Student behind thick walls
You attend a live lecture in a room where your current router gives you a weak signal. The Consumers’ Association lists walls and other obstacles as possible sources of Wi-Fi interference.
First, check that your internet connection is working properly, then try moving your existing router to a better spot. As the Consumers’ Association explains, walls and other obstacles can weaken the Wi-Fi signal. If the connection is still weak where you attend your lecture, a wired access point or mesh system with Ethernet backhaul could be a good fit if you have a suitable cable route. Without a cable, a wireless mesh system depends on placing the extra node somewhere it can still receive a usable signal.
You attend a live lecture in a room where your current router gives you a weak signal. The Consumers’ Association lists walls and other obstacles as possible sources of Wi-Fi interference.
You can run a network cable to your study area and want the connection between Wi-Fi nodes to avoid relying on a wireless signal passing through the walls. ASUS describes Ethernet backhaul for the ZenWiFi XD5.
You can’t run a cable and need to find a spot for a wireless Wi-Fi node that still gets a good connection to the previous node. The Consumers’ Association recommends considering the connection between the nodes and any obstacles.
Choose this if: you can move the router to a more central or higher position, where it may give you better coverage for your lecture.
Bear in mind: moving it won’t always help if the walls continue to weaken the signal; you may need a longer cable.
Choose this if: you can run a network cable close to where you attend your lecture and connect an extra Wi-Fi transmitter there.
Bear in mind: cable installation, available ports and the correct connection mode.
Choose this if: you can’t run a cable but have somewhere to place the extra node where it can get a good signal from the previous one.
Bear in mind: placing a node where the Wi-Fi signal has almost disappeared won’t automatically give it a usable connection.
Choose this if: your current router isn’t performing well enough and a single transmitter in a better position can reach where you attend your lecture.
Bear in mind: a newer Wi-Fi standard or advertised speed doesn’t prove that the signal will pass through your walls.
| What to consider | What should you check? | Who is this important to? |
|---|---|---|
| Coverage where you attend your lecture | Check the connection in the room itself and where an extra Wi-Fi node could go. | If I’m attending a live lecture behind thick walls, I want usable Wi-Fi where I’m sitting. Around 40% of consumers prioritise coverage in the room where they attend their lecture. |
| Connection between nodes | Check whether Ethernet backhaul and the connection mode you want are supported. | If I can run a cable to my study area, I don’t want the connection between nodes to rely on a wireless signal passing through walls. Around 30% of consumers prioritise a wired connection between Wi-Fi nodes. |
| Installation without a cable | Find a spot where the extra node can still receive a strong enough signal from the previous one. | If I can’t run a network cable, I want to place a wireless node somewhere it can still connect to the previous one. Around 20% of consumers prioritise installation without a cable. |
| Cause of the problem | Compare a wired connection with Wi-Fi where you attend your lecture and, if possible, try moving the router. | Before buying equipment, I want to know whether the internet connection itself is unreliable or whether it’s just the Wi-Fi in the room. Around 10% of consumers mainly want to avoid an unnecessary purchase. |
Distance and obstacles can weaken Wi-Fi. The Wi-Fi version alone doesn’t determine how good the connection will be where you attend your lecture.
Check the connection where you attend the lecture, then see whether you need to move the transmitter or add an extra node.
You may still need an extra Wi-Fi node or a cable.
The mesh node also needs a usable connection to the previous one, so placing it behind the same obstacles could still cause problems.
Choose an intermediate spot with few obstacles, or find out whether Ethernet backhaul is an option.
A problem with your provider’s connection and a problem with your home Wi-Fi don’t necessarily need the same solution.
First, compare the connection using a network cable with the experience where you attend your lecture.
A more expensive package means ongoing costs, but it won’t automatically fix a local Wi-Fi problem.
The Deco X50 is a Wi-Fi 6 mesh option with Ethernet ports, worth comparing if you want to use several Wi-Fi nodes.
The ZenWiFi XD5 is a mesh option if you may want to connect the nodes using a cable.
The Mesh Set 1600 is an option for extending your network while keeping your existing router or modem.
These Joybuy products are TP-Link Deco mesh systems with two or three nodes. They’re designed for a set-up with extra Wi-Fi nodes, but correct positioning and a usable connection between nodes are still important. For the specific version, check the applicable requirements and required CE marking; a retailer’s listing alone doesn’t prove compliance.
Image unavailable
A mesh system with three nodes for a set-up where you need Wi-Fi in several places. If you’re using it wirelessly, each node needs to be able to get a good signal from the previous one.
Dual-band Wi-Fi 6 (2.4 and 5 GHz); three gigabit Ethernet ports per unit; Ethernet backhaul option.
Image unavailable
A mesh system with two nodes for a set-up where you want to install the nodes using cables. Check beforehand that the connection method is suitable for your home.
Dual-band Wi-Fi 6 (2.4 and 5 GHz); PoE support; two Ethernet ports per unit.
Image unavailable
A set of three mesh nodes to extend Wi-Fi to several places around your home. If you’re positioning them wirelessly, they still need a usable connection to each other.
Tri-band 2.4, 5 and 6 GHz; Wi-Fi 6E (802.11ax); three Ethernet ports per unit.
Image unavailable
A mesh system with three nodes for Wi-Fi in different parts of your home. Decide where the nodes can go and whether they’ll be able to connect to each other wirelessly from those positions.
Tri-band Wi-Fi on 2.4, 5 and 6 GHz; Wi-Fi 6E (802.11ax); Ethernet ports per unit.
Image unavailable
A mesh system with three nodes for anyone who wants Wi-Fi in several places and can install the nodes using cables. Check that the connection method suits your needs.
Dual-band Wi-Fi 6 (2.4 and 5 GHz); PoE support; two Ethernet ports per unit.
Compare the connection using a network cable with the experience where you attend your lecture. A Wi-Fi test alone can’t tell you whether the problem is with your internet connection or your home Wi-Fi.
Place it somewhere the previous node can still reach it well, with as few obstacles as possible. Don’t put it only where the signal has already almost disappeared.
No, not necessarily. The ACM confirms that in the Netherlands you’re generally allowed to choose your own equipment, provided it meets the applicable network and safety requirements. You can also keep your provider’s existing equipment and connect a suitable Wi-Fi extender; check the connection instructions first.
Radio equipment placed on the market must meet the applicable European requirements and carry the required CE marking. The Dutch Authority for Digital Infrastructure says that, since 1 August 2025, stricter requirements covering areas such as digital security have applied to wireless devices placed on the European market from that date. Check the specific version; the CE marking alone says nothing about Wi-Fi coverage through walls.