for a speed test.
Uploads files in a room where Wi-Fi works less well than it does near the router. The Consumers’ Association recommends a wired measurement to assess your connection.
Can use a network cable and wants a reliable connection or a Wi-Fi point on the other side of the kitchen. TP-Link and ASUS describe Ethernet backhaul on specific mesh models.
Wants to improve Wi-Fi in several rooms without running a cable between the points. Bright describes mesh connections with and without a cable; with wireless mesh, the position of the points still matters.
First, test the connection using a cable and at your workspace. Then decide whether the cause calls for a better router position, an extra wired point, wireless mesh or a new router.
| Concern | What should you check before buying? | Who is this important to? |
|---|---|---|
| Upload speed at your workspace | Compare a wired upload speed test at the router with Wi-Fi where you work; the Consumers’ Association recommends using a network cable for a speed test. | If I upload from the room behind the kitchen, I want to know whether the Wi-Fi coverage there is good enough; around 42% of consumers give coverage at the upload location their highest priority. |
| Connection between Wi-Fi points | Check whether Ethernet backhaul is an option; TP-Link and ASUS list it for specific mesh models. If you choose wireless mesh, test whether the extra point still has a good connection to the main point in its intended position. | I want an extra Wi-Fi point to stay connected to the network, even on the other side of the kitchen; around 33% of consumers prioritise the connection between Wi-Fi points. |
| Cause of slow uploads | Before choosing equipment, test with a network cable at the router and separately over Wi-Fi at your workspace; the Consumers’ Association recommends testing over a wired connection. | Before I buy a new system, I want to know whether the limitation is already with my internet connection; around 17% of consumers put identifying the cause first. |
| Connection to your provider’s modem | Check which modes your provider supports and whether the system you choose can work as an access point. | I want to keep my provider’s modem and know in advance which settings I’ll need; around 8% of consumers give straightforward connection to existing equipment their highest priority. |
A model’s stated specifications don’t tell you the upload speed at your workspace. Your internet connection, the distance and any obstacles between the router and your laptop can also make a difference.
First, test using a cable at the router, then over Wi-Fi where you upload. Test again after making a change.
Your laptop may have a good connection to a nearby point, while that point itself has a weak connection to the main point.
Try different positions for the extra point. If you can run a cable, check whether Ethernet backhaul is suitable for the system you’ve chosen.
Depending on the location, you may still need to move the extra point or run a network cable.
The right way to connect it depends on the role of your provider’s modem and the capabilities of the new system.
Before buying, check whether the modem will remain your router or supports a bridge mode, and whether your chosen system can work in access point mode.
The Deco X50 is an example of a mesh range with multiple Wi-Fi points.
The ZenWiFi AX (XT8) is an example of tri-band mesh with a configurable connection between points.
According to FRITZ!, the FRITZ!Mesh Set 4200 is designed to add Wi-Fi to existing router or modem equipment.
This selection of Joybuy products includes both standalone routers and mesh systems. Consider their features once you’ve established whether the limitation is with your internet upload speed or the Wi-Fi at your workspace.
No image available
A mesh option for anyone who can use a wired connection between Wi-Fi points.
The product name lists Wi-Fi 7 (802.11be), dual-band and two internal components.
Wired backhaul requires a network cable between the points.
No image available
A router option if you want to replace your existing router and are looking for a system with AiMesh compatibility.
The product name lists Gigabit Ethernet and dual-band (2.4 GHz / 5 GHz).
No image available
A mesh option for several rooms if you can connect the Deco points with a cable.
TP-Link lists Wi-Fi 6 (802.11ax), 2.4 and 5 GHz bands, and three gigabit ports per unit for the Deco X50.
Ethernet backhaul requires a wired connection between the Deco units.
No image available
A mesh router to consider if you’re looking for a system that, according to the product description, can be expanded with multiple units.
The product name lists BE3600, dual-band and Wi-Fi 7.
No image available
A router option if you want to replace your existing router and the listed 4G dongle function is useful to you.
The product name lists BE3600, dual-band, Wi-Fi 7 and a 4G dongle function.
First, use a network cable to test at the router, then test over Wi-Fi where you upload your portfolio. If the wired upload speed is still low, look into your internet connection. If it’s mainly the Wi-Fi at your workspace that’s slow, consider the router’s position or adding another Wi-Fi point. The Consumers’ Association recommends using a network cable for a speed test.
Don’t place it only where your laptop has poor coverage: the point itself also needs to maintain a usable connection to the main point. Test the connection in the intended position; a cable between the points avoids that wireless link.
Yes, but check the settings for your equipment. Your provider’s modem can remain the router while the new equipment works as an access point. Using your own router in bridge mode is only an option if your provider supports that mode. FRITZ! describes how to install the Mesh Set 4200 behind an existing router.
Check whether you’ll need a network cable for a wired connection between the points, and whether the equipment you choose is compatible with the mode of your provider’s modem. The Dutch government states that the Netherlands has no fixed statutory guarantee period; if a product is faulty, contact the seller.