First, check that your internet connection is stable enough both at the router and where you plan to watch. Adding Wi-Fi equipment won’t fix a problem with the internet connection itself. If you can run a cable to a suitable location, consider a wired access point or mesh with Ethernet backhaul. For coverage across several floors, mesh with well-placed nodes may be a good fit. A wireless repeater is mainly an option if there’s still a spot between the router and your viewing location with a usable Wi-Fi signal.
Who are these solutions for?
Watching on a floor with poor coverage
You want to watch the recording on a floor where your existing Wi-Fi signal drops out. The connection at your viewing location and the route to it both matter. The Consumers’ Association (Consumentenbond) recommends positioning Wi-Fi nodes so they can communicate effectively with one another.
Watching across several floors
You use Wi-Fi on more than one floor and want to know how many extra nodes you’ll need, without automatically opting for a three-node kit. The Consumers’ Association lists both two- and three-node configurations as possible options, depending on the property.
Watching where you can run a cable
You can run Ethernet to a suitable location and want to consider a wired connection between the router and an additional Wi-Fi node. TP-Link describes both access point mode and Ethernet backhaul for certain models.
What should you look for when choosing?
Wireless repeater
When to choose it: if coverage is poor mainly in one viewing location and there’s still a usable Wi-Fi signal somewhere in between.
The trade-off: the wireless connection between the repeater and router still matters. Also check whether any mesh features will work with your router.
Mesh with multiple Wi-Fi nodes
When to choose it: if you need coverage across different floors or locations.
The trade-off: you’ll be using more equipment. First check whether two nodes are enough, and add another only if you find you need it.
Wired access point or Ethernet backhaul
When to choose it: if you can run an Ethernet cable to the floor where you’ll be watching, or to a suitable spot in between.
The trade-off: this solution requires cabling and compatible connection and router modes.
Powerline with Wi-Fi
When to choose it: if running an Ethernet cable isn’t practical and you want to use your existing electrical wiring.
The trade-off: performance can vary between sockets and be affected by electrical appliances. Test the sockets you plan to use.
Look beyond the device itself and consider the connection between the router, any additional nodes and the place where you’ll be watching. For speed requirements specific to a streaming service, follow that service’s guidance. For example, Netflix recommends 5 Mbps for 1080p and 15 Mbps for 4K; these figures aren’t general requirements for every theatre recording.
| What to consider |
What should you check? |
Who is this important for? |
| Stable playback |
Check the connection at the router and where you’ll be watching. Compare the measured connection with the requirements of the video service you’re using. |
I want the recording to play smoothly where I’m watching, so I’ll also check that the connection is stable at the router itself. Around 36% of consumers say stable playback at their viewing location is their top priority. |
| Coverage across three floors |
Test the connection on the floors where you’ll be watching and check whether additional nodes can communicate effectively with one another. |
If I watch on different floors, I want to know how many Wi-Fi nodes I really need before choosing a kit. Around 29% of consumers prioritise coverage across multiple floors. |
| Installation and compatibility |
Make a note of your router model and check the mesh features you want, the Ethernet ports available and the connection mode. |
I want to know in advance whether my chosen solution will work with my router and whether I can run a cable. Around 21% of consumers prioritise installation and network compatibility. |
| Overall solution |
Compare the equipment you’ll need, the number of nodes and the connection options for the places where you need Wi-Fi. |
I compare the complete setup rather than just the first device, so I can choose the right number of nodes for my home. Around 14% of consumers prioritise the overall cost of the solution. |
Common pitfalls
-
Putting a repeater where the router’s signal has already dropped out
A wireless repeater relies on the signal it receives to connect to the router.
First, find an intermediate spot with a usable signal, then test the connection where you’ll be watching. Consider cabling if the wireless connection between the two remains inadequate.
You may still need an additional Wi-Fi node or a different way to connect later.
-
Assuming the stated Wi-Fi speed guarantees smooth streaming
A product specification can’t replace testing the signal through the floors and walls of your home.
Test the connection where you’ll be watching, and don’t base the number of nodes you need solely on a stated speed or coverage figure.
-
Assuming every repeater has the same mesh features
A repeater’s ability to connect to a router doesn’t automatically mean that all mesh features will work together.
Check the router model, the mesh features supported and the connection mode of both devices.
You may need a different device or a complete kit to get the mesh features you want.
-
Assuming powerline is a guaranteed alternative to Ethernet
Powerline performance can vary between sockets and may be affected by electrical appliances. Devolo notes this for its own powerline products.
