Which clubs is this for?

Clubs with a cable to the archive

Need a connection behind thick walls and can run an Ethernet cable to a nearby Wi-Fi point or access point. Walls and other obstacles can interfere with the radio signal; TP-Link describes Ethernet backhaul as a way to connect Deco points by cable.

Clubs without a cable route

Can’t run Ethernet and want to find out whether powerline works between suitable sockets. TP-Link describes powerline backhaul as a connection over the electrical wiring; you’ll need to check on site whether the electrical circuit is suitable.

Clubs with visitors and archive staff

Need to think not just about coverage, but also about providing separate access for visitors and staff. If the club processes personal data, it must protect it properly in line with the Dutch Data Protection Authority’s guidance.

What should you consider?

Start with the connection between the router and the point near the archive. First, explore wired backhaul if you can run a cable; consider powerline as an alternative if you can’t run Ethernet; and test wireless mesh somewhere the intermediate point itself gets a good signal. Consider access management and the installation and ongoing management workload separately.

Point to consider What should you check? Who is this important for?
Connection behind thick walls Check whether the exact model supports Ethernet backhaul and whether you can run a cable to the points. Also test the Wi-Fi signal by the archive equipment. If I mainly need a working connection at the archive, the link between the points is a priority. Around 36% of consumers put a reliable connection behind walls first.
No Ethernet cable route Check whether the powerline points you’ve chosen are suitable for the same set-up, and test whether they connect using the existing power sockets. If I can’t run an Ethernet cable, I’m looking for another way to connect the points. Around 29% of consumers prioritise a solution that doesn’t need an Ethernet cable.
Access for guests and staff Work out who needs access to the archive. Check that the router, switch and access points work together to provide the network separation you want. If visitors and staff need different levels of access, I want to know how the archive network is protected. Around 21% of consumers prioritise separate access.
Installation and management List the cables, points, switches and any power supplies you’ll need. Also decide who will install and manage the network in future. If I’m organising the set-up for the club, I want to know in advance how much installation and management it will involve. Around 14% of consumers prioritise the overall installation and management workload.

Buying points not to overlook

  • Assuming the stated coverage area guarantees a signal in the archive

    Walls and other obstacles can affect the radio signal. A stated coverage area doesn’t tell you whether the connection will work in your club building.

    Before choosing a set-up, check both the connection between the points and the signal in the archive.

  • Choosing powerline mesh without checking the electrical circuit

    For Deco PX50 powerline backhaul, TP-Link says the points must be on the same electrical circuit. TP-Link also states that the PX50 doesn’t provide powerline backhaul with the PX10, P9 or P7.

    Check the exact model numbers and connection options, then test whether the connection works on site.

  • Assuming a guest network means archive access is protected

    A separate Wi-Fi name on its own doesn’t prove that access to other networks is properly restricted. Ubiquiti describes network isolation as part of the wider network set-up.

    Work out who needs access and check the router, switch and access point settings together.

Brands to consider

TP-Link

According to TP-Link, the Deco X50 offers optional Ethernet backhaul, while the Deco PX50 combines Wi-Fi with G.hn powerline.

  • The two models offer different ways to connect mesh points.
  • The PX50 powerline set-up requires suitable points on the same electrical circuit and isn’t powerline-compatible with the PX10, P9 or P7. These connection options don’t guarantee that the signal will work in a particular club building.

FRITZ!

The FRITZ!Repeater 3000 AX is an option to explore if your club already has a compatible FRITZ! mesh set-up.

  • FRITZ! lists two gigabit LAN ports and a LAN connection to a FRITZ!Box.
  • The shared mesh settings described require a compatible FRITZ! mesh master. Check that your existing router is suitable.

ASUS

ZenWiFi BD4 is a dual-band mesh option. ASUS lists two 2.5-gigabit ports and describes wired AiMesh set-ups.

  • The port and configuration details can help you assess a wired set-up.
  • These specifications don’t tell you whether Wi-Fi will reach through the walls of your club building. Check the exact kit and how it connects to your existing network.

Ubiquiti

UniFi U6+ is a wired, managed access point to consider if your club wants to manage its network and provide separate guest access. It isn’t a standalone wireless mesh kit.

  • Ubiquiti specifies one gigabit network port.
  • According to Ubiquiti, network isolation requires configuration across the wider network. Also check the power supply, network equipment and ongoing management you’ll need.

Joybuy products

These Joybuy products are suited to mesh set-ups for a club archive, including models with listed wired backhaul options or the ability to add mesh points. For each exact variant, check that the connection and required ports are compatible with your network.

ASUS ZenWiFi BD4 dual-band Wi-Fi 7, 1-pack

ASUS ZenWiFi BD4 Wi-Fi 7, 1-pack

Worth considering for a mesh set-up with wired backhaul options. Check whether the single mesh node included is suitable for the club’s needs.

Dual-band (2.4 GHz / 5 GHz); Wi-Fi 7 (802.11be); one mesh node.

Joybuy
TP-Link Deco X50 Wi-Fi 6, 3-pack

TP-Link Deco X50 Wi-Fi 6, 3-pack

Worth considering if you can run Ethernet to the Deco points; TP-Link describes optional Ethernet backhaul for the Deco X50.

Dual-band (2.4 GHz / 5 GHz); Wi-Fi 6 (802.11ax); three nodes.

Joybuy
Linksys Velop Pro 7 tri-band Wi-Fi 7

Linksys Velop Pro 7 Wi-Fi 7

Worth considering if you want to extend a mesh set-up. Check that additional nodes of the right variant are compatible with your network.

Tri-band (2.4 GHz / 5 GHz / 6 GHz); Wi-Fi 7 (802.11be).

Joybuy
TP-Link Deco X50-POE Wi-Fi 6, 2-pack

TP-Link Deco X50-POE Wi-Fi 6, 2-pack

Worth considering for a mesh set-up with PoE power. Check that the required power supply and network connections suit your installation.

Dual-band (2.4 GHz / 5 GHz); Wi-Fi 6 (802.11ax).

Joybuy
TP-Link Deco XE75 Pro Wi-Fi 6E, 3-pack

TP-Link Deco XE75 Pro Wi-Fi 6E, 3-pack

Worth considering if you’re looking for a mesh set-up with several points included. Check the positioning and connection between the points near the archive.

Tri-band (2.4 GHz / 5 GHz / 6 GHz); Wi-Fi 6E (802.11ax); three units.

Joybuy

Frequently asked questions

Where should you place an extra Wi-Fi point near the archive?

Don’t place a wirelessly connected point only where the signal is poor: check its connection to the previous point too. For a wired Deco set-up, TP-Link recommends setting up the points first, then connecting the satellite using the correct network port. After that, check the backhaul status.

Can a Deco PX50 work with existing powerline Deco units?

Not for shared powerline backhaul with the PX10, P9 or P7, according to TP-Link. So check the full model number of your existing points before extending the set-up.

How can you provide separate access for visitors and the club archive?

Check that the entire router, switch and access point set-up supports the network separation you need. If the club processes personal data, it must protect it properly in line with the Dutch Data Protection Authority’s guidance. A guest network alone doesn’t prove that all requirements are being met.

Should you consider anything beyond the mesh kit?

Yes. Check whether you’ll need Ethernet cabling, a compatible switch, power for access points or network management. What the club needs will depend on its existing equipment and the set-up you choose.

Do you need a permit or registration for Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi uses radio frequencies that don’t require a permit, notification or registration. The RDI also states that equipment must carry the appropriate CE mark; check the marking on the device you receive.