Who is this choice relevant to?

Workshop participant in the loft

Your main concern is whether the connection reaches the floor where you work. So think about where to place your Wi-Fi points and how they connect to each other, rather than just the advertised top speed.

User with network cables

If you can connect points on different floors with cables, mesh with Ethernet backhaul or a wired access point is worth considering. TP-Link describes Ethernet backhaul as a way to connect Deco points by cable.

User who wants to keep their provider’s modem

You want to improve coverage without replacing your existing modem setup unnecessarily. Check how the new system connects and what conditions apply to any Wi-Fi points supplied by your provider. ACM ConsuWijzer explains your freedom to choose a router; KPN says that rented SuperWifi points only work with KPN Internet.

What should you look for in Wi-Fi for a workshop?

First, test the connection where you’ll be taking the workshop. If it already works well there, look into your existing setup before replacing equipment. If coverage across several floors is the problem, compare wireless mesh with wired points if Ethernet is available.

What to consider What to look for when buying Who is this important for?
Coverage on the workshop floor Check the number of points, whether the system can be expanded and the connection at your workspace. Don’t treat stated coverage areas as a guarantee for your home. If you work in the loft, you’ll want to know whether the signal is usable there and whether each point stays connected to the network. Around 36% of consumers put coverage on the workshop floor first.
A stable connection during the workshop Test the connection at your workspace and check whether Ethernet backhaul or a wired connection to your computer is possible. If live audio and screen sharing matter, you’ll want to minimise interruptions during the workshop. Around 29% of consumers prioritise connection stability.
Connecting to your provider’s modem Check which router or access point mode you need, how many Ethernet ports are available and whether any conditions apply to provider-supplied points. If you want to keep your existing modem, you’ll want to connect your equipment without replacing the whole setup unnecessarily. Around 21% of consumers give easy set-up top priority.
Kit size, updates and support Check how many points are included in the box, whether you need cables or extra points, and how updates and the warranty are handled. If you want to keep the purchase and maintenance manageable, it’s important to know what the setup requires and what support is included. Around 14% of consumers prioritise cost and maintenance.

Avoid common buying mistakes

  • Assuming a large stated coverage area guarantees coverage in the loft

    Your layout, floors and the placement of the points all affect whether the connection is usable where you’ll be taking your workshop. A stated coverage area doesn’t predict this directly.

    Plan the points around your actual workspace and test the connection there before relying on the kit.

  • Buying only a new router when the problem is coverage between floors

    A different router in one location won’t automatically improve the connection through several floors. Extra points also won’t fix a problem with your internet connection itself.

    Find out where the connection becomes weak, then compare a single router with mesh or wired points.

  • Confusing a two-piece kit with a three-piece version

    The number of units included varies between kit versions, even when the product names refer to the same model series.

    Check the full product name and what’s included in the box before ordering.

  • Choosing provider-supplied points or an extended warranty without checking the terms

    According to KPN, rented KPN SuperWifi points only work with KPN Internet. A commercial warranty does not replace your statutory rights.

    Check the rental or purchase terms. ACM ConsuWijzer explains that the seller is responsible for the statutory guarantee if a product is faulty.

Brands to compare

TP-Link

The Deco X50 is a dual-band Wi-Fi 6 mesh series available in kits of different sizes, making it worth considering if you want to build coverage across several floors.

  • According to TP-Link, each Deco X50 has three gigabit ports and supports optional Ethernet backhaul.
  • Stated speeds and coverage are manufacturer specifications, not measured results in your home. Check how many units are included in the kit you choose.

FRITZ!

The three-piece FRITZ!Mesh Set 1700 is designed to extend an existing home network, including one with a router from another brand.

  • FRITZ! lists three FRITZ!Repeater 1700 units, each with a gigabit LAN port. The manufacturer describes connecting them via LAN to an existing router or fibre ONT.
  • Check which connection setup is right for your broadband connection and network.

ASUS

ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh series to compare with Wi-Fi 6 systems.

  • ASUS lists two 2.5-gigabit ports and wired backhaul options.
  • Wi-Fi 7 or a higher port speed doesn’t guarantee a better video call by itself. Also check how many units are included in the pack you choose.

