Who is this advice for?

Reader behind thick walls

You download magazines in a spot where walls may weaken the Wi-Fi signal. First, check whether the connection is the problem there before considering a faster broadband package.

Reader who can’t run a cable

You can’t run an Ethernet cable to your reading spot and want to know whether a wireless repeater or a powerline connection might work there.

User with an existing router from their provider

You want to keep your current router and connect an additional node. Check that the connections and operating mode of the system you choose are compatible with your network.

What should you consider when choosing?

First, compare a test over Ethernet at the router with Wi-Fi where you read. Then, based on your placement options, choose between a better router position, an extra Wi-Fi node or a different way to connect the nodes.

What to consider What should you check? Who is this important for?
Coverage where you read Test over Ethernet at the router and over Wi-Fi where you read. Then see whether moving the router helps. If I download magazines behind a thick wall, I want to know whether the Wi-Fi is the problem there before replacing any equipment. Around 36% of consumers prioritise reliable coverage where they read.
No network cable Find a spot in between with a usable Wi-Fi signal. If you’re considering powerline, check that the sockets you plan to use work for your setup. If I can’t run Ethernet to where I read, an extra node still needs to be able to connect there, or the home’s electrical wiring needs to carry the connection. Around 29% of consumers prioritise a solution that doesn’t need a network cable.
Connection to your existing router Check the Ethernet ports, access point mode and connection instructions for the exact model. If I want to keep my router from my provider, I want to avoid buying an extra system that won’t connect to my existing network. Around 21% of consumers focus on compatibility.
Total cost and support Work out which nodes, adapters and cables your chosen setup needs. Also check the product support available. I don’t want to buy more equipment than I need to download magazines where I read. Around 14% of consumers prioritise total cost.

Common buying mistakes

  • Assuming a faster router means better coverage

    Walls can interfere with the Wi-Fi signal, so a higher advertised speed doesn’t tell you how well the connection will work where you read.

    Test the connection over Ethernet at the router and over Wi-Fi where you read. Then assess the router’s position and the connection to any extra node.

  • Putting a wireless repeater where the signal is weakest

    A wireless node needs a usable connection to the existing network itself. Placing it somewhere the signal has almost disappeared won’t fix the problem by itself.

    Try a spot in between, with fewer obstacles and a usable signal. If that doesn’t work, see whether you can use a wired connection.

  • Judging powerline by its advertised speed

    Powerline uses your home’s electrical wiring to connect the nodes. An advertised product speed doesn’t tell you how well the sockets in your home will work.

    Check which adapters are included in the set and test the connection using the sockets you actually plan to use.

  • Assuming a product listing confirms the CE marking

    A product listing alone doesn’t confirm whether the exact model carries the required marking.

    Before choosing a specific device, check the CE marking on the exact model. The Dutch Authority for Digital Infrastructure states that the CE marking must appear on the equipment.

Brands to consider

TP-Link

TP-Link describes the Deco X50 as a mesh system with optional Ethernet backhaul, and the Deco PX50 as combining Wi-Fi with a connection over your home’s electrical wiring.

  • The models described offer different ways to connect mesh nodes to each other.
  • The stated coverage or speed doesn’t tell you how the system will perform behind the walls in your home. Check the set contents and connection method.

ASUS

ASUS says the ZenWiFi XD5 supports Ethernet backhaul when Ethernet ports are available.

  • A wired connection between nodes is an option if you can use network ports for this purpose.
  • This requires usable Ethernet connections between the nodes. The product specifications aren’t an independent range test.

FRITZ!

FRITZ! describes the FRITZ!Repeater 1200 AX as an extender with a LAN connection for use with a FRITZ!Box.

  • According to FRITZ!, the repeater can adopt settings from a FRITZ!Box through this specific connection.
  • Don’t assume the same mesh integration will work with a router from another brand without checking.

devolo

devolo describes Magic adapters that carry the internet signal to another room over the electrical wiring, with models that provide Wi-Fi in that room.

  • This could be a useful option if running a network cable to the other room isn’t practical.
  • The actual connection depends on the sockets and wiring in your home.

Joybuy products

This selection includes powerline mesh, a wireless repeater, and wired access points or mesh products. Check which connections and modes are available for each model, and which way of connecting the nodes is right for your home.

TP-Link Deco PX10, dual-band Wi-Fi 6

TP-Link Deco PX10, dual-band Wi-Fi 6

According to the product description, this mesh system uses powerline to connect the nodes. Check that the sockets you plan to use are suitable for your setup.

Dual-band: 2.4 GHz and 5 GHz; Wi-Fi 6 (802.11ax); Gigabit Ethernet ports; Router and Access Point modes.

View at Joybuy
ASUS ZenWiFi BD4, dual-band Wi-Fi 7

ASUS ZenWiFi BD4, dual-band Wi-Fi 7

The product description mentions mesh and an option for wired backhaul. Check whether you can connect the nodes using Ethernet.

Dual-band: 2.4 GHz and 5 GHz; Wi-Fi 7 (802.11be).

View at Joybuy
Wi-Fi Repeater Pro, black

Wi-Fi Repeater Pro, black

A wireless repeater may be suitable if you can place it somewhere that still has a usable connection to your existing network.

2.4 GHz; two external antennas; stated wireless speed of up to 300 Mbps. Designed to plug into a socket and set up using the Mi app.

View at Joybuy
TP-Link Omada EAP653, Wi-Fi 6 wireless access point

TP-Link Omada EAP653, wireless access point

This access point is designed for a wired network connection, so it’s only suitable if you can run Ethernet to the installation point.

Dual-band Wi-Fi 6; Ethernet and PoE; wall or ceiling mounting listed.

View at Joybuy
TP-Link Deco XE75 Pro, 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro, 3-pack, tri-band Wi-Fi 6E

A mesh set with three units may suit you if you want to place several nodes around your home. Check how the units will connect in your setup.

Tri-band: 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 6E; Ethernet ports on each unit.

View at Joybuy

Frequently asked questions

Should I upgrade to a faster broadband package straight away for quicker magazine downloads?

Not before comparing your connections. Test with a computer connected to the router by Ethernet, then compare it with Wi-Fi where you read. If the Wi-Fi is particularly weak there, first look at the router’s position or local coverage.

Where should I put an extra wireless Wi-Fi node?

Place the node somewhere it can still connect well to your existing network, with as few obstacles as possible between the nodes. The spot with the weakest signal isn’t automatically suitable.

Can I use my own router alongside or instead of the one from my provider?

ACM ConsuWijzer explains your right to choose your router. If you keep your provider’s router and connect an additional system, check that its access point mode and connection method are compatible with your existing network.

How can I keep my Wi-Fi network secure after installation?

Use a strong password for your router or Wi-Fi network. This is the advice from the Dutch Data Protection Authority for securing a router or Wi-Fi network.

What should I check about the CE marking on a Wi-Fi device in the Netherlands?

Check the CE marking on the exact model before choosing a specific device. The Dutch Authority for Digital Infrastructure states that equipment sold in Europe must carry the CE marking.