Who is this guide for?

Families with weak Wi-Fi upstairs

You need a connection in the study nook and at a desk on another floor at the same time. In that case, where you place an extra Wi-Fi point may matter more than a router’s advertised top speed. The Consumentenbond notes that distance and obstacles such as ceilings can weaken the signal.

Families with a network cable upstairs

You can connect the upstairs desk by cable and want an extra Wi-Fi access point there, while keeping your existing router. TP-Link also describes an Ethernet connection between mesh units, while Ubiquiti describes the U6+ as an access point with an Ethernet port.

Families who want to keep their ISP router

You want to extend coverage without taking over the settings on your existing router. Check which features remain available in the mode you choose, though. TP-Link states that some Deco app features, including parental controls, are unavailable in access point mode.

What should you look for?

Distance and ceilings can weaken the Wi-Fi signal. Check both workspaces first, then decide whether cabling, an extra mesh point or a different main router best suits your setup.

What to consider What should you check? Who is this important for?
Wi-Fi on both floors Check both locations and see where extra nodes could go. If I need Wi-Fi on two floors at the same time, I want to know whether the connection is good enough at both workspaces. Around 36% of consumers say coverage on both floors is their top buying priority.
Connection upstairs Check whether the cable reaches the workspace and whether the device you choose has an Ethernet port. If there’s a cable upstairs, I want to use it for the desk or an extra Wi-Fi point. Around 29% of consumers prioritise a wired workspace upstairs.
Keeping your existing router Check the operating mode and how the device connects to your current router. If I want to keep using my ISP router, I want to extend my network without making unnecessary changes to its functions. Around 21% of consumers prioritise keeping their existing router.
Family features and costs Check that the features you want are available in the mode you choose, and whether any paid services are needed. If parental controls and long-term costs will shape my decision, I want to know in advance which features will be available in my setup. Around 14% of consumers weigh up family controls and costs first.

Common buying mistakes

  • Buying a faster router without checking the signal upstairs first

    Distance and ceilings can limit the signal, even when a router advertises a high maximum speed.

    First, check the signal in the study nook and at the desk upstairs. Then consider whether moving your router, adding mesh or installing a wired access point would suit the places where you need Wi-Fi.

  • Assuming parental controls work in every mesh mode

    TP-Link says some Deco app features, including parental controls, are unavailable in access point mode.

    Check that the features you want are available in the operating mode you plan to use.

  • Treating an access point as a complete router

    The Ubiquiti UniFi U6+ is an access point and won’t automatically take over the main router’s role. You’ll also need to consider power and management.

    Before buying, check your existing router, the cable route, the power supply required and how the device will be managed.

Brands to compare

TP-Link

The Deco X50 range offers mesh coverage across multiple floors, with different pack sizes and optional Ethernet backhaul.

  • TP-Link lists three gigabit ports on each Deco X50 node.
  • TP-Link says some advanced Deco app features, including parental controls, are unavailable in access point mode. The advertised coverage isn’t a measurement of your home.

ASUS

ZenWiFi BD4 is a dual-band mesh system with Wi-Fi 7. Compare the connections and model variant to find one that suits your setup.

  • ASUS lists two 2.5-gigabit ports and family features for the BD4.
  • These model specifications don’t tell you how much coverage you’ll get through a ceiling in your home. Check the pack size and model variant too.

FRITZ!

The FRITZ!Box 4050 is a standalone router. FRITZ!Repeaters are one way to extend a compatible FRITZ! home network.

  • FRITZ! lists gigabit WAN, Wi-Fi 6 and mesh support for the 4050.
  • A standalone router won’t necessarily solve a poor signal upstairs. If you’re replacing your router, check the connection and any settings your ISP requires.

Ubiquiti

The UniFi U6+ is an access point for a setup with a network cable upstairs, not a standalone replacement for your main router.

  • Ubiquiti lists one gigabit Ethernet port and management via UniFi Network.
  • Check that the PoE power supply required and this management approach suit your family and network.

NETGEAR

Orbi offers mesh systems as an option for a wireless connection between floors.

  • NETGEAR describes a dedicated 5GHz connection between the router and satellites on certain tri-band Orbi systems.
  • This description doesn’t automatically apply to every Orbi model, and it doesn’t tell you what coverage you’ll get in your home.

Joybuy products

These products are mesh systems for getting Wi-Fi in multiple areas of your home. Check whether the model is designed to work alongside your existing router or can also replace your main router. For radio equipment intended for the Dutch market, also check that the specific model carries the CE mark.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 (2-pack)

A mesh option for anyone who needs Wi-Fi in multiple areas of the home and wants to keep their existing router.

TP-Link says certain app features, including parental controls, are unavailable when Deco is in access point mode.

Joybuy
TP-Link Deco E4 mesh system, 3-pack, dual-band Wi-Fi 5

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5 (2,4 GHz / 5 GHz)

A mesh option for anyone who wants to place several Wi-Fi points around the home.

This model uses Wi-Fi 5 (802.11ac). According to the product specifications, its Ethernet ports support a maximum of 100 Mbit/s per device. Check that this suits your wired connection.

TP-Link says some app features, including parental controls, are unavailable when Deco is in access point mode.

Joybuy
ASUS ZenWiFi BT8 mesh system, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7 (2,4 GHz / 5 GHz / 6 GHz)

A mesh option for Wi-Fi in multiple areas. Decide whether you want to keep or replace your main router before choosing how to connect the system.

This model uses Wi-Fi 7 (802.11be).

Joybuy
ASUS ZenWiFi BD4 dual-band mesh system with Wi-Fi 7

ASUS ZenWiFi BD4, dual-band Wi-Fi 7 (2,4 GHz / 5 GHz)

A mesh option for Wi-Fi in multiple areas. The product information lists wired backhaul as an option; check whether you can run a cable between the units in your home.

This model uses Wi-Fi 7 (802.11be).

Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System (2-pack)

A mesh option for Wi-Fi in multiple areas. The product information lists Ethernet backhaul as an option if you have a cable between the units.

This model uses Wi-Fi 6.

Joybuy

Frequently asked questions

Do I need to remove my ISP router to install mesh?

No. According to TP-Link, a Deco system can work alongside your existing router. In access point mode, that router continues to manage network functions, but check which mesh system features are available in this mode.

Where should I place an extra Wi-Fi point?

First, check the signal at both workspaces. Distance and obstacles such as walls and ceilings can weaken it, so a wireless extra node still needs a usable connection of its own. If you can run a cable upstairs, compare wired backhaul and an access point too.

Can I use my own router in the Netherlands?

Yes. ACM ConsuWijzer explains that you’re free to choose your router. However, devices connected directly to your ISP’s network must meet the applicable safety and connection requirements. Ask your provider which settings you need.

Do I need a licence to use Wi-Fi at home?

According to the Dutch Digital Infrastructure Inspectorate, you don’t need a licence for normal home use as long as you follow the conditions for the designated frequencies.