Family with two study areas
Needs a connection in both the study nook and the more distant study room, with both being used at the same time. It’s important to consider the distance and obstacles between the router and each area.
Don’t rush out to buy a more powerful router. First, test your connection using Ethernet and check it in both study areas, as distance and obstacles can weaken Wi-Fi, according to the Dutch Consumers’ Association. If you have a suitable network cable, an access point or mesh node with Ethernet backhaul is a sensible option. Without a cable, your choice depends on whether there’s a suitable spot for wireless mesh or whether powerline is worth testing in your home.
Needs a connection in both the study nook and the more distant study room, with both being used at the same time. It’s important to consider the distance and obstacles between the router and each area.
Can connect the study room to an access point or mesh node with a cable. A wired connection between Wi-Fi points can replace the wireless link between them.
Needs to assess whether there’s a midway spot where a wireless mesh node can still get a signal, or whether powerline through the mains is worth testing.
First, test your connection. Then decide how an additional Wi-Fi point can connect to the rest of your network.
Choose this when: the router is behind obstacles or you’re not yet sure where the slowdown is occurring.
Bear in mind: moving it may require a longer cable, and it won’t make a slow broadband connection any faster.
Choose this when: there’s a suitable network cable to the study room and you need Wi-Fi there.
Bear in mind: installing a cable takes work; the cable between Wi-Fi points doesn’t replace the wireless connection to your laptop.
Choose this when: cables aren’t practical and there’s a midway spot where the mesh node can still receive a usable signal.
Bear in mind: if you place a node where the original signal has already dropped out, it may not have a good connection back to the network.
Choose this when: there’s no network cable and there’s no suitable midway spot for a wireless mesh node.
Bear in mind: the connection runs through your home’s electrical wiring, so you’ll need to test it in your own home.
| What to consider | What should you check? | Which consumers should consider this? |
|---|---|---|
| Coverage in both areas | Test the connection in both the study nook and the distant study room; consider walls and the router’s position. | If I want to study in both areas at the same time, I need to know whether the connection is usable in each. Around 33% of consumers prioritise coverage in both areas. |
| Connection between the points | Check whether Ethernet is available. If not, find out whether there’s a suitable midway spot for mesh or suitable sockets for testing powerline. | I want to know how the signal reaches the distant room, especially if I can’t run a cable. Around 33% of consumers prioritise the connection route between the points. |
| Working with your router | Check the operating mode you want and which features remain available; establish which device assigns IP addresses. | If I want to keep my broadband provider’s router, I need to know whether the extra equipment will work with it and retain the features I need. Around 25% of consumers prioritise keeping their existing network. |
| What’s included and ongoing maintenance | Check how many points are supplied, which cables and power supplies are needed, and how the device receives updates. | I want to know in advance how many points I’ll need and how to update the devices afterwards. Around 9% of consumers prioritise what’s included and how it’s managed. |
Distance and obstacles can weaken Wi-Fi, but your broadband connection could also be the limiting factor. A new router in the same poorly chosen spot won’t automatically solve the problem.
Test the connection using Ethernet and in both study areas. If needed, first try moving your existing router to a better spot.
The extra node needs its own connection to the rest of the network. Devolo describes powerline as an alternative that uses your home’s electrical wiring, but how well it works depends on your home.
Try a midway spot where the mesh node can still receive a signal. If that’s not possible, test powerline using the sockets you plan to use.
According to TP-Link, the existing router assigns IP addresses when Deco is in access point mode. Some features in the Deco app, including parental controls and antivirus, aren’t available in this mode.
Check which features are available for the exact model and configuration you want.
The name of a set doesn’t, by itself, confirm what’s included, and a stated radio speed doesn’t show how Wi-Fi will perform through the walls of your home.
Confirm what’s included with the retailer, then test the connection in both study areas after installation.
If the set contains fewer points than your setup needs, you may need an extra Wi-Fi point.
The Deco X50 is a Wi-Fi 6 mesh range where Ethernet ports and the choice between router and access point modes are key considerations.
The ZenWiFi XD5 is a Wi-Fi 6 mesh system that can make use of existing Ethernet cabling.
The FRITZ!Repeater 3000 AX is a standalone extension point for anyone who wants to keep their existing router.
Magic powerline with Wi-Fi is an option when a room is difficult to reach with Ethernet or a well-positioned wireless mesh node.
These Joybuy picks are mesh sets designed to provide Wi-Fi in several areas. They’re suitable for extending coverage to a distant study room if the points can maintain a usable connection to your home network. Be sure to test the connection in both study areas after installation.
No image available
This mesh set includes two units and is designed to provide Wi-Fi in several areas of your home.
No image available
A mesh set for Wi-Fi in several areas; the product name specifies three units. The title mentions Wi-Fi 6 (802.11ax).
No image available
This mesh set includes two units and is designed to provide Wi-Fi in several areas. The product title mentions PoE, Wi-Fi 6 (802.11ax) and dual-band (2.4 GHz / 5 GHz).
No image available
A mesh option for Wi-Fi in several areas. The product title mentions tri-band (2.4 GHz / 5 GHz / 6 GHz) and Wi-Fi 6E (802.11ax).
No image available
A mesh set with two units for Wi-Fi in several areas. The product title mentions Wi-Fi 6 (802.11ax) and dual-band (2.4 GHz / 5 GHz).
Not until you’ve found out where the slowdown is. Compare a wired test with tests in both study areas. A good wired connection but weak Wi-Fi in the study room points to a problem inside your home rather than a broadband package that’s too slow, according to the Dutch Consumers’ Association.
Yes. TP-Link describes access point mode for using Deco behind an existing router. The existing router then assigns IP addresses; according to TP-Link, some features in the Deco app, including parental controls and antivirus, aren’t available in this mode. Check the capabilities of the exact version.
Check that your router and extra Wi-Fi points receive updates, and install them. Safe Internetting recommends enabling automatic updates if possible and changing the default login details.
You’re entitled to a product that works for as long as you can reasonably expect it to. ACM ConsuWijzer explains that the legal guarantee doesn’t simply mean one fixed period for every router; any manufacturer’s warranty is separate.
Router freedom applies in the Netherlands, as ACM ConsuWijzer explains, but a provider can refuse a device if it doesn’t meet the applicable safety requirements. If you’re replacing the provider’s router entirely, ask which connection settings you’ll need. Adding an access point is a different approach.