Taking lessons on a hard-to-reach floor
If you usually take lessons in one fixed spot, first check whether a well-positioned extender will give you enough coverage there.
First, check that your broadband connection is working properly and that the problem is mainly a weak Wi-Fi signal where you take your lesson. A single extender may be enough to cover one weak spot, provided it can still connect to the router. If several floors have poor coverage, a mesh system or a wired access point may be a better fit. Powerline is another option if running an Ethernet cable is difficult, but test the connection using the sockets you plan to use.
If you usually take lessons in one fixed spot, first check whether a well-positioned extender will give you enough coverage there.
If you use your phone or laptop on different floors during a lesson, check the coverage in each of those spots.
If a wireless connection between floors is difficult, compare a wired connection with powerline, which uses your home’s electrical wiring.
First, test your broadband connection, then check how Wi-Fi performs where you take lessons and in any potential locations for additional access points. Choose a solution that suits the number of weak spots and the connection between the access points.
Choose this when: coverage is weak mainly in one place where you take lessons, and there’s still a usable signal between the router and that spot.
Bear in mind: the extender needs to connect to the router itself. Placing it where there’s no router signal won’t solve the problem.
Choose this when: Wi-Fi is needed on several floors or in multiple spots, or you move around the house during lessons.
Bear in mind: you’ll need several devices and power sockets. A stated maximum coverage area doesn’t guarantee coverage in your home.
Choose this when: an Ethernet cable can reach the floor where you take lessons or another access point.
Bear in mind: the cable needs to be in place or installed, and the device must support the required mode or backhaul.
Choose this when: running an Ethernet cable isn’t practical and you want to try connecting through your power sockets.
Bear in mind: performance can vary from socket to socket. A kit with one Wi-Fi adapter won’t automatically provide Wi-Fi in two distant places where you take lessons.
| What to consider | What should you check? | Who is this most important for? |
|---|---|---|
| Coverage across several floors | Test in the places where you take lessons and in possible locations in between; check how many access points are included in the kit. | If I take lessons on different floors, I want to know whether there’s coverage in each spot. Around 36% of consumers put multi-floor coverage at the top of their list. |
| Picture and sound during lessons | Compare a wired test with the connection where you take lessons, using the device you use for your lessons. | If I don’t want picture or audio to stutter during a lesson, I want to assess the connection in that exact spot. Around 29% of consumers give uninterrupted lessons their highest priority. |
| Connection between access points | Check whether an Ethernet cable is available and whether the device supports Ethernet backhaul or access point mode; test powerline using the sockets you plan to use. | If I have thick floors, I want to know how the access points can connect to one another. Around 21% of consumers prioritise the connection between the router and access points. |
| Simplicity and number of devices | Check what’s included in the box and whether the features you want work with your existing router. | If coverage is weak in just one spot, I don’t want to add more devices than I need. Around 14% of consumers give a simple solution with as little extra equipment as possible their highest priority. |
The extender needs to connect to the router itself. If there’s no usable router signal, it won’t be able to provide a good connection to your lesson spot through that router.
Place it between the router and the weak spot, somewhere the router signal still reaches. TP-Link recommends placing it roughly halfway between the two; obstacles may mean you need to position it closer to the router.
A high Wi-Fi speed on the box doesn’t, by itself, tell you how well the connection will work for your lessons. Floors, positioning and the connection back to the router all play a part too.
First, compare your broadband connection with a wired test. Then assess Wi-Fi where you take lessons, using the device you use for them.
The number of Wi-Fi adapters varies between kits. Devolo describes a starter kit with one Wi-Fi receiver and a multiroom kit with two.
Check how many adapters are included in the exact kit you’re buying and test the sockets you plan to use. Devolo recommends plugging adapters straight into a wall socket; nearby electrical appliances can affect the connection.
The RE705X is a standalone extender; Deco X50 is a mesh product range with different kit sizes available.
ZenWiFi XD5 is a mesh option for placing access points across several floors.
The EAX15 is a standalone Wi-Fi 6 extender for expanding an existing network.
Magic 2 WiFi 6 next offers a powerline option if running an Ethernet cable is difficult and Wi-Fi between floors is weak.
These products cover the powerline Wi-Fi, multi-point mesh, single wireless extender and wired access point options. When considering a specific listing, check that the model and any CE marking meet the applicable requirements for wireless equipment.
Image unavailable
Suited to the powerline option, which uses your existing electrical wiring to connect between floors.
Image unavailable
The product name specifies a mesh kit with three units, for anyone who needs Wi-Fi in several places around the home.
Image unavailable
The product name specifies a mesh kit with three units. TP-Link lists optional Ethernet backhaul for the Deco X50; check that the exact kit and your cabling are suitable for your setup.
Image unavailable
This repeater suits a single weak Wi-Fi spot. Place a wireless extender somewhere it can still connect to the router.
Image unavailable
Suited to a wired access point setup. The product information lists PoE+ (802.3at) and management through UniFi Network; check that your installation supports this power supply and management system.
Not before you’ve checked what’s causing the problem. First, test the connection on a computer using an Ethernet cable, then compare it with Wi-Fi where you take lessons. An extender won’t fix a problem with your broadband connection.
Place it between the router and the weak spot, somewhere the router signal still reaches. TP-Link recommends positioning it roughly halfway between the two; obstacles may mean you need to place it closer to the router.
No, don’t assume it will. For OneMesh on the RE705X, TP-Link specifically requires a OneMesh router. Check which combination you need for the feature you want to use with your router.
Test the adapters in the sockets and on the floors where you plan to use them. devolo recommends plugging them straight into a wall socket and notes that nearby electrical appliances can affect the connection.
Wireless equipment placed on the market in Europe must meet the applicable requirements and carry the required CE marking. The Dutch Digital Infrastructure Inspectorate explains this requirement; CE marking isn’t a measure of Wi-Fi coverage in your home.