Who is this guide for?

Uploading a portfolio from the loft

Want to find out before buying whether Wi-Fi is weak where you upload from, or whether your broadband connection is the limiting factor? Consumentenbond recommends testing your speed over an Ethernet cable to measure your broadband connection.

Weak Wi-Fi on several floors

Need a usable connection on more than one floor and want to consider where to place the equipment, how many points you need and how they connect to each other?

Keeping your existing router

Want to extend your network and check whether your chosen repeater or mesh features will work with your current router?

What should you consider when choosing?

Wired access point or mesh point

A good fit when: there’s already an Ethernet cable running to the floor where you upload from, or you can install one.

Consider: you’ll need a cable and a suitable operating mode. Ethernet backhaul connects mesh points using that cable.

Wireless repeater

A good fit when: coverage is poor in just one main location and you can place the repeater somewhere that still has usable Wi-Fi.

Consider: the wireless connection back to the router still depends on placement and obstacles. Check that it’s compatible with your router, too.

Wireless mesh system with multiple points

A good fit when: Wi-Fi is weak on several floors and it’s not practical to run cables between the points.

Consider: you’ll need several devices, and ceilings and the connection between points still affect coverage. Three points don’t guarantee coverage across three floors.

What to consider What should you check? Who is this important for?
Upload connection at your workspace Test using a wired connection at the router, then compare the result with the speed at your upload location. If I want to upload my portfolio from another floor, I want to know whether Wi-Fi or my broadband connection is the limiting factor. Around 36% of consumers are most concerned about having a reliable upload connection at their workspace.
Placement and coverage Check where a wireless point can still receive a signal and whether an Ethernet connection is possible. If I need usable Wi-Fi on several floors, I want to know where I can place the points and how they connect to each other. Around 29% of consumers prioritise coverage and placement across different floors.
Compatibility with your router Check the operating modes supported and the mesh requirements for the exact product. If I want to keep my current router, I want to know which extension features will work with it. Around 21% of consumers prioritise compatibility with their existing router.
Equipment and usage Compare how many points you need, whether you’ll need cables and how much power the equipment uses. If I don’t want to buy more equipment than I need to solve the problem areas, I’ll consider the number of points required and power usage. Around 14% of consumers focus mainly on the overall cost and support.

Common buying mistakes

  • Assuming a higher Wi-Fi speed rating means a faster portfolio upload

    Wi-Fi speed and broadband speed are measured at different points. Upgrading your Wi-Fi won’t solve a limitation with the broadband connection itself.

    First, test using a wired connection at the router, then test again at your workspace. Consumentenbond recommends using an Ethernet cable to test your broadband speed.

  • Placing a repeater where the router’s signal has already dropped out

    A wireless point depends on the connection it receives where it’s placed.

    Try a location between the router and your workspace where Wi-Fi is still usable. If there’s no suitable spot, look into a wired point.

  • Assuming three mesh points guarantee coverage across three floors

    Distances, ceilings and the connection between points vary from home to home. The number of devices alone doesn’t prove that your upload location will have good coverage.

    Check where you can place a point on each floor and whether the points can be connected via Ethernet.

Brands to consider

TP-Link

The Deco X20 is a multi-point mesh option for extending coverage in different areas.

  • TP-Link describes a three-point version with optional Ethernet backhaul.
  • The stated coverage is manufacturer information, not a guarantee for your home. Check the exact version and hardware revision.

ASUS

The ZenWiFi XD4 Plus is a three-point mesh option for use across several floors.

  • ASUS describes Ethernet backhaul for situations where suitable connections are available.
  • Stated coverage and speed don’t tell you what upload speed you’ll get on a particular floor.

FRITZ!

The FRITZ!Repeater 1200 AX is an option for extending an existing network in specific areas.

  • According to FRITZ!, the model has a Gigabit LAN connection and can connect to a FRITZ!Box via LAN.
  • Using it with another router doesn’t automatically mean you’ll get the same FRITZ! mesh features. There’s no evidence that a single repeater will solve coverage issues across all three floors.

Joybuy products for extending Wi-Fi

These products are multi-point wireless mesh systems for extending Wi-Fi to different areas of your home. The number of points doesn’t guarantee coverage on every floor. For the exact version, check the CE mark and declaration of conformity.

ASUS ZenWiFi BT8 (2-Pack) Tri-Band Wi-Fi 7

ASUS ZenWiFi BT8 (2-Pack) Tri-Band Wi-Fi 7

A two-point mesh system gives you more placement options for an upload location with weak Wi-Fi.

Tri-band: 2.4, 5 and 6 GHz. The product name specifies Wi-Fi 7 (802.11be).

Joybuy
TP-Link Deco X50 (3-Pack) Dual-Band Wi-Fi 6

TP-Link Deco X50 (3-Pack) Dual-Band Wi-Fi 6

A three-point mesh system gives you several placement options; coverage depends on your home.

Dual-band 2.4 and 5 GHz, Wi-Fi 6 (802.11ax) and three Gigabit Ethernet ports per unit, according to the product description.

Joybuy
ASUS ZenWiFi BT10 (2-Pack) Tri-Band Wi-Fi 7

ASUS ZenWiFi BT10 (2-Pack) Tri-Band Wi-Fi 7

This two-point mesh system gives you extra placement options; actual coverage depends on your home.

Tri-band with 2.4, 5 and 6 GHz, Wi-Fi 7 (802.11be) and Ethernet ports, according to the product description.

Joybuy
TP-Link Deco XE75 Pro (3-Pack) Tri-Band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-Pack) Tri-Band Wi-Fi 6E

A three-point mesh system offers several placement options, but doesn’t guarantee coverage on every floor.

Tri-band 2.4, 5 and 6 GHz and Wi-Fi 6E (802.11ax); Ethernet ports per unit, according to the product description.

Joybuy
TP-Link Deco XE75 (3 units) Tri-Band Mesh Wi-Fi 6E

TP-Link Deco XE75 (3 units) Tri-Band Mesh Wi-Fi 6E

This three-point mesh system can be placed in several areas; your home also affects the coverage you’ll get.

Tri-band 2.4, 5 and 6 GHz, Wi-Fi 6E (802.11ax) and three Gigabit Ethernet ports per unit, according to the product description.

Joybuy

Frequently asked questions

Will a Wi-Fi booster help if my portfolio also uploads slowly over an Ethernet cable?

Not if your broadband connection itself is the limiting factor. First, test using a wired connection at the router and compare the upload speed with the result at your workspace. If your broadband speed is repeatedly lower than expected, contact your provider.

Where should I place a wireless repeater?

Place it somewhere it can still receive a usable Wi-Fi signal, not where the signal has already dropped out. Then test again where you upload your portfolio.

What should I check after installing a mesh system?

Check the operating mode and the connection between the points. Keep the software up to date, and check how to verify the connection between points on your particular system.

What costs and support should I consider in addition to the purchase price?

Factor in how many points you need, whether you’ll need cables and how much power the equipment uses. Check the warranty and software support for the exact version.

Can I use any imported Wi-Fi repeater in the Netherlands?

No. Radio equipment must meet the applicable requirements. According to the Dutch Authority for Digital Infrastructure, equipment that doesn’t meet these requirements must not be sold or used. For the exact version, check the CE mark and declaration of conformity.