Who is this buying guide for?

Seminar presenter behind thick walls

You present from a room where the existing Wi-Fi signal is weak and want to improve the connection at your workspace, ideally with a cable if that’s practical. The Consumers' Association recommends testing with a wired connection; TP-Link describes Ethernet backhaul for the Deco X50.

Video caller without a cable route

You can’t run an Ethernet cable to the other room, so you need to weigh up whether you can place a wireless mesh node somewhere suitable, or whether powerline mesh will work with your electrical wiring. TP-Link describes powerline as the connection between Deco PX50 nodes.

User who wants to keep their existing router

You want to test the connection and improve your router’s position before adding any equipment. The Consumers' Association discusses testing with a wired connection, while FRITZ! and Ubiquiti describe equipment that can be used to supplement an existing router.

What should you look for when choosing?

Improve your existing router set-up

Choose this if: your wired connection is good and your router is in a poor location, such as a utility cupboard.

Bear in mind: moving or adjusting the router could save you from buying anything, but it won’t always fix a weak signal caused by distance or thick walls.

Wired access point or mesh

Choose this if: you can run an Ethernet cable close to your seminar space and walls are disrupting the wireless connection between nodes. TP-Link describes Ethernet backhaul for the Deco X50.

Bear in mind: you’ll need a suitable cable route and connections. The Ubiquiti UniFi U6+ is an access point, not a replacement internet modem.

Wireless mesh or repeater

Choose this if: you can’t run cables and can position an extra node somewhere it still has a usable wireless connection to the router.

Bear in mind: a node placed beyond the same obstructing wall still needs to connect to the router. According to FRITZ!, the FRITZ!Repeater 3000 AX can also work via LAN; the automatic mesh integration described applies to a FRITZ!Box set-up.

Powerline mesh

Choose this if: running a network cable isn’t practical and powerline works across the electrical wiring in question. TP-Link describes G.hn powerline for the Deco PX50.

Bear in mind: check in the app that powerline backhaul is active. According to TP-Link, the PX50 doesn’t form a powerline backhaul with the Deco PX10, P7 or P9.

Concern What should you check? Who is this important for?
Coverage at your seminar workspace Check whether you can run a cable to the extra Wi-Fi node and where you could position it. If my seminar space is behind thick walls, I want usable Wi-Fi right there. Around 36% of consumers prioritise coverage at their workspace.
Stability during calls Test with a wired connection, then try a real call at your workspace. Check whether you can run a cable to your computer or between Wi-Fi nodes. I don’t just want a good connection by the router during a seminar; I want one where I’m presenting, too. Around 29% of consumers give call stability top priority.
Set-up without a network cable Check the connection to a wireless mesh node in its planned position, or confirm in the app that powerline backhaul is active. If I can’t run a cable through the house, the connection between the Wi-Fi nodes needs to work another way. Around 21% of consumers prioritise set-up without a network cable.
Keeping your existing equipment Test the connection and try changing the router’s position first; then check whether an extra access point or repeater will work with your current network. I want to keep my router if possible and avoid replacing equipment before I know what’s causing the problem. Around 14% of consumers prioritise keeping their equipment and avoiding unnecessary spending.

Common buying mistakes

  • Assuming a higher theoretical Wi-Fi speed will solve thick-wall problems

    The connection at your seminar workspace may still be weak, even if the stated speed is high. A local Wi-Fi problem is also different from an issue with the internet connection itself.

    First, test with a network cable, then check the Wi-Fi where you’ll be joining the seminar.

  • Placing a wireless mesh node somewhere it barely gets a signal

    The extra node also needs to maintain a connection to the main router; the same walls could disrupt the link between them.

    Check the connection where you plan to place the node, and consider Ethernet backhaul if the wireless link remains weak.

    You may need equipment from a compatible product family.

  • Buying an access point as if it were a complete internet modem

    The Ubiquiti UniFi U6+ is an access point with a GbE connection and PoE power. Your existing internet service remains a separate part of the set-up.

    Before buying, map out the connection from your internet socket to your seminar computer, and check which connections and power supply you’ll need.

    Brands to consider

    TP-Link

    TP-Link describes the Deco X50 as a mesh system with optional Ethernet backhaul, and the Deco PX50 as a mesh system with G.hn powerline. These are different ways to connect Wi-Fi nodes.

