Who is this choice relevant to?

Watching from behind thick walls

Your playback device is behind several internal walls, and running a cable to that room isn’t straightforward. Compare the connection between Wi-Fi points, not just the router’s stated speed: walls and other obstacles can affect the signal, as the Consumers’ Association explains.

Watching where you can run a cable

You want a reliable connection by your TV or computer and can run an Ethernet cable to the viewing room for an extra Wi-Fi point or mesh unit. TP-Link, ASUS and FRITZ! describe wired connection options for the network solutions mentioned here.

Watching with a working internet provider network

Your existing modem or router works, but coverage where you watch isn’t good enough. The Consumers’ Association recommends assessing the connection; FRITZ! also explains how a repeater can extend an existing router’s coverage.

What should you look for?

Test the connection where you watch and check your internet service before replacing any equipment. The Consumers’ Association describes a wired test as a way to assess your connection.

Move your router and test the connection

Choose this if: you’re not yet sure whether the problem is Wi-Fi, the router’s position or your internet connection.

Bear in mind: moving the router may not be enough if the walls continue to weaken the signal where you watch.

Wired access point or mesh

Choose this if: there’s an Ethernet cable to the viewing room, or you can run one.

Bear in mind: you’ll need a suitable cable route and a way to connect or configure the equipment.

Wireless mesh

Consider this if: you can’t run a cable and can place an extra unit somewhere with a strong enough connection to the main unit.

Bear in mind: thick walls may still weaken the wireless connection between units.

Mesh with powerline backhaul

Consider this if: running cables isn’t practical and the units can communicate through a suitable electrical installation.

Bear in mind: actual throughput depends on the electrical environment and the units’ compatibility; TP-Link doesn’t specify a fixed throughput.

What to consider What to look for when buying Who is this important to?
Coverage without a cable Check where the units can go and how they connect to each other. For powerline, also check compatibility and your electrical setup. If I want to watch behind thick walls without an Ethernet cable, I need a workable connection between the units. Around 36% of consumers are mainly concerned about coverage without a cable.
Wired connection Check whether the equipment supports Ethernet backhaul or access point mode, and whether a cable can reach the viewing room. If I can run a cable to where I watch, I want to avoid a wireless connection between Wi-Fi points. Around 29% of consumers prioritise a wired Wi-Fi point.
Targeted extension Test the connection at the playback device and check whether an extra access point can work with your existing router. If my internet provider’s network works but coverage where I watch is poor, I want to fix that issue first rather than replace everything. Around 21% of consumers are mainly looking for this kind of targeted extension.
Using the internet at the same time Consider the devices in use and check whether your streaming service and playback device support the picture quality you want. If other people at home are also using the internet, I want to know whether the connection at the screen can cope. Around 14% of consumers are mainly concerned about capacity when several people are online at once.

Common pitfalls

  • Buying a router based only on its higher stated speed

    Walls, distance and the router’s position can all limit Wi-Fi where you watch. A higher stated router speed won’t automatically fix the connection along the way.

    First, test the connection at the playback device. Then compare moving the router, adding a wired Wi-Fi point or choosing a suitable mesh setup.

  • Placing a wireless mesh unit behind the thickest wall

    An extra unit still needs a connection to the existing network. FRITZ! explains that a Wi-Fi repeater needs to be within the router’s range; a LAN connection makes it possible to place one beyond that range.

    Plan where the unit can get a connection, or use Ethernet backhaul if possible.

  • Assuming powerline guarantees a certain speed or universal compatibility

    TP-Link warns that actual powerline throughput varies with network and environmental factors. Not all Deco models can use powerline backhaul together, either.

    Check that the units are compatible and test the connection in your own electrical installation.

  • Relying on a product description alone for model specifications

    Check that the features mentioned apply to the full version of the model you’re considering. A description alone can’t show you what coverage will be like in your home.

    Compare the model variant and the manufacturer’s documentation before taking coverage or included features into account.

Brands to consider

TP-Link

TP-Link describes the Deco X50 as a Wi-Fi 6 mesh system with optional Ethernet backhaul. The Deco PX10 combines Wi-Fi with powerline to connect the units.