Test the sockets you plan to use on the floors where you need a connection before relying on them for the recording.
Brands worth comparing
TP-Link
The RE705X is an option for extending coverage from a suitable intermediate location, or for use as a wired access point. The Deco X50 is designed for a mesh setup with optional Ethernet backhaul.
- TP-Link lists a gigabit Ethernet port and access point mode for the RE705X. For the Deco X50, TP-Link describes Ethernet backhaul.
- OneMesh support doesn’t mean the RE705X will work with every mesh system. These specifications don’t guarantee coverage in your home.
FRITZ!
The Repeater 1200 AX is an option for extending an existing network; the Mesh Set 1700 is a kit with multiple nodes.
- FRITZ! lists one gigabit LAN connection on the 1200 AX. The manufacturer says the Mesh Set 1700 can connect to an existing router, including one from another brand.
- Check which mesh features will be available in your setup and which kit size to choose.
ASUS
The ZenWiFi BD4 is a multi-node mesh option if wired connections are important too.
- ASUS specifies two 2.5-gigabit ports per unit and dual-band Wi-Fi 7 for the BD4.
- These specifications don’t measure streaming speed on another floor. Also check the exact kit variant.
devolo
Magic 2 WiFi 6 next is a powerline Wi-Fi option if running an Ethernet cable between floors isn’t practical.
- The manufacturer describes network transmission over your electrical wiring.
- Devolo warns that certain sockets and electrical appliances can affect performance. Test the connections you plan to use.
KPN
SuperWifi is a provider-specific option for a household with a compatible KPN home network.
- KPN offers multiple SuperWifi nodes and advice on where to place them.
- A brand’s coverage claim doesn’t prove how many nodes will be enough in your home. Check your modem and the version on offer.
Wi-Fi solutions at Joybuy
This product selection includes mesh kits with multiple Wi-Fi nodes, powerline with Wi-Fi and a standalone repeater. Compare the connection type and the location where you can use the device with the route to your viewing location.
No image available
TP-Link Deco BE68 2-Pack
A mesh kit with two units for use in multiple locations. The product description lists tri-band Wi-Fi 7 and wired or wireless backhaul.
View at Joybuy
No image available
TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5
A mesh kit with three units for use in multiple locations. The product details list dual-band Wi-Fi 5 (802.11ac) on 2,4 GHz and 5 GHz.
View at Joybuy
No image available
TP-Link TL-WPA7517 KIT Starter Kit
An option if you want to extend your network over existing electrical wiring instead of running an Ethernet cable between floors.
View at Joybuy
No image available
TP-Link TL-WA850RE, 300 Mbps
For extending coverage to a viewing location, provided the repeater still receives a usable Wi-Fi signal from an intermediate spot. The product details list Wi-Fi 4 (802.11n), 300 Mbps and an Ethernet port.
View at Joybuy
No image available
TP-Link Deco M4 (3-pack), dual-band Wi-Fi 5
A mesh kit with three units for use in multiple locations. The product description lists Wi-Fi 5 and a maximum combined Wi-Fi speed of 1200 Mbps; this isn’t a measurement of streaming speed on a particular floor.
View at Joybuy
Frequently asked questions
Will a Wi-Fi booster help if the recording also stutters next to the router?
Not necessarily. First, test the connection at the router and where you’ll be watching. If the internet connection or the video service you’re using is the limiting factor, an extra Wi-Fi node won’t fix it. Netflix’s speed recommendations apply specifically to Netflix.
Where should I place a wireless repeater?
Place the repeater somewhere in between where it can still receive a usable Wi-Fi signal, with as few obstacles as possible between it and the other Wi-Fi node. Then test the connection where you’ll be watching.
Should I buy three mesh nodes straight away for a three-storey home?
Not necessarily. The Consumers’ Association’s advice lists three nodes as an option for a three-storey home, but also notes that two may be enough for many properties. Test the coverage in your home before deciding whether you need another node.
What warranty applies if a Wi-Fi node I’ve bought breaks down early?
According to ACM ConsuWijzer, you’re entitled to a legal guarantee if a product breaks down sooner than you could reasonably expect. The seller must then offer a suitable solution at no cost. This right isn’t automatically limited to two years.
What Dutch rules apply to a Wi-Fi booster?
Radio equipment placed on the market in the Netherlands must meet the applicable requirements for radio equipment and carry the mandatory CE marking. The Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur) also outlines RED 3.3 cybersecurity requirements for applicable equipment, which have applied since 1 August 2025. A CE marking doesn’t tell you how much coverage you’ll get at home.