NETGEAR

According to NETGEAR, the Orbi RBK763S is a tri-band Wi-Fi 6 kit with one router and two satellites.

  • NETGEAR describes a dedicated connection for communication between the router and satellites.
  • Stated capacity and coverage don’t prove what range you’ll get in your home.

KPN

SuperWifi is a provider-supplied option for customers who want to add Wi-Fi points to their existing KPN home network.

  • KPN explains how to install and manage the points on its home network.
  • According to KPN, rented SuperWifi points only work with KPN Internet; this condition applies to the rental option.

Joybuy product picks

These products are mesh options for Wi-Fi across several floors. Compare the number of units and check the connection where you’ll be taking your workshop.

TP-Link Deco M4 (3-Pack), dual-band Wi-Fi 5 mesh system

TP-Link Deco M4 (3-Pack)

This three-unit kit is an option for building a mesh network across several floors. Test whether the connection is usable where you’ll be taking your workshop.

Dual-band (2,4 GHz/5 GHz); Wi-Fi 5 (802.11ac).

View at Joybuy
TP-Link Deco X50 (3-Pack), dual-band Wi-Fi 6 mesh system

TP-Link Deco X50 (3-Pack)

A three-piece mesh kit to consider if you want to build Wi-Fi coverage across several floors. Check the connection between the points in your home.

Dual-band (2,4 GHz/5 GHz); Wi-Fi 6 (802.11ax). TP-Link lists optional Ethernet backhaul for the X50 series; check the connection requirements for the mode you choose.

View at Joybuy
TP-Link Deco XE75 Pro (3-Pack), tri-band Wi-Fi 6E mesh system

TP-Link Deco XE75 Pro (3-Pack)

This three-unit pack is a mesh option for several floors. Placement and the connection where you’ll be taking your workshop are still key.

Tri-band (2,4 GHz/5 GHz/6 GHz); Wi-Fi 6E (802.11ax).

View at Joybuy
TP-Link Deco XE75 (3-pack), tri-band Wi-Fi 6E mesh system

TP-Link Deco XE75 (3-pack)

This three-unit kit is designed as a mesh option for coverage across several floors. Check the range where you’ll be taking your workshop.

Tri-band (2,4 GHz/5 GHz/6 GHz); Wi-Fi 6E (802.11ax).

View at Joybuy
TP-Link Deco X50-PoE (3-Pack), dual-band Wi-Fi 6 mesh system

TP-Link Deco X50-PoE (3-Pack)

A three-piece mesh option to compare if you want to place points across several floors. Check whether your installation is suitable for PoE power.

Dual-band (2,4 GHz/5 GHz); Wi-Fi 6 (802.11ax); two Ethernet ports. PoE power requires a compatible PoE supply and Ethernet cabling.

View at Joybuy

Frequently asked questions

Do I need to replace my provider’s modem to use my own mesh Wi-Fi?

No, not necessarily. ACM ConsuWijzer explains your freedom to choose a router and says that providers must make the necessary connection settings available. Check whether your chosen system can work with your existing modem; TP-Link lists router and access point modes for the Deco X50.

How do I connect Deco points between floors using cables?

Follow TP-Link’s connection requirements for the mode you’ve selected. TP-Link recommends setting up the points on the same network in the app first, then connecting them with Ethernet. In router mode, satellites must be connected behind the main Deco’s LAN port. TP-Link describes other permitted connections for access point mode.

What can I do if the video starts stuttering just before a workshop?

Test the connection where you’ll be taking the workshop. For Zoom workshops, Zoom recommends turning off HD video when bandwidth is limited or, if audio is the priority, switching off your own video. This can help you adapt your usage, but it doesn’t prove that the Wi-Fi problem has been solved.

Who can help if my router breaks down too soon after purchase?

If a product is faulty, the seller is responsible for the statutory guarantee under Dutch law, according to ACM ConsuWijzer. A shorter manufacturer’s warranty does not cancel your statutory rights.

Do I need a licence or registration for Wi-Fi in the Netherlands?

No. According to the Dutch Radiocommunications Agency, Wi-Fi is an example of frequency use that does not require a licence, notification or registration in the Netherlands. Equipment placed on the EU market must still meet the applicable requirements for radio equipment; the manufacturer applies the CE marking when all requirements have been met.