People streaming lessons behind thick walls
Your lesson spot is outside the range of a reliable Wi-Fi signal. You want to find out whether an extra access point will do the job, rather than automatically buying a new router.
A new router isn’t automatically the answer: first check whether the internet connection is dropping or whether it’s just the Wi-Fi at your lesson spot behind the thick walls. If the main issue is the connection between rooms, choose a Wi-Fi access point with Ethernet backhaul if you have a working cable route. Without a cable, you could consider powerline mesh if the devices you choose can work together, or place wireless mesh points where the connection to the main unit is still usable. Manufacturer claims can’t predict how the connection will perform in your home.
Your lesson spot is outside the range of a reliable Wi-Fi signal. You want to find out whether an extra access point will do the job, rather than automatically buying a new router.
You can run a network cable to your lesson spot or a nearby Wi-Fi access point, and don’t want the connection between points to depend on the walls.
You can’t run an Ethernet cable, so you’re comparing wireless mesh with a system that uses your home’s electrical wiring to connect the points.
First compare the connection at your lesson spot with the one near your router. The available cable route and the position of an extra point will then largely determine which solution is worth looking into.
Choose this when: you’re not yet sure whether the cause is your internet connection, settings or Wi-Fi range. The Consumers’ Association advises that a new router or extender isn’t always necessary.
The trade-off: changing the position or settings could save you from buying anything, but it may not solve a persistently weak signal behind walls.
Choose this when: you don’t want to or can’t run a cable, and you can place an extra point somewhere it can still connect to the main unit.
The trade-off: the connection between points still depends on the walls and where you place them. Don’t put a point somewhere it can barely receive a signal itself.
Choose this when: there’s a working Ethernet route to or near your lesson spot. ASUS and TP-Link describe wired connections between mesh points for their respective systems.
The trade-off: you’ll need a cable route. With a PoE model, the power supply must also meet the stated standard.
Choose this when: running Ethernet isn’t practical and you want to see whether the points can connect through your electrical wiring. TP-Link describes G.hn powerline for the Deco PX50.
The trade-off: performance depends on the equipment you choose and your electrical installation. A standalone adapter won’t automatically form one compatible Deco system.
| Consideration | What to check | Who is it important to? |
|---|---|---|
| Usable range at your lesson spot | Compare Wi-Fi at your lesson spot with the signal near your router, and work out where an extra point could still connect. | If I need a connection during an online lesson in a room behind thick walls, I want to know whether that specific spot is the problem. Around 36% of consumers in this group prioritise range at their lesson spot. |
| Wired connection | Check the Ethernet route and connections. If you’re using PoE, also check that the power supply supports the required standard. | If there’s already a cable running to my lesson spot, I want to use it to connect the Wi-Fi points. Around 29% of consumers make an available Ethernet route their first requirement. |
| Extending your network without Ethernet | Check the connection at the intended sockets and make sure the powerline equipment you choose is compatible. | If I can’t run a cable, I want to know whether my chosen points can connect through the mains. Around 21% of this group don’t want to or can’t use an Ethernet route. |
| Cause of the problem and number of points needed | Test your existing connection and settings first, then compare how many points you’ll need and what power supply the set-up requires. | If I’m not yet sure what’s causing the problem, I want to avoid buying equipment that won’t fix it. Around 14% of consumers prioritise diagnosing the issue and avoiding unnecessary purchases. |
A high speed rating alone doesn’t tell you whether the Wi-Fi at your lesson spot behind the walls will be good enough. The cause could also be your settings or internet connection.
Compare the connection in different places and find out where the problem lies before replacing your router.
The extra point also needs a usable connection to your existing network so that it can extend the signal.
Check the connection where you plan to put it. If the connection between points is weak, consider a suitable Ethernet or powerline backhaul.
TP-Link states that standalone powerline adapters don’t provide the intended Deco powerline backhaul when used with Deco products.
Before adding to your set-up, check the exact models and the compatibility information provided by the manufacturer.
If your equipment isn’t compatible, you may still need a different adapter or mesh system.
For the Deco X50-PoE, TP-Link specifies IEEE 802.3at or 802.3bt for PoE power, not just 802.3af. The statutory guarantee is also not simply the same as the manufacturer’s warranty period.
Check the power specifications for the exact version and contact the seller if there’s a fault. The ACM ConsuWijzer explains that the statutory guarantee applies alongside any manufacturer’s or seller’s warranty.
PoE may also require a compatible switch, so check that it suits your set-up.
The Deco range includes systems with different ways of connecting mesh points.
The ZenWiFi XD5 is a mesh option that can use an available Ethernet route.
The FRITZ!Repeater 1200 AX is designed to extend an existing network.
The Orbi 370 range is a dual-band mesh system available with different numbers of points.
This selection includes mesh systems, a Wi-Fi access point and a powerline Wi-Fi kit for extending your home network. Check that the connection, power supply and cabling required for each version suit your lesson spot.
No image available
Suitable if you want Wi-Fi in several places and the option of connecting mesh points by cable or wirelessly.
The product description lists three WAN/LAN ports per device, including 10 Gbps and 2.5 Gbps.
The description mentions mesh and both wired and wireless backhaul. Check which connection suits your set-up.
No image available
This access point is suitable if you want to extend your Wi-Fi and can connect the device via Ethernet.
The product information lists Wi-Fi 7, a 2.5-GbE uplink and PoE+.
The description mentions wireless mesh and management via the UniFi Network platform. Check first that the power supply and management features suit your network.
No image available
Suitable if you want to use mesh points at home and have the option of wired backhaul.
The product information lists dual-band Wi-Fi 7 (802.11be), MLO and wired backhaul.
Check that the available cable route and your preferred network set-up are suitable for this version.
No image available
Suitable if you want to extend your Wi-Fi without running an Ethernet cable to the extra location, provided the connection works through your home’s existing electrical wiring.
The product information lists IEEE 1901 and a Type E plug.
Check the connection at the sockets you plan to use. The product name alone doesn’t guarantee it will work in your home.
No image available
Suitable if you want to extend your Wi-Fi to more than one location and are looking for a mesh system with two points.
The product title lists Wi-Fi 6; the product description mentions automatic mesh connections and wired Ethernet backhaul.
The described installation and management use the Deco app. If you want to use wired backhaul, check that you have a suitable Ethernet route too.
Not necessarily: first find out where the connection is dropping. You can also use an extra Wi-Fi access point with your existing equipment. According to the ACM, your provider can’t insist that you use a particular make or model of modem or router, but do check the requirements for connecting to your network.
Place it somewhere it can still get a usable connection to your existing network. Then check the connection at your lesson spot. Simply putting it where reception is already poor won’t solve the problem by itself.
No, not according to the PoE specifications TP-Link lists for this model: PoE power requires IEEE 802.3at or 802.3bt, not just 802.3af. TP-Link also lists power via the DC adapter. Check which power option and, if needed, which switch will suit your set-up.
In the Netherlands, the statutory guarantee applies alongside any manufacturer’s or seller’s warranty: the product must meet what you could reasonably expect from it. According to ACM ConsuWijzer, the seller is responsible for providing an appropriate solution for a fault covered by that guarantee. It’s not accurate to describe the statutory guarantee as having a fixed, general two-year end date.
Radio equipment sold on the Dutch market must meet the applicable European requirements and carry the CE marking. This is a requirement for placing products on the market, but it doesn’t by itself confirm that a particular model on offer meets those requirements. Check the information for the exact version.