    • According to TP-Link, powerline on the PX50 can reduce the effect of walls on the link between nodes.
    • This is a manufacturer claim, not a test in your home. According to TP-Link, the PX50 doesn’t form a powerline backhaul with the PX10, P7 or P9.

    FRITZ!

    The FRITZ!Repeater 3000 AX could supplement an existing router, particularly in a FRITZ!Box set-up.

    • FRITZ! lists two gigabit LAN ports and automatic transfer of Wi-Fi settings with a FRITZ!Box.
    • Don’t assume the automatic set-up described will work with every router from another brand.

    Ubiquiti

    According to Ubiquiti, the UniFi U6+ is a wired Wi-Fi access point for a set-up with a network connection near your workspace.

    • Ubiquiti lists a GbE connection, PoE power and management through UniFi Network.
    • Check the power and management set-up you’ll need; an access point on its own doesn’t replace your internet modem.

    ASUS

    ASUS describes Ethernet backhaul as an option for AiMesh when distance or obstacles weaken the wireless connection between the router and a node.

    • A wired connection between AiMesh nodes is worth considering if you can run a cable.
    • The general AiMesh guidance doesn’t confirm the port configuration of every individual ASUS model.

Joybuy products for a wired Wi-Fi set-up

These Joybuy products are suitable for a wired access point or mesh nodes with possible Ethernet backhaul. Check the connections and power supply required for your installation for each model.

Ubiquiti UniFi AP U7 Long-Range

Ubiquiti UniFi AP U7 Long-Range

An option if you want to position a wired access point close to your seminar workspace.

This access point doesn’t replace your existing router or internet service; use a compatible PoE+ power supply.

View at Joybuy
ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7, white

ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7, white

A mesh option if you want to extend your Wi-Fi coverage with multiple nodes and can run a wired connection between them.

The product name specifies dual-band (2.4 GHz / 5 GHz) and Wi-Fi 7 (802.11be).

View at Joybuy
TP-Link Deco X50, 3-pack, Wi-Fi 6

TP-Link Deco X50 (3-pack)

A mesh option if you want to use multiple Wi-Fi nodes and can run a cable between them.

The product name specifies dual-band (2.4 GHz / 5 GHz) and Wi-Fi 6 (802.11ax). TP-Link describes optional Ethernet backhaul for the Deco X50.

View at Joybuy
TP-Link Deco X50-PoE, 2-pack, Wi-Fi 6

TP-Link Deco X50-PoE (2-pack)

A mesh option if you want to position multiple nodes and can set up a wired connection between them.

The product name specifies PoE and Wi-Fi 6 (802.11ax); check which power supply and connections your set-up requires.

View at Joybuy
TP-Link Deco X50, 2-pack, Wi-Fi 6

TP-Link Deco X50 (2-pack)

A mesh option if you want to use two Wi-Fi nodes and can run an Ethernet cable between them.

The product name specifies dual-band (2.4 GHz / 5 GHz) and Wi-Fi 6 (802.11ax). TP-Link describes optional Ethernet backhaul for the Deco X50.

View at Joybuy

Frequently asked questions

If my seminars keep cutting out, should I immediately get faster internet or a new router?

No. First, test with a computer connected using a network cable, then compare the connection at your seminar workspace. The Consumers' Association points out that distance, walls and router placement can all affect Wi-Fi indoors.

How can I check whether the Deco PX50 is connected via powerline?

In the Deco app, check the satellite node to see whether PLC backhaul is active. According to TP-Link, the PX50 doesn’t form a powerline backhaul with the Deco PX10, P7 or P9.

Does the Wi-Fi speed on the box prove that HD video calls will work well?

No, that speed doesn’t show how the connection will perform at your seminar workspace. Zoom lists bandwidth requirements for video calls, so test with the seminar platform you use in the place where you plan to work.

What should I consider if I use my own router in the Netherlands?

ACM ConsuWijzer confirms that, in principle, you can choose your own router in the Netherlands, although conditions apply. According to the Dutch Digital Infrastructure Inspectorate, Wi-Fi radio equipment sold on the Dutch market must have the correct CE marking.

Does a manufacturer's warranty replace my statutory rights?

No, a manufacturer's or seller's warranty doesn’t replace your statutory rights in the Netherlands. According to ACM ConsuWijzer, the seller is responsible if a product used normally breaks sooner than you could reasonably expect; there isn’t simply a fixed two-year statutory warranty period for all routers.