Who is this relevant to?

Reading behind a thick wall

You want to download magazines in a room where your existing Wi-Fi signal is weak. You may be able to run a network cable to that room.

Unable to run a cable

You want Wi-Fi in several rooms without installing new cables. In that case, a wireless mesh node needs to be placed somewhere it can still get a good signal.

Using a provider-supplied modem

You want to keep your existing internet connection and find out whether an extra Wi-Fi point, access point mode or your own router would suit your setup.

What should you look for when choosing?

Move your existing router

Choose this if: reception where you read improves when the router is placed more centrally, higher up or outside a cupboard.

Bear in mind: moving it may require a longer cable, and it won’t solve every problem caused by walls or floors.

Wired access point or mesh node

Choose this if: you can run a network cable to the other side of the obstacles.

Bear in mind: cabling, power and installation take extra work; also check the ports and access point mode.

Wireless mesh system

Choose this if: you can’t run cables and there’s a spot where an extra node can reach both the main node and the place where you read.

Bear in mind: walls and placement also affect the wireless connection between nodes.

Just a new router

Choose this if: the location, features or condition of your current router is the problem, and one well-placed Wi-Fi point can reach where you read.

Bear in mind: a newer Wi-Fi standard won’t automatically overcome a thick wall; also check how it connects to your provider’s device.

What to consider What to check before buying Who is this important for?
Coverage behind thick walls Compare reception where you read before and after moving the router; check whether you can install a wired access point there. If I download magazines behind a thick wall, I want a reliable connection in that spot and will consider running a cable if needed. Around 36% of consumers say coverage beyond walls is their top priority.
Coverage without a network cable Find a spot for the node where it gets good reception from the main network and can also reach the place where you read; don’t base your choice solely on the stated coverage area. If I can’t run a cable, I want to add a point that still has a good connection of its own. Around 29% of consumers prioritise coverage without a network cable.
Connecting to your existing network Check the Ethernet connection and access point mode you’ll need. If you’re replacing your modem, ask your provider which connection details and network requirements apply. If I want to keep my provider’s network, I’m looking for an extension that works with my existing setup. Around 21% of consumers give this connection the highest priority.
Avoiding unnecessary equipment First test the connection where you read and work out how many Wi-Fi points you need; also check which Wi-Fi standard your reading device supports. I want to solve the reception problem without choosing features or extra points I don’t need. Around 14% of consumers put this first.

Common buying mistakes

  • Choosing based only on the highest advertised Wi-Fi speed

    Walls and distance affect the signal. An older reading device also won’t automatically benefit from improvements in a newer Wi-Fi standard.

    First, test the connection where you read, then decide what coverage or connection you need.

  • Putting a wireless mesh node somewhere with barely any reception

    The connection between the node and your existing network needs to work too; an extra point won’t fix that connection by itself.

    Try a spot between the router and the place where you read. If the walls also interfere with the connection between nodes, consider Ethernet backhaul.

  • Mistaking an access point for a complete modem

    According to its model specifications, the UniFi U6+ is an access point connected via Ethernet and powered by PoE, not a direct replacement for a modem.

    Check the functions and connections of the device you choose, and what power supply and network equipment your setup requires.

Brands to consider

TP-Link

The Deco X50 range is designed for mesh Wi-Fi with multiple units and optional Ethernet backhaul.

  • TP-Link Netherlands lists three gigabit ports on each Deco X50 unit and support for a wired connection between units.
  • The stated maximum coverage is a manufacturer’s claim, not a measurement taken behind the walls of your home.

FRITZ!

The FRITZ!Repeater 1200 AX is an extra Wi-Fi point for anyone who wants to keep their existing router; it isn’t a standalone modem.

  • FRITZ! describes connection in LAN bridge mode, including with a router from another manufacturer.
  • FRITZ! specifies a network cable for this type of connection.

ASUS

ZenWiFi and AiMesh offer a mesh option with documented Ethernet backhaul and access point mode.

  • ASUS documents several connection setups for mesh systems.
  • The ports and settings required vary by setup; the documentation is not an independent measurement of coverage behind thick walls.

