Who is this guide for?

Audiobook listener with poor signal upstairs

Your download works near the router, but it’s slow or won’t work at all on another floor. You want to find out where you need extra coverage. The Consumers’ Association recommends measuring your internet speed using an Ethernet cable.

Audiobook listener who wants to find the cause first

You don’t want to buy a new router until you know whether the connection, the router’s position or the Wi-Fi is causing the delay. The Consumers’ Association recommends a wired test to assess your internet connection.

Homeowner with Ethernet cables between floors

You can connect Wi-Fi access points by cable and want to compare this option with a fully wireless system. TP-Link describes Ethernet backhaul as a way to connect compatible Deco units using an Ethernet cable.

What should you consider when using Wi-Fi across three floors?

Keep and reposition your existing router

Choose this if: your router is poorly positioned and you can move it.

Bear in mind: you may need a longer cable; repositioning the router won’t fix a slow internet connection.

Several wired Wi-Fi access points

Choose this if: there are Ethernet cables between floors, or you can install them.

Bear in mind: you’ll need compatible equipment and a working cable route. TP-Link describes Ethernet backhaul for compatible Deco units.

Wireless mesh system

Choose this if: the Wi-Fi is unreliable on several floors and running cables isn’t practical.

Bear in mind: the units still need to receive a strong enough signal from each other. A claimed range doesn’t guarantee coverage through the floors of your home.

One repeater

Choose this if: one area is just outside the good coverage zone and you can place the repeater somewhere with a usable Wi-Fi signal.

Bear in mind: performance depends on where the repeater receives the existing signal. One repeater won’t automatically solve problems across several floors.

The percentages below are for consumers looking for Wi-Fi to download audiobooks in a three-storey home. First, test your internet connection, then check where the Wi-Fi falls short.

Concern What to look for when buying Who is this important to?
Coverage across several floors Check whether you can add more units and think about where you could place them. I want to download upstairs and downstairs without making assumptions about coverage. Consumers who prioritise coverage across several floors make up around 36%.
Cause and cost Test your internet connection over a wired connection and compare it with Wi-Fi in the places where you listen. I want to find out whether the connection or the Wi-Fi is at fault before replacing any equipment. Consumers who want to establish the cause and whether a purchase is needed first make up around 29%.
Connection between Wi-Fi access points Check for Ethernet backhaul support and find out which Ethernet ports are available on each unit. I want to make use of existing Ethernet cables or find out whether I need to install new ones. Consumers who prioritise a wired connection between units make up around 21%.
Security and management Check how firmware updates are provided and how you manage the system. I want to be able to maintain and update my own network after installation. Consumers who prioritise secure management make up around 14%.

Common Wi-Fi mistakes in multi-storey homes

  • Assuming a higher claimed Wi-Fi speed guarantees faster downloads

    A slow internet connection, the router’s position and obstacles can all affect your download. A new device won’t fix a problem with your internet connection.

    First, measure your internet speed using an Ethernet cable, then test the Wi-Fi on the floors where you listen. The Consumers’ Association recommends a wired test to assess your internet connection.

  • Placing wireless units where the existing signal already drops out

    A unit connected wirelessly needs a usable connection of its own. A wired connection between compatible units avoids relying on a wireless link between them.

    Check the connection between the units during setup, and use any available Ethernet cables where appropriate. TP-Link describes Ethernet backhaul for compatible Deco units.

    If a unit can’t receive a usable signal, you may need to move it or install cabling after all.

  • Assuming a coverage claim or the number of units guarantees Wi-Fi across three floors

    Floors and other obstacles vary from home to home, so a quoted coverage area doesn’t guarantee good Wi-Fi on every floor.

    Test the signal where you listen and only add a unit if your measurements show that you need one.

Brands to compare

TP-Link

The Deco X50 is an expandable mesh system range available with two or three units.

  • According to the official specifications, each Deco X50 unit has three gigabit ports and optional Ethernet backhaul.
  • The stated coverage is a manufacturer’s claim, not a measurement taken in your home. Check which version you’re choosing.

FRITZ!

The Mesh Wi-Fi Set 1600, with three FRITZ!Repeater 1200 AX units, is an option if you want to use several access points.

  • FRITZ! describes mesh management and wired use of compatible repeaters.
  • Check that the configuration you choose supports the wired setup you want. Three units don’t guarantee coverage on every floor.

ASUS

ZenWiFi BD4 is an expandable dual-band mesh range, with a three-unit version listed in the official specifications.

  • ASUS specifies two 2.5G Ethernet ports for the BD4, as well as access point and AiMesh modes.
  • The ports are most useful if your cabling and equipment can make use of them; on their own, they don’t prove that audiobook downloads will be faster.

Mesh systems for Wi-Fi across multiple floors

These Joybuy products are mesh kits for anyone who wants to use Wi-Fi in several areas of their home. Check that the features and connections of each version suit your needs.

TP-Link Deco BE68 2-pack mesh system

TP-Link Deco BE68 2-pack

A two-unit mesh kit for anyone looking to build wireless coverage across several areas.

The product description lists tri-band Wi-Fi 7 and Ethernet ports on each unit.

View at Joybuy
TP-Link Deco X50 3-pack mesh system

TP-Link Deco X50 3-pack

A three-unit mesh kit for anyone who wants to test and extend Wi-Fi coverage across several areas.

The title lists Wi-Fi 6; the product description mentions optional Ethernet backhaul.

View at Joybuy
TP-Link Deco XE75 Pro 3-pack mesh system

TP-Link Deco XE75 Pro 3-pack

A three-unit mesh kit for anyone looking to build wireless coverage across several areas.

The product description lists tri-band Wi-Fi 6E and three Ethernet ports on each unit.

View at Joybuy
TP-Link Deco XE75 3-pack mesh system

TP-Link Deco XE75 3-pack

A three-unit mesh kit for anyone who wants to use Wi-Fi in several areas of their home.

The product description lists tri-band Wi-Fi 6E and three Ethernet ports on each unit.

View at Joybuy
TP-Link Deco X50-PoE 3-pack mesh system

TP-Link Deco X50-PoE 3-pack

A three-unit mesh kit for anyone looking to cover several areas and considering power over Ethernet.

The product description lists Wi-Fi 6, PoE support and two Ethernet ports on each unit.

View at Joybuy

Frequently asked questions

How can I tell whether a new router will make my audiobook download faster?

First, use an Ethernet cable to measure your internet speed on a computer, then compare it with the Wi-Fi speed in the places where you download. If the wired connection is repeatedly slow too, investigate your internet connection first or ask your provider for help. The Consumers’ Association recommends a wired test to assess your internet speed.

Can I use a mesh system behind my provider’s modem?

That depends on your equipment and how your network is set up. Check whether the system you choose has an access point mode and what settings your provider requires. The ACM explains that consumers in the Netherlands have the freedom to choose their own router, subject to connection and security requirements.

What maintenance does my own router need?

Keep its firmware up to date and check how the manufacturer provides updates. Veilig Internetten recommends keeping routers secure with the latest updates.

Can I use my own router in the Netherlands?

Yes. According to ACM ConsuWijzer, you have the freedom to choose your own router. There are security and connection requirements for connecting to your provider’s network, and the provider may refuse an unsafe device. If you’re replacing your modem, ask which settings and connection details you’ll need.

What product regulations apply to Wi-Fi equipment sold in the Netherlands?

The Dutch Authority for Digital Infrastructure states that radio equipment must meet the relevant European requirements and carry a CE mark to be sold in Europe. This doesn’t automatically confirm that a specific version meets those requirements.