Who is this advice for?

Student with a study space far from the router

Wants to use the study portal in one fixed location and needs to check whether a wireless repeater can still connect to the router from an intermediate spot.

Student with a possible cable route

Can run ethernet to another floor and wants to know whether an additional Wi-Fi point can work there as an access point.

Housemate who needs Wi-Fi on multiple floors

Wants coverage on more than one floor and needs to work out how many Wi-Fi points are required and how they will connect to each other.

What should you look for when buying?

The Consumers’ Association recommends placing a Wi-Fi extender somewhere the router’s signal is still usable, such as between the router and the area with weak coverage. So test the connection both at the extra Wi-Fi point and to the study portal in your study space.

Concern What to look for when buying Who is this important for?
Usable signal in the study space Check the reception in a possible intermediate location, then test the portal in the place where you’ll work. If you mainly want to work in one study space far from the router, you’ll want to know whether the signal reaches it. Around 36% of consumers say coverage in their study space is their main concern.
Connection between floors See whether ethernet is an option. If not, check reception in intermediate locations or test powerline in the sockets you plan to use. If you need a connection between the router and an extra Wi-Fi point, weigh up running a cable against using the electrical wiring. Around 29% of consumers prioritise this backhaul connection.
Coverage across multiple floors Work out where coverage falls short, how many points are included in the set and whether its mesh features work with your router. If you want to use the portal on more than one floor, consider which areas need coverage. Around 21% of consumers say coverage across multiple floors is their main concern.
Simplicity and number of devices Compare a single Wi-Fi point with a set, taking into account the areas with problems, installation requirements and the number of devices in use. If you want to cover one study space without adding more equipment than necessary, first work out how many points you need. Around 14% of consumers prioritise simplicity and the number of devices.

Pitfalls to avoid

  • Putting a repeater somewhere the router signal can’t reach

    A wireless repeater needs to connect to the router first. If it’s outside the router’s range, it can’t simply pass the signal on to your study space.

    Check reception in a possible intermediate location, then test the connection where you use the study portal.

  • Assuming every repeater works with mesh

    Mesh features may depend on the model and router. For example, FRITZ! Mesh requires a compatible FRITZ!Box; TP-Link OneMesh also requires a suitable router.

    Before buying, check the exact repeater and router models, as well as any firmware requirements for the features you want.

  • Assuming the advertised powerline speed is guaranteed

    According to devolo, sockets and electrical appliances can affect data transmission over the electrical wiring.

    Test the adapters in the sockets you plan to use and check the connection while accessing the study portal.

Brands to compare

TP-Link

Worth considering if you’re looking for a standalone repeater that, depending on the model, can also work in access point mode.

  • The manufacturer lists a gigabit ethernet port and a placement indicator for the RE605X.
  • OneMesh features require a compatible TP-Link router. Check the requirements for the specific combination.

FRITZ!

Worth considering if you already use a FRITZ!Box, or want to connect a repeater via Wi-Fi or LAN.

  • According to FRITZ!, a repeater can be added to FRITZ! Mesh during setup when used with a FRITZ!Box running FRITZ!OS 7 or later.
  • This Mesh requirement doesn’t automatically apply to any router. Check your own model and software version.

devolo

Powerline with Wi-Fi is one way to try to connect different floors when running a new network cable isn’t practical.

  • devolo describes adapters that send the signal through your home’s electrical wiring.
  • Sockets and electrical appliances can affect data transmission. According to the product information, Magic 2 WiFi next doesn’t support dLAN adapters.

NETGEAR

Worth considering if you’re looking for a Wi-Fi point that, depending on the model, can be used as a repeater or wired access point.

  • NETGEAR describes a wired access point setup using ethernet.
  • Check whether access point mode is available for each model and which connection it requires.

Joybuy products for different Wi-Fi setups

The products below suit different setups, including multiple mesh points, powerline, a wireless repeater or a wired access point. The right option for you depends on reception, whether you can run a cable and your home’s Wi-Fi needs.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68, 2-pack

A mesh set with two units is an option if you want Wi-Fi points in different locations. First, work out where coverage falls short.

View at Joybuy
TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT, powerline adapter starter kit

Powerline can be an alternative when running a network cable is difficult. Transmission over the electrical wiring can be affected by your home’s wiring and connected devices, as devolo explains.

View at Joybuy
TP-Link TL-WA850RE 300 Mbps Universal

TP-Link TL-WA850RE, 300 Mbps Universal

A wireless repeater may suit one study space if it can still receive a signal from the router at an intermediate location. Then test the connection where you work.

The product name states 300 Mbps; choose where to place it based on reception in your home.

View at Joybuy
TP-Link Deco XE75 Pro, 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro, 3-pack, tri-band Wi-Fi 6E

A set of three mesh units is worth considering if you want to place Wi-Fi points in several locations. First, work out which floors need coverage; the number of floors doesn’t automatically determine how many units you need.

The product name states tri-band Wi-Fi 6E.

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N, access point/Wi-Fi extender

This model is one to compare if you’re considering a wired access point or a repeater setup. You’ll need an ethernet connection to use it as an access point, so check which mode suits your setup.

The product name states up to 300 Mbps and Passive PoE.

View at Joybuy

Frequently asked questions

Does the repeater need to be in the room where the study portal has a weak signal?

Not necessarily. When using a wireless connection, the extra Wi-Fi point also needs to connect to the router. So first check an intermediate location, then test the portal in your study space.

Can a Wi-Fi extender be connected using a network cable?

Some models support access point mode via ethernet. The manufacturer lists this mode for the TP-Link RE605X; check the features and connections available on each model.

Do I need exactly three Wi-Fi points for three floors?

No. The number of points you need depends on where coverage falls short. The Consumers’ Association mentions three points as one option for three floors, but notes that two are enough in many homes. First work out which areas need Wi-Fi.

Which Dutch product regulation is relevant when buying?

The Dutch Authority for Digital Infrastructure states that radio equipment sold in Europe must meet the applicable European product requirements and carry a CE mark. Check the marking and the product version of the specific device.

How can I keep my home network secure?

The Consumers’ Association recommends using a strong password and keeping your router and Wi-Fi devices up to date. After installation, also check that the extra Wi-Fi point receives updates.