Netgear

Netgear describes both wireless connections and Ethernet backhaul for Orbi satellites.

  • The manufacturer documents both connection options.
  • Check support for the specific Orbi model; the documentation doesn’t guarantee download speeds in your home.

Ubiquiti

The UniFi U6+ is a wired access point for a spot with an available network connection.

  • The official model specifications list a gigabit Ethernet port, PoE power and UniFi Network management software.
  • It’s an access point, not a direct modem replacement; check the power and management setup you’ll need in advance.

Joybuy products for this Wi-Fi setup

This selection includes mesh systems that support wired backhaul, a standalone router and wired access points. For each model, check which connections, power supply and installation are suitable for your network.

ASUS ZenWiFi BD4 dual-band Wi-Fi 7

ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7

A good fit if you’re looking for a mesh system that supports wired backhaul and want to connect your existing modem to the main unit.

The product description lists Wi-Fi 7, dual-band 2.4/5 GHz and a total speed of 3600 Mbps. It also mentions setup via the ASUS Router app and wired backhaul.

View at Joybuy
ASUS RT-AX52 AX1800 dual-band AiMesh router

ASUS RT-AX52 AX1800 AiMesh router

A good fit if you’re looking for a standalone router to connect to a modem, with the option of using compatible routers via AiMesh later.

The product information lists Wi-Fi 6, dual-band 2.4/5 GHz, MU-MIMO, OFDMA and Gigabit Ethernet.

View at Joybuy
TP-Link Deco X50 Wi-Fi 6 mesh system, 3-pack

TP-Link Deco X50 Wi-Fi 6 (3-pack)

A good fit if you want to extend coverage with several mesh units and may be able to use Ethernet backhaul between them.

The product information lists three nodes included, Wi-Fi 6 and three gigabit Ethernet ports per unit. Ethernet backhaul between the units is optional.

View at Joybuy
TP-Link Deco X50-PoE Wi-Fi 6 mesh system, 3-pack

TP-Link Deco X50-PoE Wi-Fi 6 (3-pack)

A good fit if you’re looking for a mesh system with three units and want to consider PoE as part of a wired installation.

The product information lists Wi-Fi 6, PoE support and two Ethernet ports per unit. This is the X50-PoE variant; check the power supply and connections for your setup.

View at Joybuy
TP-Link Omada EAP613 Wi-Fi 6 access point

TP-Link Omada EAP613 Wi-Fi 6 access point

A good fit if you want Wi-Fi in a spot with an Ethernet connection and can mount an access point on a wall or ceiling.

The product information lists 1775 Mbps, an Ethernet port and power via 802.3at PoE, passive PoE or DC. Check which power option is available in your installation.

View at Joybuy

Frequently asked questions

Can I use my own router instead of the one supplied by my internet provider?

Yes. ACM ConsuWijzer explains that you have the freedom to choose your router. Additional connection and security requirements may apply if you use your own modem, so ask your provider for the required settings if needed. Connecting an extra access point is not the same as replacing the modem.

Where should I put an extra wireless Wi-Fi point?

Don’t automatically put a wireless Wi-Fi point in the room with no reception: it also needs to communicate with your existing network. Try a spot between the router and where you read, then check the connection there. With a network cable, you can place the point beyond the obstacles.

Do I need a licence or registration for home Wi-Fi in the Netherlands?

No notification or registration is required for the licence-exempt Wi-Fi use described by the Dutch Authority for Digital Infrastructure. Follow the applicable settings and instructions; this doesn’t mean you can choose any country or transmission settings you like.

What security and maintenance checks should I carry out after installation?

Keep your equipment up to date: ACM ConsuWijzer says updates are important for protecting your network and personal data. The Dutch Authority for Digital Infrastructure recommends using the correct country settings, as incorrect settings can cause interference.

Will I need extra power or connection equipment?

Extra Wi-Fi points use electricity. Whether you’ll also need a cable, PoE power supply or other network equipment depends on the setup you choose, so check the connection and power requirements for the specific model.