Who is this relevant to?

Family with Wi-Fi dropouts on several floors

Wants to watch or share family videos on different floors and needs to work out where extra Wi-Fi access points are needed. The Consumers' Association recommends placing access points where you want to boost the signal.

Family with existing network cables

Can connect access points by cable and wants to avoid a weak wireless connection between floors. A wired access point is only an option if the chosen device supports this mode.

Family that wants to keep its current router

Is looking to extend its network without replacing the whole setup and wants to know whether a repeater, access point or specific mesh feature will work with its router.

What should you look for in Wi-Fi for family videos?

A single wireless repeater

A good fit when: the signal is weak in just one room or on one floor, and you can place the repeater within usable range of the router.

Bear in mind: the repeater still needs to receive the router's signal; mesh features require compatible equipment.

Mesh system with multiple access points

A good fit when: Wi-Fi is weak on several floors and you want to be able to place multiple access points.

Bear in mind: multiple devices need suitable locations and power; the advertised coverage is no guarantee of performance in your home.

Wired access point or Ethernet backhaul

A good fit when: network cables are already in place, or can be run, to the floors in question.

Bear in mind: you'll need cables and suitable connections; still check Wi-Fi where you watch or share videos.

Start with the places where you want to watch or share videos. Then decide whether the connection between the router and the extra access points will be wireless or wired.

What to consider What to look for when buying Who is this important for?
Coverage on each floor Map out where Wi-Fi is weak and check whether access points can be placed there. If I want to watch videos on different floors, Wi-Fi needs to be usable in those exact places; around 36% of this group prioritise coverage.
Connection between access points Check whether an Ethernet connection or access point mode is available; if placing the devices wirelessly, check the signal on each floor. I don't want the connection between floors to become another weak link when sharing videos; around 29% of the group prioritise this connection.
Router compatibility Make a note of your router model and check repeater, mesh and access point features separately. If I want to keep my router, the chosen extender needs to work with my model and the mode I want to use; around 21% prioritise compatibility with their existing router.
Overall setup Compare the number of access points needed, any cabling required and the stated power consumption. I want to know in advance how many devices and cables my setup will need, and what running them long term will mean; around 14% prioritise the total cost of ownership.

Common pitfalls

  • Placing a repeater where the router's signal has already dropped out

    A wireless repeater still needs to receive the existing signal. So if you place it where Wi-Fi is unavailable, it may not be able to pass on a usable connection.

    First, try a spot with a good connection to the router, then check coverage on the floor where you need it. The Consumers' Association recommends placing access points where they can reach one another and with as few obstacles as possible.

  • Confusing general router compatibility with mesh compatibility

    OneMesh and AiMesh each have their own requirements. A device may work with a router without supporting all the features of that mesh network.

    Check the exact router model and the mode you want to use. TP-Link states that OneMesh requires a compatible OneMesh router; ASUS requires a compatible AiMesh router for AiMesh.

  • Assuming the stated speed or coverage reflects results in your home

    Specifications and manufacturer claims don't measure the connection through the floors and obstacles in your home.

    Check the connection where you use your videos, and also pay attention to the connection between the access points.

Brands to consider

TP-Link

Offers standalone repeaters and mesh systems, including the RE705X and Deco X50.

  • According to TP-Link, the RE705X has a gigabit port; the model also has an access point mode.
  • OneMesh requires a compatible OneMesh router. TP-Link's stated coverage for a Deco X50 set isn't a measurement of performance in your home.

FRITZ!

The FRITZ!Repeater 3000 AX is a tri-band extender that can work with a compatible FRITZ! network.

  • According to FRITZ!, the model has two gigabit LAN ports and can also be used with other routers.
  • The integrated FRITZ! mesh features described apply to a network with a FRITZ!Box.

ASUS

The RP-AX58 is a standalone repeater that can also work as an access point or, with a compatible router, as an AiMesh node.

