Who is this advice for?

Student studying behind thick walls

You download study materials in a room where the router signal is already weak. The route to that room matters more than the advertised top speed; TP-Link and devolo explain how obstacles can affect a wireless connection.

Student without a cable route

You don’t want to run a long network cable, so you’re comparing a repeater placed where it can receive a signal with a suitable powerline kit. TP-Link and devolo describe powerline as a connection that runs through your electrical wiring.

Resident with several rooms with weak coverage

It’s not just your study space that has weak coverage; other rooms do too. You want to know whether several mesh nodes are suitable and how they connect to each other. Consumentenbond and Ziggo explain how to position and connect Wi-Fi nodes.

What should you look for when choosing?

Start by checking the signal in a possible spot before the thick walls. If there’s no usable signal there, look into an Ethernet connection or powerline. For several rooms, the connection between the Wi-Fi nodes also matters.

What to consider What should you look for? Who is this important for?
Connection beyond thick walls Check the signal before the walls and in a possible spot for the repeater; otherwise, consider Ethernet or powerline. I mainly want the connection to reach my study. Around 36% of consumers say this is their top priority when buying.
Positioning without a cable The repeater needs to receive a usable signal from the router where you place it. I don’t want to run a long cable, so I need a spot where a repeater can still receive the router’s signal. Around 29% of consumers prioritise being able to position a device without a cable.
Coverage in several rooms Check that the mesh nodes are compatible with your router and whether they can connect to each other wirelessly or by cable. I want to reach several rooms with weak coverage and find out how the Wi-Fi nodes connect to each other. Around 21% of consumers prioritise coverage in several rooms.
Purchase and management Check what’s included in the kit, which connections you need and whether any conditions apply to your provider’s equipment. I mainly want to know what equipment and management the solution requires. Around 14% of consumers say purchase and management are their top priority when buying.

Common pitfalls

  • Putting a repeater somewhere with no router signal

    A wireless repeater first needs to receive the existing signal. Thick walls can weaken that connection too.

    Before you buy, check whether there’s a spot between the router and your study with usable reception. If not, look into Ethernet or a suitable powerline kit.

  • Assuming the stated Wi-Fi or powerline speed is your guaranteed download speed

    Walls, positioning and, with powerline, your electrical wiring all affect the connection at home.

    Test the connection in your study with an actual download. If you’re using powerline, try different suitable wall sockets.

  • Assuming every mesh feature works with every router

    Manufacturers describe specific mesh features for use with compatible equipment. Basic Wi-Fi compatibility doesn’t mean all the extra features will be available.

    Check the full model names and the stated compatibility of your router and Wi-Fi node.

  • Choosing a provider’s Wi-Fi node without checking the terms of use

    KPN states that a rented SuperWifi node can only be used with KPN Internet.

    Before you choose, check whether the node is purchased or rented and which terms apply to your connection.

Brands to compare

TP-Link

Offers both repeaters and powerline products, giving you different options when thick walls interfere with your connection.

  • According to TP-Link, the RE705X has a gigabit port and supports OneMesh with a compatible router. It also has an access point mode.
  • As a wireless repeater, it still depends on receiving a usable signal. Powerline performance depends on your electrical wiring.

FRITZ!

The FRITZ!Repeater 1200 AX is a Wi-Fi 6 repeater with a gigabit LAN connection.

  • According to FRITZ!, the model can connect to a FRITZ!Box via LAN for mesh.
  • If you have a different router, check which features are available. The stated wireless speed isn’t a measured download speed in your study.

devolo

Offers repeaters and Magic powerline products to suit different placement options.

  • devolo describes its repeaters as a way to extend Wi-Fi on one floor, and powerline as a way to send the signal through your electrical wiring.
  • According to devolo, certain sockets, power supplies and dimmer switches can affect powerline performance.

KPN

A provider option with SuperWifi nodes and installation support for households with KPN equipment.

  • KPN offers installation support and an app for its Wi-Fi nodes.
  • According to KPN, a rented SuperWifi node can only be used with KPN Internet. Check that it’s suitable for your connection and whether the node is purchased or rented.

Ziggo

A provider option with SmartWifi pods for a compatible Ziggo SmartWifi network.

  • Ziggo says its SmartWifi pods 6 can connect to each other wirelessly or by cable. Each pod model has two LAN ports, supporting speeds of up to 1000 Mbit/s.
  • Whether they’ll work for you depends on your existing Ziggo setup; these features don’t tell you how well the connection will perform in your rooms.

Joybuy products

These products are suitable for wired mesh or access point setups, and powerline for Wi-Fi in your study.

ASUS ZenWiFi BD4, white, Wi-Fi 7, dual-band, two-pack

ASUS ZenWiFi BD4, Wi-Fi 7, dual-band, white, two-pack

Suitable for a mesh setup where the connection between nodes can run over a cable, rather than relying solely on a wireless signal passing through thick walls.

The product name specifies Wi-Fi 7 (802.11be), dual-band (2,4 GHz / 5 GHz) and a white two-unit set. The wired backhaul described requires an Ethernet connection between the nodes.

View at Joybuy
TP-Link TL-WPA7517 KIT Powerline Starter Kit

TP-Link TL-WPA7517 KIT Powerline Starter Kit

An option if you don’t want to run a long network cable and would rather use your electrical wiring to bring Wi-Fi to your study.

The product description lists a powerline starter kit that provides Wi-Fi through your existing electrical wiring. Actual performance depends on your home’s wiring.

View at Joybuy
TP-Link Deco X50, three-pack, Wi-Fi 6, dual-band, white

TP-Link Deco X50, three-pack, Wi-Fi 6, dual-band, white

Suitable for a mesh setup covering several rooms, as long as the nodes can connect well to each other.

The set contains three units. The product description lists three gigabit Ethernet ports per unit; check whether a wired connection is possible in the locations you need.

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N access point and Wi-Fi extender

Suitable for an access point setup if you can run an Ethernet cable to the location you need. In repeater mode, the device still needs to receive a usable signal from the router.

The product name specifies up to 300 Mbps, two aerials, WPS and Passive PoE. The stated speed isn’t a guaranteed download speed.

View at Joybuy
TP-Link Omada EAP613 access point with Power over Ethernet

TP-Link Omada EAP613 access point

Suitable for a wired access point setup if you can run an Ethernet cable to your study or another location you need.

The product name specifies 1775 Mbps and Power over Ethernet (PoE); this figure doesn’t guarantee your download speed at home.

View at Joybuy

Frequently asked questions

Where should you place a wireless repeater?

Place a wireless repeater between the router and the room with weak coverage, somewhere it can still receive a good signal from the router. Then check the connection in the room itself; a repeater can’t receive a usable signal in a dead zone.

Is 5 GHz always better behind a thick wall?

No. The Netherlands Authority for Digital Infrastructure states that 5 GHz may be less affected by congestion, but has a shorter range than 2,4 GHz. Compare both frequency bands in the places where you want to use them.

Does a powerline adapter need to be plugged into a wall socket?

devolo recommends plugging the adapter directly into a wall socket for the best performance, rather than into a multi-socket extension or extension lead. Nearby electrical appliances can cause interference; also follow the instructions for the kit you choose.

Do you need a permit or registration for Wi-Fi at home?

No. According to the Netherlands Authority for Digital Infrastructure, Wi-Fi uses frequencies that don’t require a permit, notification or registration, provided you comply with the applicable terms of use.

What should you know about product rules and warranties in the Netherlands?

Check that each radio device has the required CE marking. If a product is faulty, you can contact the seller about your statutory consumer rights. According to the Dutch Government, there is no fixed statutory warranty period in the Netherlands.