Live lecture viewer experiencing dropouts
Attends a live lecture from a regular study spot and wants to avoid losing picture or sound. KPN explains that a weak Wi-Fi signal can result in a slow or unstable connection.
First, check the connection where you attend your live lecture; you may not need a new router. The Consumers’ Association suggests three Wi-Fi points as one option for a three-storey home, but says that two are enough in many homes. If you need to extend your coverage, wired mesh or a wired access point is a good fit if you have network cables available. Without cables, wireless mesh is an alternative, provided you can position the points effectively.
Attends a live lecture from a regular study spot and wants to avoid losing picture or sound. KPN explains that a weak Wi-Fi signal can result in a slow or unstable connection.
Needs Wi-Fi beyond the floor where the existing router is located and wants to work out how many points are suitable. The Consumers’ Association offers advice on where to position Wi-Fi points around the home.
Can connect floors using cables and wants to weigh up mesh with Ethernet backhaul or wired access points. TP-Link, ASUS and devolo describe these connection options for their respective products.
Start by checking the connection where you attend your lecture, then choose how to extend it if needed. The Consumers’ Association suggests three points for three floors, but also advises that two are enough in many homes. The right set-up depends on where the signal is weak.
When: if the connection at your study spot is good enough after checking, or can be improved by repositioning the router.
Trade-off: you avoid an unnecessary purchase, but moving the router will not always overcome range problems caused by floors or obstacles.
When: if you need extra coverage on several floors and there are no network cables running to the locations you want to cover.
Trade-off: the points need a usable connection to each other; a point placed where the signal is already weak is not a reliable solution.
When: if suitable network cables are available between floors and your chosen model supports the wired mode you need.
Trade-off: existing connections make this option more practical; installing cables involves extra work.
| What to consider | What should you check? | Who will find this important? |
|---|---|---|
| Connection where you attend your lecture | First, test the existing connection there. Check coverage and stability, not just the Wi-Fi generation. | I want to avoid losing picture or sound during a live lecture; around 36% of consumers in this situation prioritise a stable connection at their study spot. |
| Coverage on each floor | Map out where the signal is weak and how many points you can position there. | If my lecture is on another floor, I want a usable Wi-Fi connection there; around 29% of consumers in this situation prioritise coverage on each floor. |
| Cables and positioning | Check whether there are network connections between floors and which connection modes the system supports. | I would rather not run new network cables through my home; around 21% of consumers in this situation prioritise an installation that does not involve cabling. |
| Purchase and electricity costs | Compare how many points you need, any cable installation costs and the power consumption of equipment that stays switched on. | I want to keep my existing router if it solves my problem and limit extra running costs; around 14% of consumers in this situation prioritise total costs. |
The speed shown on the box does not necessarily tell you how stable the connection will be at your study spot or on another floor. The Consumers’ Association also tests Wi-Fi extenders in different locations.
First, check where the connection is weak, then compare how the points can be positioned and connected.
Extra equipment still uses electricity, so factor this in when choosing a set that stays switched on.
An extra point also needs a usable connection to the network. Obstacles or placing it too far from the previous point can make the connection less reliable.
The Consumers’ Association recommends positioning points so that as few obstacles as possible lie between them. Where possible, use a suitable network cable.
If there is no suitable spot in between, you may need an extra point or a wired connection.
The devolo WiFi 6 Repeater 5400 Mesh Bundle contains two repeaters to extend an existing router’s coverage; the router does not automatically count as another usable Wi-Fi point.
Check that your existing router will actually provide coverage where you need it in the set-up you have chosen.
If the router cannot serve as a usable point, you may still need additional equipment.
The Deco X50 is a Wi-Fi 6 mesh range available in sets with different numbers of points.
According to ASUS, the ZenWiFi XD5 is a Wi-Fi 6 mesh system that can use Ethernet backhaul between hubs.
The WiFi 6 Repeater 5400 Mesh Bundle is an expansion set with two repeaters for an existing router.
According to the manufacturer, the FRITZ!Mesh Set 1700 can connect to and extend an existing router or modem.
These TP-Link Deco mesh systems are designed for anyone looking to extend Wi-Fi across several floors. Compare the stated Wi-Fi generation, frequency bands and connection options with your existing set-up. The Dutch Authority for Digital Infrastructure says radio equipment must carry the CE marking; check the device itself.
No image available
An option for anyone looking to extend Wi-Fi across several floors; the product description mentions mesh with Powerline alongside Wi-Fi 6.
Dual-band (2.4 GHz / 5 GHz); Wi-Fi 6 (802.11ax).
No image available
A mesh option for anyone looking to extend Wi-Fi coverage across several rooms; plan where to place the points based on where the connection is weak.
Dual-band (2.4 GHz / 5 GHz); Wi-Fi 5 (802.11ac).
No image available
A mesh set for extending coverage across several floors; TP-Link lists optional Ethernet backhaul for the X50 if you have suitable cabling.
Dual-band (2.4 GHz / 5 GHz); Wi-Fi 6 (802.11ax).
No image available
A mesh set for anyone looking to compare tri-band Wi-Fi with the needs and devices in their home.
Tri-band (2.4 GHz / 5 GHz / 6 GHz); Wi-Fi 6E (802.11ax).
No image available
A mesh option for anyone weighing up tri-band Wi-Fi against the devices and connections in their home.
Tri-band (2.4 GHz / 5 GHz / 6 GHz); Wi-Fi 6E (802.11ax).
No. The number of points you need depends on the connection in the places where you need Wi-Fi. The Consumers’ Association suggests three points as one option for three floors, but also says that two are enough in many homes. First, check the connection where you attend your lecture.
Don’t place it where the connection has already dropped out. According to the Consumers’ Association’s tips, points work best with as few obstacles as possible between them; also use the placement guide provided with your chosen system.
According to ACM ConsuWijzer, you have the right to choose your own router, and your provider cannot insist on a particular brand or model. There may be connection requirements for your own modem; a provider can refuse an unsafe device and must make the required connection settings available.
Radio equipment placed on the EU market must meet the applicable requirements and carry the CE marking. The Dutch Authority for Digital Infrastructure advises checking the marking on the device itself; seeing it mentioned on a product page does not in itself confirm that the item you receive is correctly marked.
Extra Wi-Fi points use electricity, and your equipment needs to be kept up to date. Compare the power consumption of your chosen set and keep your router’s firmware up to date; running costs depend on the equipment and how you use it.