Group worker behind thick walls
Wants to stay connected in a separate room during weekend group work sessions. First work out how the signal can reach the room, then look at the speed class.
Start with the connection to your project room: if you can run Ethernet there, consider a wired access point. Without a cable, mesh depends on a good connection between the nodes. A faster single router won’t automatically solve a weak signal through thick walls, so also consider how many devices will be connected at once, guest access and how the system connects to your modem.
Wants to stay connected in a separate room during weekend group work sessions. First work out how the signal can reach the room, then look at the speed class.
Connects participants’ laptops and phones at the same time and wants to check whether the setup offers enough connection options and separate guest access.
Can’t easily run Ethernet to the workspace, so needs to assess where wireless mesh nodes could go, or whether powerline will work with the home’s electrical wiring.
Choose this when: the project room already has reasonable coverage and you may be able to move or adjust the router.
Trade-off: you’ll add very little equipment, but moving or adjusting the router won’t automatically carry the signal through a thick wall. The Dutch Authority for Digital Infrastructure (RDI) notes that 5 GHz has a shorter range than 2.4 GHz.
Choose this when: you can run a network cable to the project room and a wireless connection between nodes would otherwise have to pass through the wall.
Trade-off: you’ll need cables and, sometimes, separate power or PoE equipment. ASUS describes Ethernet backhaul for the ZenWiFi XD5; Ubiquiti describes the U6+ as a PoE access point, not a standalone replacement for a modem or router.
Choose this when: running a cable isn’t practical and you can place an intermediate node where it still gets a good connection to the main unit.
Trade-off: a node in a dead zone still needs to connect to the network. The Consumers’ Association advises placing Wi-Fi nodes with as few obstacles between them as possible.
Choose this when: Ethernet isn’t an option, the wall makes wireless backhaul difficult and the chosen sockets can connect over your home’s electrical wiring.
Trade-off: the connection depends on your electrical wiring. TP-Link warns that actual powerline performance may differ from the rated speed, so test the sockets where you plan to use the adapters.
| Consideration | What to check | Who this matters to |
|---|---|---|
| Coverage beyond the wall | See where an intermediate node could go and whether Ethernet can be run to the project room. | If I want to stay connected in a separate workspace, I’ll first look at the route between the router and that spot. Around 36% of consumers say coverage behind thick walls is their top priority. |
| Several devices at once | Check the Wi-Fi generation and Ethernet ports; don’t assume a stated combined speed is guaranteed for each participant. | If several participants are using laptops and phones at the same time, I want to know what connections and features the exact model offers. Around 29% of consumers prioritise simultaneous use. |
| Practical installation | Check cable and socket routes, the connection to your modem, and whether the required PoE power supply is available. | If running cables to the workspace is difficult, I want a setup that’s practical at home. Around 21% of consumers say ease of installation is their top buying priority. |
| Guest access and management | Check whether the exact model offers a guest network, how access settings work and how updates are made available. | If participants bring their own devices, I want to be able to manage guest access and keep the router under control. Around 14% of consumers prioritise guest access and management. |
For wireless equipment, also check that the version being sold carries the CE marking and set the device to the correct country setting for the Netherlands. The RDI outlines the applicable Wi-Fi frequencies and conditions of use.
A stated speed doesn’t tell you whether the connection can get through a thick wall and cover the distance to the project room.
First, look at placement and the connection between the router and any additional nodes. Compare speed ratings only after that.
The extra node also needs a usable connection to the network.
Try an intermediate position where the node still receives a signal. If the connection is still too weak there, see whether wired backhaul is an option.
TP-Link distinguishes between the rated powerline speed and actual throughput; your electrical wiring can affect the connection.
Test the connection at the sockets you intend to use before relying on powerline.
The Deco range includes mesh options for different connection setups, including models with PoE or powerline.
The ZenWiFi XD5 is a mesh option if you can position several nodes and, if needed, connect them using Ethernet.
The FRITZ!Box 4060 is a standalone router that connects behind a modem and can be expanded with compatible FRITZ! mesh nodes.
The U6+ is worth considering if you want to position a wired access point by the project room and can configure the network yourself.
These Joybuy products are mesh systems with multiple Wi-Fi nodes. Check that the backhaul and connections listed for each model suit your home.
No image available
A mesh option to consider if you need wired backhaul and guest access.
The product description lists Wi-Fi 7, a guest network and two 2.5-Gbit/s Ethernet ports.
No image available
A mesh system to consider if you want Ethernet backhaul and a separate guest network.
The product description lists Wi-Fi 6, Ethernet backhaul and support for several devices at once.
No image available
A three-node mesh system to consider if you want to connect several areas of your home.
The product description lists Wi-Fi 6 and optional Ethernet backhaul.
No image available
A mesh option to consider if you want three nodes, each with Ethernet ports.
The product description lists tri-band on 2.4, 5 and 6 GHz, guest access and Ethernet ports on each unit.
No image available
A mesh system to consider if you can position the nodes using a suitable wired PoE setup.
The product description lists Wi-Fi 6, guest access and PoE support. PoE requires suitable PoE equipment and network cables.
Not necessarily. First, check the position and settings of your current router and whether you can add a Wi-Fi node. The Netherlands Authority for Consumers and Markets (ACM) explains that you can choose your own modem or router in the Netherlands; check which connection settings your provider requires.
Don’t put the node where the signal has already dropped out. The Consumers’ Association recommends keeping obstacles between Wi-Fi nodes to a minimum. Try an intermediate position, then check the connection in your workspace.
Test the connection between the sockets you plan to use. TP-Link recommends plugging its powerline equipment directly into wall sockets and warns that extension leads and the electrical environment can affect performance. The stated powerline speed isn’t a measure of the throughput in your home.
Check how firmware updates will be made available for the exact model, and factor in the energy use of additional nodes. The Consumers’ Association includes energy consumption in its tests.
You don’t need a licence for home Wi-Fi as long as you follow the rules for the designated frequencies and conditions of use. The RDI highlights the importance of selecting the correct country setting; also check that the version being sold carries the CE marking.