Who should consider this choice?

Club member behind thick walls

Wants to access the archive from somewhere with a weak Wi-Fi signal and needs to find out whether there’s a suitable spot in between with a usable connection. The Consumers’ Association recommends positioning Wi-Fi points with as few obstacles as possible between them.

Club with the option to install cabling

Can run a network cable to the archive and is looking for a suitable access point or mesh point there. TP-Link and ASUS describe wired features that only work with compatible devices and configurations.

Club network administrator

Needs to check not only Wi-Fi coverage, but also whether devices on the chosen network are allowed to access the archive. With TP-Link’s documented guest network settings, access to the local network can be managed separately.

What should you look for when choosing?

Concern What to look for Who is this more important to?
Connection through the wall Compare running a cable with using a wireless point in between; test the connection where the archive will be used. If the archive is behind a thick wall, I want to know whether the connection really reaches the room. Around 33% of consumers say getting a usable connection on the other side of the wall is their main buying concern.
A suitable spot for a repeater Check whether there’s a socket in a spot where the repeater can still receive a usable signal from the router. Without a cable, I need to find a spot where the repeater can still connect to the router. Around 27% of consumers are mainly looking for a suitable spot in between with a usable wireless signal.
Access to the archive Check which network the archive is on and ask the administrator about any guest network restrictions. I need to be able to open the archive from the network it’s on; internet access alone isn’t enough. Around 20% of consumers prioritise access to the local archive.
Complete solution and management Check how many adapters or network points you’ll need, and look at energy use and available updates. I want to know in advance which components I need and what’s involved in managing them. Around 20% of consumers put the complete solution and its management ahead of other buying concerns.

Pitfalls to avoid when choosing

  • Putting a repeater straight behind the thick wall

    A repeater needs a usable connection to the router itself. If the signal is already weak where you place it, the device won’t automatically fix the connection.

    First, check for a spot before the weak-signal area. If there isn’t a suitable spot with a usable signal, consider running a cable or using powerline.

  • Confusing router compatibility with full mesh compatibility

    An extender may work with a router without supporting all the features of a particular mesh system. Some features require a compatible router and the right hardware or firmware versions.

    Before choosing a device, check the exact router model and the feature you want, such as mesh or Ethernet backhaul.

  • Taking the stated maximum speed as proof that you can access the archive

    The connection depends on the placement, the wall and the route between the network points. Access permissions can also prevent you from reaching the archive.

    Test both the connection and the archive itself in the spot where it will be used. If the connection isn’t good enough there, you may still need different equipment or a cable route.

  • Connecting to the guest network without checking the route to the archive

    With TP-Link’s documented guest network settings, the option for access to the local network determines whether guests can reach devices on the main network.

    Ask the club administrator which authorised network route provides access to the archive, rather than changing security settings without checking first.

Brands to consider

TP-Link

Offers standalone range extenders and wired EasyMesh connection features on compatible hardware.

  • According to TP-Link, the RE305’s signal indicator helps you decide where to place it.
  • OneMesh requires a compatible TP-Link router; Ethernet backhaul via EasyMesh requires support from both the main router and the satellite.

ASUS

The RP-AX58 is designed to extend an existing Wi-Fi connection and, according to ASUS, can also work in access point mode.

  • ASUS states that it works with many routers and supports access point mode.
  • The more advanced AiMesh features require a compatible AiMesh router.

devolo

The Magic 2 WiFi 6 next Starter Kit is a powerline kit for situations where you want the connection to run through the electrical wiring.

  • The manufacturer describes the Starter Kit as a set containing two adapters.
  • Test the connection using the sockets the club will actually use.

NETGEAR

The EAX15 is a Wi-Fi extender for extending an existing connection.

  • NETGEAR states that the EAX15 has a gigabit Ethernet port.
  • Check that the operating mode you want suits the existing router and the club’s setup.

Joybuy products

These Joybuy products cover powerline Wi-Fi, wireless extension and a wired access point for a club archive. For wireless equipment intended for the Dutch market, check that the version on offer carries the required CE marking; according to the Dutch Authority for Digital Infrastructure, only products with CE marking may be sold in Europe.

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

A good fit for a powerline setup if you don’t want the connection to pass wirelessly through the wall; test the available sockets on site.

View at Joybuy
Wi-Fi Repeater Pro Black

Wi-Fi Repeater Pro Black

Consider this repeater only if there’s a spot where it can still receive a usable signal from the router; then test access to the archive.

View at Joybuy
TP-Link Omada EAP653 access point, 2976 Mbit/s, white, Power over Ethernet

TP-Link Omada EAP653 access point, 2976 Mbit/s, white, PoE

A good fit for a setup with an access point on the archive side, if a cable can be run there.

Product name states 2976 Mbit/s and Power over Ethernet (PoE).

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender, N up to 300 Mbps, 2 antennas, WPS, passive PoE

TP-Link TL-WA801N access point and Wi-Fi extender, N up to 300 Mbps, 2 antennas, WPS, passive PoE

The product name lists both access point and extender use; check that the mode you choose suits the club’s cable route and router.

Product name states N up to 300 Mbps, 2 antennas, WPS and passive PoE.

View at Joybuy
TP-Link Omada EAP613 access point, 1775 Mbps, white, Power over Ethernet

TP-Link Omada EAP613 access point, 1775 Mbps, white, PoE

A good fit for a wired access point setup on the archive side; check the installation and positioning requirements in advance.

Product name states 1775 Mbps and Power over Ethernet (PoE).

View at Joybuy

Frequently asked questions

Will a repeater help if you plug it in just behind the thick wall?

Only if the repeater can still get a usable connection to the router there. Otherwise, try a spot before the weak-signal area or look into a wired connection.

How can you check that the club archive is accessible after installation?

Open the archive from the place where it will be used. If it’s on the local network, also ask the administrator to check access permissions and whether it’s separated from a guest network; internet access alone doesn’t prove that the archive is accessible.

What should you look for when it comes to maintenance and ongoing costs?

Check for available firmware updates and the energy use of all the devices you need. For powerline, also compare what’s included in the starter kit with the adapters you’ll need.

Is there a fixed two-year legal guarantee period in the Netherlands?

No. According to the Dutch government, there’s no fixed period for the legal guarantee in the Netherlands. What you can expect from a product depends, among other things, on the product itself and the sales information. A manufacturer’s or seller’s guarantee is separate from this.

Do you need a frequency licence or registration to use Wi-Fi in a club?

The Dutch Authority for Digital Infrastructure lists Wi-Fi as equipment that can be used in the Netherlands without a licence, notification or registration, including for business purposes, as long as the conditions of use are met. Radio equipment sold in Europe must also meet the applicable product requirements and carry CE marking.