  • ASUS describes an Ethernet connection in access point and AiMesh modes.
  • AiMesh requires an AiMesh-compatible router; stated range doesn't guarantee coverage across three floors.

devolo

The WiFi 6 Repeater 5400 is described for use as a repeater or as a wired access point.

  • devolo describes both ways of using the device, including connection by network cable if one is available.
  • The shared mesh features work with compatible devolo devices; they aren't automatically compatible with every router.

NETGEAR

The brand lists standalone range extenders, including the EAX17 and EAX12.

  • The range includes standalone models for extending Wi-Fi.
  • Check the connections and placement requirements for each model; a product listing doesn't tell you how a device will perform in your home.

Products at Joybuy

This selection focuses on mesh systems with multiple access points for Wi-Fi in different parts of your home.

ASUS ZenWiFi BT8 (2-pack) Tri-Band Wi-Fi 7

ASUS ZenWiFi BT8 (2-pack) Tri-Band Wi-Fi 7

The set includes two mesh nodes for placement in different parts of your home; check the connection on the floors where you use your videos.

Tri-band Wi-Fi on 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 7 (802.11be). The product description lists Ethernet ports.

View at Joybuy
TP-Link Deco M4 (3-pack) Dual-band Wi-Fi 5

TP-Link Deco M4 (3-pack) Dual-band Wi-Fi 5

The set includes three mesh stations, giving you multiple points to place around your home, though performance also depends on where you put them.

Dual-band Wi-Fi on 2.4 GHz and 5 GHz; Wi-Fi 5 (802.11ac). The description lists two Ethernet ports per unit and roaming between Deco units.

View at Joybuy
TP-Link Deco X50 (3-pack) Dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack) Dual-band Wi-Fi 6

The set includes three mesh nodes for Wi-Fi in different parts of your home; check how the nodes can connect to one another across your floors.

Dual-band Wi-Fi on 2.4 GHz and 5 GHz; Wi-Fi 6 (802.11ax). The product description lists three gigabit ports per unit and optional Ethernet backhaul.

View at Joybuy
TP-Link Deco S7 (3-pack) Dual-band Wi-Fi 5

TP-Link Deco S7 (3-pack) Dual-band Wi-Fi 5

The mesh system includes three units for use in different parts of your home; check coverage where you watch videos.

Dual-band Wi-Fi on 2.4 GHz and 5 GHz; Wi-Fi 5 (802.11ac). The product description lists three Ethernet ports per unit.

View at Joybuy

Frequently asked questions

How can you tell whether one repeater will be enough?

First, check whether Wi-Fi is weak in one place or on several floors. Don't put a wireless repeater where the original signal has already dropped out: the device itself needs to be within range of the router. If you have problems on different floors, you could consider several well-placed access points.

Can you use a repeater if you already have network cables in place?

Yes, if the model you choose has an access point mode or a suitable LAN mode. TP-Link describes this option for the RE705X, ASUS for the RP-AX58 and devolo for the WiFi 6 Repeater 5400. Check which settings and connections your model requires.

Where should you check the Wi-Fi after installation?

Test the connection on the floors and in the places where you watch or share videos, and check the connection between the access points too. Keep your equipment secure, and bear the stated power consumption in mind if the access points will be switched on for long periods.

What cooling-off period and statutory guarantee apply to online purchases in the Netherlands?

For a standard online consumer purchase, you generally have a statutory 14-day cooling-off period from delivery; ACM ConsuWijzer notes that legal exceptions may apply. A product must also meet what you can reasonably expect from it. If it develops a fault too soon, the seller is responsible for providing an appropriate solution; the statutory guarantee isn't automatically limited to exactly two years.

Which rules apply to Wi-Fi equipment sold in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, only products with CE marking may be sold in the EU. The authority also lists cybersecurity requirements for radio equipment that apply from 1 August 2025. Check the documentation for the specific model; a brand name alone doesn't tell you whether a particular product meets the requirements.