Who is this guide for?

Learner behind a thick wall

Your lesson device is somewhere with a weak router signal. First, see if there’s a midway point where an additional Wi-Fi point can still get a good connection. Walls and other obstacles can interfere with the signal, as the Consumentenbond explains.

Learner with a network cable

You can run an Ethernet cable to the lesson space and don’t want the connection between the router and the additional Wi-Fi point to rely on a wireless signal through the walls. Check whether your chosen model supports wired access point mode.

Learner without a cable route

Running an Ethernet cable isn’t practical, and you may not have a suitable spot for a repeater. You’re looking into whether a powerline kit can provide a usable connection through your home’s existing electrical wiring.

What should you look for when buying?

Wireless repeater

A good fit if: there’s a midway point where the repeater can still get a good Wi-Fi signal from the router.

Bear in mind: the wireless connection to the repeater is still affected by walls and other obstacles.

Wired access point

A good fit if: you can run an Ethernet connection to the lesson space and the wireless route through the wall is weak.

Bear in mind: running a cable and checking the wired operating mode both need a little extra attention.

Powerline with Wi-Fi

A good fit if: running a cable isn’t practical and there’s no suitable spot for a wireless repeater.

Bear in mind: the connection through your power sockets also depends on your home’s electrical wiring.

What to consider What should you check? Who is this important for?
Connection without a wireless hop Check whether Ethernet reaches the lesson space and whether the model can work as a wired access point. If I mainly want a wired route behind thick walls, I look at cable reach and the right operating mode; around 36% of consumers prioritise this need.
Coverage without a cable route Check whether the kit includes an adapter for the router and a Wi-Fi adapter for the lesson space; assess the connection in your home. If I can’t run a cable and don’t have a suitable spot for a repeater either, I look into powerline through the power sockets; around 29% of consumers are mainly looking for this kind of coverage solution.
A suitable spot for a repeater Check the connection indicator or app at the intended midway point, and bear obstacles in mind. If I want to extend my network without a cable, the repeater itself still needs to get a good signal from the router; around 21% of consumers prioritise this simple way to extend their network.
Suitable features and equipment Check the exact model and hardware version, router support, and which Wi-Fi features your lesson devices support. If I want to keep using my current router and lesson devices, I compare compatibility first; around 14% of consumers prioritise compatibility with their existing equipment.

Common buying mistakes

  • Putting the repeater in the room with the weakest coverage

    A repeater needs to get a usable signal from the router itself. It won’t automatically solve the problem if you put it somewhere the signal has already dropped out.

    Look for a midway point with as few obstacles as possible, then check the connection indicator or app there.

  • Assuming the maximum speed is the speed you’ll get during a lesson

    With powerline, the actual connection also depends on electrical interference and the quality of your home’s wiring. So a stated maximum speed doesn’t guarantee streaming speeds in your home.

    Assess the connection using the sockets where the adapters will actually be plugged in.

  • Assuming every repeater automatically creates a mesh with your router

    Mesh features can depend on the combination of devices. For example, the TP-Link datasheet for the RE605X(EU) 3.0 specifies OneMesh when used with a OneMesh router.

    Check mesh support for both exact models and versions before relying on it.

Brands to compare by model

FRITZ!

The FRITZ!Repeater 1200 AX is worth considering if you want to connect an additional Wi-Fi point via LAN.

  • The official manual describes connecting via LAN as an access point with a router from another manufacturer.
  • Check your router’s mesh features separately; this model’s specifications don’t tell you anything about the performance of other FRITZ! products.

devolo

The Magic 2 WiFi next Starter Kit is a powerline option for a lesson space without a practical Ethernet cable route or a suitable wireless midway point.

  • According to devolo, the Starter Kit contains two adapters and can be expanded with Magic adapters.
  • Devolo says the kit can’t be expanded with dLAN adapters. Its maximum transfer rate doesn’t guarantee performance over your home’s electrical wiring.

TP-Link

The RE605X(EU) 3.0 is an example of a standalone repeater with access point mode, giving you the choice of wireless coverage extension or using an available cable.

  • The TP-Link datasheet lists access point mode and OneMesh when used with a OneMesh router.
  • Check the hardware version and router compatibility of the model on offer; product specifications aren’t an independent performance test.

Joybuy product picks

These product picks cover powerline with Wi-Fi, a wireless repeater and a wired access point. First, work out which connection route is practical in your home.

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT

A powerline Wi-Fi kit to consider if a long Ethernet cable isn’t practical and you want to extend your network using your existing electrical wiring.

The product information lists a Type E plug and Wi-Fi and PLC indicators. How well it works also depends on your home’s electrical wiring, so assess the connection at the intended sockets.

Check the CE marking and EU Declaration of Conformity for the item on offer.

View product at Joybuy
TP-Link TL-WA850RE 300 Mbps Universal Wi-Fi range extender

TP-Link TL-WA850RE 300 Mbps Universal

A wireless repeater to consider if you can find a midway point where it can still get a good connection from the router.

The product information lists a stated maximum speed of 300 Mbps and an Ethernet port. A repeater can’t fix a weak incoming signal somewhere the coverage has already dropped out.

Check the CE marking and EU Declaration of Conformity for the item on offer.

View product at Joybuy
TP-Link Omada EAP653 Wi-Fi 6 access point

TP-Link Omada EAP653

A wired access point to consider if you can run an Ethernet connection to the lesson space and want to put an additional Wi-Fi point there.

The product information lists Wi-Fi 6, an Ethernet port, PoE support and WPA3. This option requires an Ethernet connection to the lesson space.

Check the CE marking and EU Declaration of Conformity for the item on offer.

View product at Joybuy

Frequently asked questions

Where should you place a wireless Wi-Fi booster?

Put the booster at a midway point where it can still connect well to the router, with as few obstacles as possible. Check the placement indicator or app, and don’t automatically put it in the room where the signal has already dropped out.

Will a wired Wi-Fi point work with a router from another brand?

It depends on the model and the operating mode you need. The official manual for the FRITZ!Repeater 1200 AX describes a LAN connection to a router from another manufacturer; check the instructions for the exact device you’re considering.

What costs and support should I consider if something goes wrong?

For a wired solution, allow for the cabling you’ll need, and check whether a powerline kit includes the required adapters. According to the Authority for Consumers and Markets (Autoriteit Consument & Markt), the seller is responsible for the legal guarantee if a product is faulty; this is separate from any commercial manufacturer’s warranty.

What product rules apply to Wi-Fi equipment in the Netherlands?

Wi-Fi radio equipment placed on the market in the Netherlands must meet the relevant European product requirements. According to the Dutch government, the manufacturer must apply a CE marking and draw up an EU Declaration of Conformity if the product complies. Check this documentation for the specific item you’re considering.