Who is this guide for?

Resident with poor reception upstairs

You want to access the club archive on another floor and need to check whether a repeater in between can still receive a strong enough signal from the router. The Dutch Consumers’ Association notes that walls and ceilings can interfere with Wi-Fi signals.

User who relies on the archive connection

You want a reliable connection while reading or retrieving files, and need to weigh up wireless placement against a possible wired connection. TP-Link describes access point mode as a way to connect an extender to the router using an ethernet cable.

Resident who wants to keep their existing router

You want to extend your Wi-Fi without assuming that every mesh product will work with your current router. Check the router’s full model name and the compatibility information for the feature you plan to use.

What should you look for when buying?

Standalone wireless repeater

Suitable when: one area has poor reception and there’s a socket between the router and that area where the repeater can still receive a usable signal from the router.

Trade-off: you don’t need a network cable to the repeater, but its placement and any obstacles affect how well it can relay the signal. The Dutch Consumers’ Association highlights the impact of walls and ceilings.

Wired access point

Suitable when: you can run an ethernet cable to the floor where the archive is, particularly if the wireless connection between the router and repeater is too weak. TP-Link describes access point mode for this purpose.

Trade-off: the connection to the Wi-Fi point runs through a cable, but you’ll need to be able to route the cable and the model you choose must support the mode you need.

Multiple mesh Wi-Fi points

Suitable when: several floors or rooms need coverage and the points can work together or with your existing router.

Trade-off: multiple devices mean more equipment and can increase power consumption. Mesh features aren’t automatically interchangeable between different ecosystems, so check compatibility.

Consideration What should you look for? Who is this important for?
Reception between floors Check the intended repeater location and the archive; a signal indicator can help you choose where to put it. If I need reception upstairs, I want to know whether the repeater can still receive a connection from the router along the way. Around 36% of consumers say reception where the archive is located is their main concern when buying.
Reliable connection to the archive Compare a wired test by the router with one at the archive; if you’re running a cable, check for an ethernet port and access point mode. I want to open or retrieve archive files without prioritising ease of installation over the connection. For around 29% of consumers, a reliable connection comes first.
Compatibility with the router Note the router’s make and full model name, then check that it supports the mesh feature you want. If you want to keep your current router, you’ll want to avoid treating a general mesh label as a guarantee of compatibility. Around 21% of consumers say router compatibility is their main concern.
Total purchase and running costs Factor in the number of Wi-Fi points you’ll need and any cable run; also consider power consumption when the devices are in constant use. If I want to check whether one device will be enough, I’ll also consider any extra points and the power they use. For around 14% of consumers, total cost is the deciding factor.

Common mistakes

  • Putting the repeater somewhere the router barely reaches

    A repeater needs to receive a usable connection from the router first. Putting it somewhere with poor reception won’t make that connection stronger.

    Test reception somewhere in between. If the signal is still weak there, find out whether a wired access point is an option.

    If there’s nowhere with usable wireless reception, you may need to run a cable or add another Wi-Fi point.

  • Assuming every product labelled ‘mesh’ works with your router

    Mesh features may depend on specific router and extender combinations. For example, TP-Link links OneMesh to compatible OneMesh devices, while FRITZ! describes mesh networking with a FRITZ!Box.

    Check your router’s full model name and the compatibility information for the specific mesh feature you want to use.

    If the devices aren’t compatible, you may still need equipment from a compatible ecosystem.

  • Assuming the stated maximum speed is the speed you’ll get at the archive

    A product’s speed rating alone doesn’t tell you what connection you’ll get on another floor. Distance, floors, obstacles and the internet connection itself all play a part.

    Compare a wired test by the router with the connection where the archive is, and check reception there.

Relevant brands to consider

TP-Link

The RE range, including the RE500X, is an option for extending Wi-Fi with a standalone device. OneMesh is only relevant if the router and extender are compatible.

  • According to the Dutch RE500X product specifications, this model has a signal indicator, gigabit ethernet port and access point mode.
  • TP-Link requires a compatible OneMesh router for OneMesh; check the specifications of the specific extender and router.

NETGEAR

According to NETGEAR, the EAX12 is an example of a standalone Wi-Fi 6 extender for extending existing Wi-Fi coverage.