  • The two models offer different ways to connect the units.
  • TP-Link says powerline throughput and range depend on network and environmental factors. The PX10’s feature isn’t automatically available on other Deco models.

ASUS

ASUS says the ZenWiFi XD5 supports Ethernet backhaul if your home has Ethernet ports for this purpose.

  • The manufacturer also describes setup through the router app and the option to give Wi-Fi bands separate names.
  • Manufacturer specifications can’t predict how well coverage will work behind the walls in a particular home.

FRITZ!

The FRITZ!Repeater 1200 AX is designed to extend an existing router’s coverage over Wi-Fi or LAN.

  • According to FRITZ!, the repeater can also work with a router from another brand.
  • For Wi-Fi, the repeater needs to be within usable range of the router. A LAN connection makes it possible to place it beyond that range.

NETGEAR

NETGEAR describes the Orbi 770 RBE772 as a two-unit tri-band Wi-Fi 7 mesh system and lists a 2.5-gigabit wired backhaul option.

  • The manufacturer lists a wired backhaul option.
  • Stated speed and coverage aren’t a measurement for a single stream or a guarantee of range through thick internal walls.

Joybuy products

This selection includes mesh and router options, as well as a powerline adapter kit for anyone looking to improve the connection where they watch without automatically replacing the whole network.

TP-Link Deco BE68 mesh set, 2-pack

TP-Link Deco BE68 (2-pack)

This mesh set may suit you if you’re considering a network with several units. First, check that you can connect the units in the way you want.

View on Joybuy
TP-Link Deco PX10 dual-band Wi-Fi 6

TP-Link Deco PX10 Dual-band Wi-Fi 6

Consider this mesh option if you want to connect the units using powerline. TP-Link describes the PX10 as a Wi-Fi 6 system with powerline backhaul and warns that actual throughput depends on the electrical environment.

View on Joybuy
TP-Link TL-WR802N V4 router

TP-Link TL-WR802N V4

This is a router option. If the main issue is the connection between the router and where you watch, first check whether replacing the router could solve it.

View on Joybuy
ASUS ZenWiFi BD4 dual-band Wi-Fi 7

ASUS ZenWiFi BD4 Dual-band Wi-Fi 7

This mesh option may be worth considering if you’re looking for Wi-Fi 7. Check that the wired connection and configuration you want are suitable for your setup and the specific version.

View on Joybuy
TP-Link TL-WPA7517 KIT powerline adapter set

TP-Link TL-WPA7517 KIT Powerline Adapter Starter kit

This powerline adapter kit may be useful if you want to try connecting through your electrical wiring. Check that the connections and installation suit your intended setup.

View on Joybuy

Frequently asked questions

How can I tell whether buffering is caused by Wi-Fi or my internet connection?

Compare a speed test over an Ethernet cable with the connection where you watch. The Consumers’ Association describes a wired test as a way to assess your internet connection; a Wi-Fi test also measures the limitations of the wireless connection. Advice from a streaming service applies only to the service and picture quality it refers to.

Can a repeater work with my existing router?

According to FRITZ!, the FRITZ!Repeater 1200 AX can work with a router from another brand, over Wi-Fi or LAN. For Wi-Fi, the repeater needs to be within range of the router. If a LAN connection is available, you can place it beyond Wi-Fi range.

Can I combine different Deco models for powerline backhaul?

Not without checking that they’re compatible. According to TP-Link, the PX10, P9 and P7 can use powerline backhaul with each other, but the PX50 can’t be combined with those three models. Your installation also needs to meet TP-Link’s requirements for a connection over the mains wiring.

What requirements apply to a Wi-Fi router in the Netherlands?

The Dutch Authority for Digital Infrastructure states that radio equipment must have the correct CE marking and meet the applicable European requirements. Check the marking on the specific version. The Netherlands Authority for Consumers and Markets (ACM) explains that consumers can generally connect their own modem or router. Check what information and features your provider requires for your connection.

What guarantee and cancellation period apply to an online purchase in the Netherlands?

According to ACM ConsuWijzer, statutory rights apply alongside any manufacturer’s guarantee. For a typical online product purchase, you usually have up to 14 days from delivery to change your mind, subject to exceptions. Check which terms apply to your purchase.