Who is this guide for?

Anyone who can run a cable to the screen

If you want a stable connection for your screen, or can connect an access point on the lounge side of the wall, this is for you. The Consumentenbond discusses cabling as a way to create a wired connection to the screen.

Anyone without a cable route to the lounge

If you need to position Wi-Fi nodes so they can still reach each other reliably despite the walls, this is for you. The Consumentenbond recommends minimising obstacles between Wi-Fi nodes.

Managers of a shared lounge

If you need to manage not only coverage but also the connection to your existing router and access for different users, this is for you. ACM ConsuWijzer discusses the option of choosing your own network equipment; check the settings for shared use on the system you choose.

What should you look for?

First, work out whether you can run a cable to the screen or to an access point on the lounge side of the wall. Then decide whether to connect the Wi-Fi nodes by cable or wirelessly, and finally check how to manage the network for shared use.

What to consider What to look for when buying Who is this most relevant to?
Connection on the other side of the wall Check whether the screen has an Ethernet port and whether you can run a cable to the screen or to an access point on that side. If I can run a cable, I don’t want the screen to rely on a wireless connection through the wall; that’s why around 42% of consumers prioritise a screen connection that can be wired.
Coverage without a cable route Position wireless Wi-Fi nodes where they can still reach each other reliably, with as few obstacles as possible, as the Consumentenbond advises. If I can’t run a cable to the lounge, I need to choose the nodes’ positions carefully; around 33% of consumers prioritise wireless coverage without a cable route.
Managing shared use Check whether the system works with your existing provider’s router and what settings are available for a guest network and updates. ACM ConsuWijzer explains that you can choose your own equipment; check the connection requirements for your situation. If several people use the network, I want to manage access and settings as well as the screen connection; around 25% of consumers prioritise this.

Common buying mistakes

  • Assuming an extra mesh node behind the wall will solve the problem

    The extra node still needs a good connection to another node. So a spot where the signal already drops out won’t automatically be suitable.

    Consider possible positions in advance, and look into Ethernet backhaul if you can run a cable between the nodes.

  • Buying a repeater as if it were a standalone modem router

    The FRITZ!Repeater 1200 AX is designed to extend an existing network and has one LAN port. Decide in advance whether you need that port to connect to the router or the screen.

    Check which router you already have and how you want to connect the screen.

    You’ll still need an existing router; additional ports or network equipment may be needed for more wired devices.

  • Assuming the manufacturer’s warranty covers all your rights

    A manufacturer’s warranty does not, on its own, determine your statutory rights against the seller.

    Keep your proof of purchase and remember your statutory rights if a product develops a fault. ACM ConsuWijzer explains that statutory rights exist alongside any seller’s warranty.

Relevant brands to consider

TP-Link

The Deco X50 is a mesh option for anyone looking to connect multiple Wi-Fi nodes, with the option of using Ethernet backhaul.

  • TP-Link Netherlands lists three gigabit ports per Deco X50 unit and optional Ethernet backhaul.
  • The stated coverage won’t tell you what connection you’ll get behind thick walls. The Deco X50 is a different version from the Deco X50-PoE.

ASUS

The ZenWiFi XD5 is a mesh option for anyone who can connect Wi-Fi nodes via Ethernet or wants to choose between different network modes.

  • ASUS describes Ethernet backhaul for the XD5 and a setup in which one unit connects to the modem router.
  • Check the version and connection you’re choosing. A stated wireless speed doesn’t tell you what you’ll get at your lounge screen.

FRITZ!

The FRITZ!Repeater 1200 AX is designed to extend an existing network, for example alongside a FRITZ!Box.

  • The manufacturer lists one gigabit LAN port and compatibility with a FRITZ!Box or other modem routers.
  • The repeater does not replace a modem router on its own. Check that the LAN port suits the connection you need.

Joybuy products for wired or mesh connections

These products are suitable for a wired access point or multiple Wi-Fi nodes. Before choosing, check that the connection, power supply and network mode are compatible with your existing setup.

Ubiquiti UniFi AP U7 Long-Range

Ubiquiti UniFi AP U7 Long-Range

A good fit for a wired access point setup if you can run Ethernet to the lounge.

Requires an Ethernet uplink and a compatible PoE+ power supply (802.3at); check whether your setup includes one.

Joybuy
ASUS ZenWiFi BT8 (2-pack), tri-band

ASUS ZenWiFi BT8 (2-pack), tri-band

A mesh kit to consider if you want to use multiple Wi-Fi nodes and a guest network; check how it connects to your existing router.

2-pack; tri-band (2.4 GHz/5 GHz/6 GHz); Wi-Fi 7 (802.11be).

Joybuy
ASUS ZenWiFi BD4, dual-band

ASUS ZenWiFi BD4, dual-band

A mesh option to consider if you’re looking into wired backhaul; check which connections and network mode are compatible with your router.

Dual-band (2.4 GHz/5 GHz); Wi-Fi 7 (802.11be).

Joybuy
TP-Link Deco X50-PoE (2-pack), dual-band

TP-Link Deco X50-PoE (2-pack), dual-band

A mesh kit to consider if PoE power suits your setup; check the power supply and cabling needed for your chosen configuration.

2-pack; dual-band (2.4 GHz/5 GHz); Wi-Fi 6 (802.11ax).

Joybuy
TP-Link Deco X50 (2-pack), dual-band

TP-Link Deco X50 (2-pack), dual-band

Worth considering if you’re looking for a mesh kit and may be able to connect the nodes by cable. TP-Link Netherlands lists optional Ethernet backhaul and three gigabit ports per unit.

2-pack; dual-band (2.4 GHz/5 GHz); Wi-Fi 6 (802.11ax).

Joybuy

Frequently asked questions

Do I need to replace my provider’s router?

No, not necessarily: you can connect a compatible system to your existing modem router. Check the access point mode and the recommended cabling for the model you choose; ACM ConsuWijzer also explains that you can choose your own network equipment.

Where should I put a wireless mesh node?

Place it where it can still get a good connection from the previous Wi-Fi node, not somewhere the signal has almost disappeared. The Consumentenbond recommends having as few obstacles as possible between nodes; check the connection in the places where you’re considering putting them.

What speed does one 4K stream need?

For one 4K stream, Netflix recommends a stable internet speed of at least 15 Mbps. This is a recommendation for that service, not a guarantee of the connection behind your walls; check the reception at the screen itself.

What applies in the Netherlands to warranties and wireless equipment?

ACM ConsuWijzer explains that statutory rights exist alongside any manufacturer’s warranty. For radio equipment placed on the market in the Netherlands, the Rijksinspectie Digitale Infrastructuur describes the applicable European requirements and CE marking. When buying, check the warranty terms and that the version actually being offered complies with the relevant requirements.