Which solution is right for you?

For reading behind a thick wall

You download magazines on a tablet or laptop in a spot with a weak router signal. The Consumers’ Association recommends placing a repeater at a midway point where the signal is still usable.

If you have an Ethernet cable available

You can run a cable to your reading spot and want to provide Wi-Fi there without relying on a wireless signal passing through the wall. TP-Link and FRITZ! describe models with an access point or LAN bridge mode.

If running a cable isn’t an option

You can’t run an Ethernet cable and want to know whether your existing electrical wiring can provide a connection to your reading spot. devolo describes powerline as a way to transmit data over your home’s electrical wiring.

What should you consider when choosing?

Wireless repeater

Choose this option: if there’s a spot before the thick wall where the repeater can get a good signal from your router.

Bear in mind: obstacles can still affect the wireless connection back to your router.

Access point or mesh point with Ethernet

Choose this option: if you can run a network cable to the other side of the wall.

Bear in mind: you’ll need a cable, and should check whether the exact model has an access point or LAN bridge mode.

Powerline Wi-Fi

Choose this option: if you don’t have an Ethernet cable and have suitable sockets near your router and reading spot.

Bear in mind: performance can vary from one socket to another; devolo also notes that electrical appliances may cause interference.

What to consider What should you look for? Who is this important for?
Signal at your reading spot Check whether the router signal is still usable at a midway point. If the connection is weak, also consider Ethernet or powerline. If you mainly want to read behind the thick wall, you’ll want to know whether the Wi-Fi point itself can stay connected to the router. Around 42% of consumers prioritise signal at their reading spot.
Download speed Consider the whole connection to your tablet or laptop and, where available, compare measurements in different spots rather than relying only on the claimed maximum Wi-Fi speed. If you want to download magazines quickly, what matters is the connection where you read. Around 25% of consumers give download speed in that spot the highest priority.
Installation in your home Check whether you can use Ethernet or have suitable sockets, and test powerline in the places where you plan to use it. If cables or sockets determine what you can connect, you’ll want an option that suits your home. Around 17% of consumers prioritise an installation that’s practical to set up.
Complete solution Compare the points, adapters and any cables you’ll need; include the stated energy consumption if it’s available. If you don’t want to buy more equipment than necessary, consider the complete solution rather than just the Wi-Fi point. Around 16% of consumers focus mainly on keeping the total cost down.

Common buying mistakes

  • Placing a repeater where the router signal barely reaches

    The repeater needs a usable connection to the router. If you place it behind the wall, where the signal has already dropped out, that connection may remain the weak link.

    First, try a midway spot. If the wireless connection is still weak there, look into using Ethernet or powerline.

  • Confusing maximum Wi-Fi speed with your download speed

    The claimed Wi-Fi speed alone doesn’t tell you how quickly a magazine will download where you read. The Consumers’ Association tests Wi-Fi extenders in different locations and at different distances.

    Compare the whole connection and, where available, look at measurements that reflect where you use your tablet or laptop.

  • Assuming powerline works the same way in every socket

    According to devolo, some sockets may provide slower data transfer, and electrical appliances can affect the connection.

    Test the adapters in the sockets you plan to use and check the connection at your reading spot.

  • Applying a test result for a different pack size

    For the TP-Link Deco PX50 2-pack, the Consumers’ Association notes that the displayed test result is based on the 3-pack.

    Check that the version tested is the same as the set you’re considering.

Brands to consider

TP-Link

TP-Link offers standalone repeaters and Deco mesh systems, among other products. According to the manufacturer, the Deco PX50 combines mesh Wi-Fi with powerline between the points.

  • According to TP-Link, the RE705X has an access point mode via Ethernet.
  • Check that your router supports OneMesh. The quoted speeds and coverage aren’t measured performance figures for your home.

FRITZ!

FRITZ! describes a LAN bridge for the FRITZ!Repeater 1200 AX, including when used with a router from another manufacturer.

