Who is this relevant for?

Designer working upstairs

You upload files from a workspace separated from the modem by floors. First, work out whether the main issue there is a weak Wi-Fi signal.

Home worker with several workspaces

You want to work on different floors, so you need to assess both the coverage and the connection between any Wi-Fi access points.

Homeowner with existing network cabling

You may be able to connect Wi-Fi access points on each floor via Ethernet, and are looking for a system that supports this connection.

What should you look for?

What to consider What should you check? Who is this important for?
Wi-Fi on the floor where you work Compare the connection at your workspace, taking distance, walls and floors into account. I want to upload from the floor where I work without distance or floors weakening the Wi-Fi signal. Around 31% of consumers prioritise coverage in this area.
Upload speed itself Measure the upload speed via a cable at the modem, then compare it with the measurement at your workspace. I want to know whether my internet connection or Wi-Fi is limiting uploads of my design files. Around 31% of consumers put upload speed first.
Connection between Wi-Fi access points Check whether the exact model supports Ethernet backhaul; if the connection is wireless, also consider where you place the units. If I install Wi-Fi access points on several floors, I want to know how they’ll connect to each other. Around 23% of consumers prioritise this connection.
Compatibility with your existing network Check the router or access point mode, the ports you need and how many units are included. I want the Wi-Fi access points to work with my existing modem or router and the connections I already have. Around 15% of consumers prioritise this compatibility.

Common buying mistakes

  • Confusing faster Wi-Fi with faster internet uploads

    A speed test over a cable and one over Wi-Fi assess different parts of your connection. A new router won’t automatically fix a limited upload speed from your internet connection.

    Before replacing your equipment, compare the measurement taken via a cable at the modem with the one at your workspace.

  • Assuming the coverage in square metres guarantees a signal across three floors

    Distance, walls and floors all affect Wi-Fi. A stated coverage area doesn’t tell you how well the signal will reach every floor of your home.

    Check the connection at your intended workspace and the places where you plan to put your Wi-Fi access points.

  • Comparing only the number of Wi-Fi access points

    An extra unit won’t necessarily help if it can’t get a usable connection to the network itself.

    Check whether the exact model supports Ethernet backhaul. If you’re not using a cable, find out where the wireless units can still reach each other reliably.

Brands compared

TP-Link

The Deco X50 range is worth considering if you’re looking for an expandable mesh system with optional Ethernet backhaul.

  • TP-Link describes the Deco X50 as supporting both wireless connections and optional Ethernet backhaul.
  • The stated coverage varies by pack size and doesn’t guarantee a signal through the floors of your home.

ASUS

The ZenWiFi XD5 and ZenWiFi BD4 are different ranges, so check the specifications of the exact model.

  • ASUS describes the XD5 as supporting Ethernet backhaul. The BD4 is described as a dual-band Wi-Fi 7 range with two 2.5G ports per unit.
  • The BD4’s specifications don’t automatically apply to the XD5. Port speed alone won’t increase the upload speed of your internet plan.

FRITZ!

The FRITZ!Mesh Set 1700 is also available as a three-pack for extending an existing home network.

  • The manufacturer states that the three-pack includes three FRITZ!Repeaters 1700 and can connect to an existing router or modem.
  • Check the model and connection method. The manufacturer’s stated coverage isn’t a measurement taken in your home.

Linksys

Velop Micro 6 is an expandable dual-band mesh range to consider if you’re looking at using several access points.

  • Linksys lists gigabit ports for wired devices and a 2.5G internet port.
  • Linksys’s stated coverage and speeds aren’t independent measurements for a three-storey home.

Joybuy products for Wi-Fi across multiple floors

This selection includes TP-Link Deco mesh kits with several units to consider for Wi-Fi coverage across different floors. Check the connection between the units and the available ports for each model.

TP-Link Deco M4 (3-pack)

TP-Link Deco M4 (3-pack)

A three-unit set is one option to consider for Wi-Fi access points on several floors.

Dual-band (2.4 GHz and 5 GHz); Wi-Fi 5 (802.11ac); two network ports per unit.

View at Joybuy
TP-Link Deco X50 (3-pack)

TP-Link Deco X50 (3-pack)

This mesh kit is an option to consider if you want Wi-Fi access points on several floors. Also check how the units connect to each other.

Wi-Fi 6 (802.11ax); three gigabit ports per unit. TP-Link describes the Deco X50 as supporting optional Ethernet backhaul.

View at Joybuy
TP-Link Deco XE75 Pro (3-pack)

TP-Link Deco XE75 Pro (3-pack)

A three-unit mesh kit to compare if you’re considering Wi-Fi access points on several floors.

Tri-band (2.4 GHz, 5 GHz and 6 GHz); Wi-Fi 6E (802.11ax); three gigabit ports per unit.

View at Joybuy
TP-Link Deco XE75 (3-pack)

TP-Link Deco XE75 (3-pack)

This three-unit set is one option to consider for Wi-Fi access points on different floors.

Tri-band (2.4 GHz, 5 GHz and 6 GHz); Wi-Fi 6E (802.11ax); three gigabit ports per unit.

View at Joybuy
TP-Link Deco X50-PoE (3-pack)

TP-Link Deco X50-PoE (3-pack)

This set is worth considering if you’re looking at using several mesh units and PoE cabling.

Dual-band (2.4 GHz and 5 GHz); Wi-Fi 6 (802.11ax); PoE support and two Ethernet ports per unit.

View at Joybuy

Frequently asked questions

How can you tell whether a new router will help when uploading a design file?

First, measure your upload speed using a network cable at the modem, then compare it with the connection at your workspace. If the upload speed via cable is already limited, look into your internet connection. If it’s mainly the measurement at your workspace that’s poor, check your Wi-Fi coverage or consider running a cable to that spot.

Where should you place a wireless mesh access point?

Don’t put it only where coverage is worst: the unit still needs to be able to connect to the network. Check the connection at the intended location and see whether you can run Ethernet between floors.

What can you do if your router doesn’t work properly after purchase?

If a product is faulty, the seller in the Netherlands is responsible for putting things right. There’s no fixed legal two-year guarantee period; what you can expect from a product depends on factors including the product itself and normal use, according to the Dutch government.

Do you need a licence or registration to use Wi-Fi at home in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, you can use Wi-Fi at home without a licence if you use the designated frequencies and comply with the conditions of use. There’s no notification or registration requirement for this licence-free use.