Viewers behind thick walls
You watch in a room where the connection from your current router or mesh points keeps dropping out. In that case, the network route to the room matters more than the highest speed printed on the box.
A more powerful router won’t automatically solve stuttering when watching a theatre recording through thick walls. What matters is the connection where you’re watching and the route it takes to get there. If you can run an Ethernet cable to the viewing room or a suitable spot, consider a wired Wi-Fi access point or mesh with Ethernet backhaul. Without a cable, wireless mesh and powerline mesh are possible alternatives. Once installed, check the connection at the playback device.
You watch in a room where the connection from your current router or mesh points keeps dropping out. In that case, the network route to the room matters more than the highest speed printed on the box.
You can run Ethernet to the viewing room or a nearby spot and want to connect a Wi-Fi access point or playback device there.
You want to reach several rooms without running cables and can position extra points where they can still connect to the network.
A good fit if: you can run an Ethernet cable to the viewing room or a suitable spot on the other side of the wall.
Bear in mind: you’ll need to run a cable and use a device that supports a wired setup.
A good fit if: you want to reach several rooms and running cables isn’t practical.
Bear in mind: each point still needs a usable connection to the previous one. Thick walls can affect that connection.
A good fit if: you want to try using your existing electrical wiring as an alternative route between points.
Bear in mind: you can’t know in advance how well it will work in your home. Check the connection where you watch after installation.
A good fit if: your current router is the main issue and the viewing spot is within reach without an extra point.
Bear in mind: a higher stated Wi-Fi speed alone doesn’t guarantee usable coverage through thick walls.
First, compare the connection next to your router with the one where you watch. The Consumers’ Association recommends considering a wired connection between network points if you have an Ethernet cable available.
| What to consider | What to look for when buying | Who is this important for? |
|---|---|---|
| Connection through thick walls | Check the connection at the playback device and between any Wi-Fi points. The stated maximum speed won’t tell you how it will perform in that situation. | If the Wi-Fi in my viewing room keeps dropping out, I want to know whether the connection will remain usable there. Around 36% of consumers put coverage through thick walls first. |
| Making use of a cable | Check whether there’s a route for a cable and whether the exact model supports Ethernet backhaul or use as an access point. | If I can run a cable to the viewing spot, I want to use it for the playback device or a Wi-Fi point. Around 29% of consumers prioritise a wired solution. |
| Expanding without a cable | Consider how many points you’ll need and whether you can place each one where it can still connect to the previous point. | If I want to reach several rooms without running cables, each extra point still needs its own network connection. Around 21% of consumers mainly want to expand their network without cables. |
| A simple setup | Check how many devices the setup requires, how to configure them and what support is available for security updates. | If I want to manage as few devices as possible, I first want to know whether one extra point will do. Around 14% of consumers prioritise simplicity and a minimal setup. |
Also check the requirements of the video service you actually use. Netflix, for example, recommends 5 Mbps for FHD streams and 15 Mbps for UHD streams. These are Netflix recommendations, not fixed requirements for every theatre recording.
The Wi-Fi version or stated speed doesn’t tell you how the connection will perform in your home through a wall. A different router may therefore fail to fix the dropouts where you watch.
Compare the connection next to the router with the one at the playback device, and consider the network route to the viewing room.
The extra point needs to receive data from the existing network. A spot where the signal already drops out won’t necessarily provide a good starting point.
Place the point where it can still connect to the previous one, then check the connection in the viewing room.
Powerline uses your electrical wiring as a network route, while models such as X50, X50-PoE and PX50 refer to different versions and connection routes.
Check the full model name, what’s included in the set and the connections, then test it in your home after installation.
The Deco X50 and Deco PX50 are mesh options with different networking features.
The FRITZ!Repeater 3000 AX is worth considering to extend an existing FRITZ!Box setup.
ASUS provides support and documentation for the ZenWiFi XD5 in the Netherlands.
NETGEAR documents wireless and wired connections between compatible Orbi routers and satellites.
This selection includes mesh sets for extending your network around the home and a powerline kit that uses your existing electrical wiring as a network route. Check which setup suits the cabling options and connection where you watch.
No image available
This mesh set suits anyone looking to reach several rooms and make use of a wired connection between network points.
Set of 2 units.
No image available
This mesh set is worth considering if you want to extend Wi-Fi to several rooms and connect a device to one of the units by cable.
Dual-band (2.4 GHz/5 GHz); Wi-Fi 5 (802.11ac).
No image available
This mesh set suits anyone looking to use several network points and run a cable between them.
Dual-band (2.4 GHz/5 GHz); Wi-Fi 7 (802.11be).
No image available
This powerline kit is worth considering if you want to try using your existing electrical wiring to extend the network to your viewing spot.
Starter kit for powerline adapters.
No image available
This mesh set suits anyone looking to extend Wi-Fi to another spot and use an Ethernet cable between network points.
Wi-Fi 6; set of 2 units.
Compare the connection close to your existing router with the one at the playback device through the wall. If the connection is poor mainly where you watch, first look at the network route to that spot. A higher Wi-Fi specification won’t automatically tell you how the connection will perform there.
Place it somewhere it can still connect to the previous point and reach the room you want to cover. Once it’s in place, check the connection where you watch.
It depends on the video service and picture quality. Netflix recommends 5 Mbps for FHD streams and 15 Mbps for UHD streams. These are Netflix recommendations, not general requirements for every theatre recording. Check your service’s requirements and the connection at the playback device.
In the Netherlands, statutory consumer rights apply in addition to any manufacturer’s warranty. ACM ConsuWijzer explains that the retailer is responsible for offering an appropriate solution if a product, when used normally, doesn’t perform as you could reasonably expect.
Not necessarily. Radio equipment sold on the Dutch market must meet the applicable European requirements and carry the correct CE marking. The Dutch Authority for Digital Infrastructure advises against using equipment without the correct marking and recommends contacting the retailer. A listing in an online shop alone doesn’t confirm that a specific item meets the requirements.