  • NETGEAR lists Wi-Fi 6 and a gigabit ethernet port for the EAX12.
  • Stated coverage and speeds aren’t measurements from a three-storey home; reception at the archive will also depend on placement and obstacles.

FRITZ!

The FRITZ!Repeater 1200 AX is an option for extending an existing FRITZ!Box, or if you’re looking for a repeater with a LAN connection.

  • FRITZ! lists a gigabit LAN connection and describes mesh networking with a FRITZ!Box.
  • According to FRITZ!, it can be used with other routers, but that doesn’t mean the same FRITZ! mesh features will be available.

devolo

The WiFi 6 Repeater 5400 is a standalone repeater that can be placed wherever needed. devolo also describes compatibility with other compatible devolo Wi-Fi products.

  • devolo lists a desktop design and an indicator showing the strength of the Wi-Fi signal it receives.
  • The stated maximum speed isn’t a measured speed at the club archive; check reception at the chosen location.

Products for different Wi-Fi setups

These Joybuy products cover mesh Wi-Fi for several areas, a standalone repeater or an access point with a wired connection to the Wi-Fi point. Actual coverage in a three-storey home will depend on placement and the conditions in the property.

TP-Link Deco BE68 2-pack mesh Wi-Fi system

TP-Link Deco BE68 (2-pack)

A mesh system with two units to consider if you need Wi-Fi in several areas.

Wi-Fi 7 and three Wi-Fi bands. The product description lists wired connections; the stated speeds aren’t measurements from this home.

View product at Joybuy
TP-Link Deco M4 dual-band mesh Wi-Fi system, 3-pack

TP-Link Deco M4 (3-pack)

The three connected units are an option if you need Wi-Fi in several areas.

Wi-Fi 5 and dual-band (2,4 GHz/5 GHz). The stated maximum speed is 1200 Mbps; this isn’t a measurement at the archive.

View product at Joybuy
WiFi Repeater Pro Black, standalone Wi-Fi repeater

Wifi Repeater Pro Black

A standalone repeater to consider for one weak spot, provided it can still receive a strong enough signal from the router along the way.

2,4 GHz and a stated maximum speed of 300 Mbps; this figure doesn’t guarantee a particular speed at the archive.

View product at Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N

Access point mode is an option if you can run an ethernet cable to the Wi-Fi point; the product description also lists range extender mode.

2,4 GHz, up to 300 Mbps, ethernet, Passive PoE, two antennas and WPS. Using it as an access point requires an ethernet connection to the Wi-Fi point.

View product at Joybuy
TP-Link Deco XE75 mesh Wi-Fi system, 3-pack

TP-Link Deco XE75 (3-pack)

A mesh system with three units to consider if you need Wi-Fi in several areas; coverage in this home hasn’t been tested.

Wi-Fi 6E and three Wi-Fi bands (2,4 GHz/5 GHz/6 GHz). The product description lists ethernet ports on each unit.

View product at Joybuy

Frequently asked questions

Where should you place a wireless repeater?

Don’t put it somewhere the router can barely reach. Find a position between the router and the archive where the repeater can still receive a usable connection; obstacles may mean you need to place it closer to the router.

Will a repeater help if the internet is slow next to the router too?

Not necessarily. First, compare a test using a network cable by the router with the connection in the problem area. A limitation with your internet connection needs a different solution from simply adding Wi-Fi coverage.

How can you keep the club archive connection working reliably?

After installation, check reception where you use the archive and keep your device software up to date. If the archive contains personal data and the club is responsible for processing it, the organisation must choose security measures that address the specific risks. A stronger Wi-Fi signal isn’t a substitute for access controls.

Do you need a licence to use Wi-Fi at home in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, you don’t need a licence or registration to use Wi-Fi on the designated frequencies, provided you comply with the conditions of use. Radio equipment placed on the market in the European Union must also meet the applicable conformity requirements and carry the CE marking.

What are your rights if an online repeater doesn’t suit you or stops working?

For a standard online purchase by a consumer, you’ll usually have a statutory 14-day cooling-off period after delivery, subject to legal exceptions, according to ACM ConsuWijzer. The seller must also provide a product that meets what you could reasonably expect; a manufacturer’s guarantee doesn’t replace these statutory rights.