  • An access point connected via LAN is an option if you can run a network cable to the router.
  • You’ll need a network cable for this wired option.

devolo

devolo describes Magic powerline adapters that transmit data over your home’s electrical wiring. Some models provide Wi-Fi at the second socket.

  • Powerline Wi-Fi provides a way to reach a room further away without running a new Ethernet cable.
  • devolo warns that some sockets may provide slower data transfer and that electrical appliances can cause interference. Check compatibility when adding to an existing Magic or dLAN set.

ASUS

ASUS describes the RP-AX58 as a repeater that can also work as an access point.

  • Access point mode offers a wired way to provide Wi-Fi in another spot.
  • AiMesh requires an AiMesh-compatible router. ASUS notes that Wi-Fi 6 features require compatible client devices and that 160 MHz availability may vary by region.

Joybuy products

This selection includes mesh Wi-Fi systems with multiple points and a powerline Wi-Fi starter kit. Check what type of connection each model needs between the router and the additional Wi-Fi points.

ASUS ZenWiFi BT8 (2-Pack) Tri-Band Wi-Fi 7

ASUS ZenWiFi BT8 (2-Pack) Tri-Band Wi-Fi 7

A two-point mesh Wi-Fi system for extending Wi-Fi around your home; the product description mentions AiMesh integration.

Tri-band: 2.4 GHz, 5 GHz and 6 GHz. According to the product description, the main unit connects to the modem via Ethernet.

View at Joybuy
ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7

ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7

A mesh Wi-Fi system with a wired connection option for homes where you can use Ethernet between the mesh points.

Dual-band: 2.4 GHz and 5 GHz. The stated wired backhaul option requires an Ethernet connection between the points.

View at Joybuy
TP-LINK TL-WPA7517 KIT powerline Wi-Fi starter kit

TP-LINK TL-WPA7517 KIT Powerline Adapter Starter Kit

A powerline Wi-Fi starter kit for anyone looking to try extending their network over existing electrical wiring.

The product description mentions a Type E plug and status lights for PLC and Wi-Fi, among other things. Check the connection in the sockets you plan to use.

View at Joybuy
TP-Link Deco X20 AX1800 Wi-Fi 6 mesh system (2-Pack)

TP-Link Deco X20 AX1800 Wi-Fi 6 Mesh System (2-Pack)

A two-point mesh Wi-Fi system for extending Wi-Fi around your home.

The product description mentions an Ethernet backhaul option, which requires an Ethernet connection between the Deco points.

View at Joybuy
TP-Link Deco X50 (3-Pack) Dual-Band Wi-Fi 6

TP-Link Deco X50 (3-Pack) Dual-Band Wi-Fi 6

A three-point mesh Wi-Fi system for extending Wi-Fi to multiple areas of your home.

Dual-band: 2.4 GHz and 5 GHz. The product description mentions Gigabit Ethernet ports.

View at Joybuy

Frequently asked questions

Where should I place a wireless Wi-Fi extender?

Place the extender at a midway point where it can still get a good signal from the router, rather than behind the wall where the signal drops out. The Consumers’ Association recommends checking the connection where you download your magazines.

Can a repeater provide Wi-Fi behind the wall using an Ethernet cable?

Yes, if the model has an access point or LAN bridge mode. TP-Link describes this option for the RE705X, while FRITZ! offers it for the FRITZ!Repeater 1200 AX. Check that the exact model has this mode and that you can connect a cable.

What can I do if powerline is slow through one of my sockets?

Test the adapters in the sockets you plan to use and check for electrical appliances nearby. devolo recommends plugging the adapters directly into wall sockets and investigating possible sources of interference. This advice doesn’t guarantee a particular speed.

Which marking should I check on a Wi-Fi extender in the Netherlands?

Check that the specific device carries the correct CE marking. The Dutch Authority for Digital Infrastructure describes the applicable European requirements for radio equipment; the marking alone doesn’t tell you how well Wi-Fi will travel through the walls in your home.