First, check your upload speed using a network cable connected to your router: a Wi-Fi extender won’t make a slow internet connection faster. If the Wi-Fi is particularly weak in the room where you keep your photos, a wired access point can route around the thick wall if you’re able to run a cable. If not, you could consider powerline or a wireless repeater. Powerline depends on your electrical wiring, while a repeater needs to be placed somewhere the Wi-Fi signal is still strong enough.
Who is this useful for?
Album uploader who wants to find the cause first
You upload lots of photos and want to find out whether the delay is down to your internet connection or the Wi-Fi in the other room. The Consumentenbond recommends running a speed test over a network cable to assess your internet connection.
Homeowner who can run a network cable
You have a room behind thick walls and can install a wired access point there, so the Wi-Fi doesn’t have to pass through the wall to reach the room.
Homeowner without a practical cable route
You want Wi-Fi on the other side of the wall without running a network cable, and need to choose between a connection over your electrical wiring and a repeater placed where the Wi-Fi signal is strong enough.
What should you look for?
Start by checking your upload speed over a cable next to the router. Then decide which route to the room where you keep your photos is practical: a network cable, powerline or a repeater placed somewhere the Wi-Fi signal still reaches. The Consumentenbond recommends running a speed test on your home network over a network cable.
| What to consider |
What to look for when buying |
Who is this important for? |
| Is the upload speed itself the problem? |
Compare the wired speed next to the router with an upload test from the room where you keep your photos. |
If I first want to find out whether my internet connection is limiting uploads, I compare the two locations before buying extra Wi-Fi equipment. For around 29% of consumers, identifying the cause comes first. |
| A reliable connection beyond the wall |
Check whether the device supports access point mode or demonstrably compatible Ethernet backhaul, and whether you have the cable and port you need. |
If I can run a network cable to the room, I want a Wi-Fi access point there with a wired connection. This is the main priority for around 29% of consumers. |
| Wi-Fi without a network cable |
Check whether the powerline kit provides Wi-Fi, whether it works with your existing adapters and whether you can test the connection at the wall sockets you plan to use. |
If I can’t run a cable between the rooms, I want to try an alternative connection through the wall sockets. Around 24% of consumers prioritise this option. |
| Finding a spot for a wireless repeater |
Look for an intermediate spot with a strong enough Wi-Fi signal, and check which repeater or mesh features work with your router. |
If I still have Wi-Fi in an intermediate spot and don’t want to run a cable, wireless extension suits my needs. Around 18% of consumers prioritise this straightforward option. |
Common purchasing mistakes
-
Buying an extender when your wired upload speed is already slow
Extending your Wi-Fi won’t change the speed of your internet connection at the router.
First, compare a wired speed test next to the router with an upload test where you work.
-
Placing a repeater beyond the thickest wall
A repeater needs a sufficiently strong connection to the router. If the Wi-Fi already drops out where you place it, it can’t restore that connection.
Look for an intermediate spot with a signal, and use the device’s placement guide or signal indicator. If there’s no suitable spot, compare running a cable with using powerline.
-
Assuming an Ethernet port proves wired mesh compatibility
An Ethernet port alone doesn’t confirm that the mesh feature supports wired backhaul with your router. OneMesh and AiMesh have their own compatibility requirements.
Check the operating mode and compatibility of both the router and the Wi-Fi access point.
-
Assuming powerline works the same way from every wall socket
Electrical equipment and where you place the adapters can affect the connection.
Test the kit directly in the wall sockets you plan to use. Devolo recommends not plugging adapters into a multi-socket extension lead or an extension cable.
Brands to consider
TP-Link
The RE705X is an option for wireless extension or use as an access point via its gigabit Ethernet port.
- TP-Link says the RE705X has an access point mode.
- OneMesh requires a OneMesh router; the product specifications don’t prove how well it will upload in a home with thick walls.
ASUS
The RP-AX58 can be used as a repeater or access point. AiMesh is relevant if you have a compatible ASUS router.
- ASUS describes how to use the RP-AX58 with other routers, and as an AiMesh node with wired backhaul.
- AiMesh features and a wired AiMesh setup require a compatible ASUS router.
NETGEAR
The EAX15 is a wireless Wi-Fi 6 extender that extends coverage from an existing router.
- NETGEAR lists a gigabit Ethernet port and says you can keep your existing Wi-Fi name.
- A stated maximum wireless speed is a product specification, not a measured upload speed from the room where you keep your photos.
devolo
The Magic 2 WiFi 6 next Starter Kit combines powerline with Wi-Fi for rooms where walls make a wireless connection difficult.
- The manufacturer describes a kit with two adapters and Wi-Fi over your electrical wiring.
- Devolo warns that electrical equipment and plugging an adapter into a multi-socket extension lead can affect the connection. Test the kit in your home.
Joybuy product picks
The Joybuy picks below include wired mesh and access point options, as well as a powerline Wi-Fi kit for extending coverage to another room.
No image available
TP-Link Deco BE68 (2-pack)
A mesh kit with two units for Wi-Fi in multiple rooms, with both wired and wireless backhaul.
View at Joybuy
No image available
Ubiquiti UniFi AP U7 Long-Range
A wired access point for Wi-Fi beyond the wall. Installation requires a wired uplink and a compatible PoE+ power supply.
The specified power supply is PoE+ (802.3at). Wall or ceiling mounting is listed as an option.
View at Joybuy
No image available
ASUS ZenWiFi BD4 Wi-Fi 7 (2,4 GHz / 5 GHz)
A mesh Wi-Fi system listed as supporting wired backhaul. Check whether that connection suits your setup.
The product name lists Wi-Fi 7 (802.11be) and the 2,4 GHz and 5 GHz frequency bands.
View at Joybuy
No image available
TP-Link TL-WPA7517 KIT powerline starter kit
A powerline Wi-Fi kit that connects through your electrical wiring, without a network cable between rooms. Test the connection at the wall sockets you plan to use.
The kit has PLC, Wi-Fi, LAN and power indicators. Electrical equipment and placement can affect the powerline connection.
View at Joybuy
No image available
TP-Link Deco AX1800 Wi-Fi 6 (2-pack)
A mesh kit with two units that supports wired Ethernet backhaul between Deco units.
Each unit has three gigabit ports. The Deco app is listed for setup and positioning the additional unit.
View at Joybuy
Frequently asked questions
How can I tell whether an extender could help with uploading my photos?
First, run a test using a network cable next to the router, then compare it with the connection in the room where you keep your photos. If the wired connection itself is slow, look into your internet connection before buying a Wi-Fi access point. The Consumentenbond recommends a wired speed test for your home network.
Where should I place a wireless repeater?
Place it somewhere in between, where the router’s Wi-Fi signal is still strong, rather than automatically putting it in the room where you already have no reception. Use the placement guide or indicator on your chosen device. The Consumentenbond recommends placing a repeater where the signal is still strong enough.
Why doesn’t a powerline kit work equally well from every wall socket?
According to devolo, electrical appliances can interfere with the connection. Plug the adapters directly into the wall sockets you plan to use, then check the connection there.
Does wired mesh backhaul work with every router?
No. It depends on the operating mode supported and the compatibility of the router and Wi-Fi access point. Check the requirements for the device you choose. An Ethernet port alone doesn’t prove that the mesh feature you want will work with your router.
What should I look for in the CE marking on a Wi-Fi access point?
Before buying, check that the exact version on offer carries the correct CE marking. The Dutch Authority for Digital Infrastructure states that radio equipment must meet the applicable requirements, and that the manufacturer applies the CE marking when those requirements have been met.