Who needs Wi-Fi for a home with thick walls?

Someone with Wi-Fi dead spots

You mainly want reliable coverage in rooms behind thick internal walls, and you can move your router or extra Wi-Fi points. The Consumentenbond lists walls, ceilings and other obstacles as factors that can disrupt a Wi-Fi signal.

Someone with network cabling

You have cabling between rooms, or can install it, and are looking for Wi-Fi points that can be connected to one another by cable. TP-Link and NETGEAR describe ethernet backhaul for their compatible mesh models.

Someone who wants to keep their provider’s modem

You want to expand your Wi-Fi without replacing the router function of your existing modem. Check the connection options and access point features of the system you choose; for example, TP-Link describes both router and access point modes for Deco.

What should you look for when expanding your Wi-Fi?

First, check the connection in the places where you use Wi-Fi. If your router is poorly positioned, try moving it. If you still have dead spots, see whether wired or wireless Wi-Fi points are compatible with your home and modem.

What to consider What should you check? Who is this important for?
Coverage behind walls Check each room and first try placing the router higher up or in a more central position. Then decide where you could put extra points. I want to use Wi-Fi in the rooms furthest from the router too; around 36% of consumers put coverage first.
Connection between points Check whether ethernet backhaul is possible. If the points connect wirelessly, see where they can still get a good signal. I want the Wi-Fi points to stay connected to one another too; around 29% of consumers prioritise the connection between points.
Keeping your provider’s modem Check whether the modem will remain the router, which modes the system offers and how the points need to be connected in that mode. I want to keep using my existing modem without any uncertainty about how to connect it; around 21% of consumers put modem compatibility first.
Extra equipment and power consumption Work out how many points you actually need and check the stated power consumption if several points will be left on all the time. I don’t want to leave more devices on than necessary; around 14% of consumers prioritise the number of extra points and their use.

Equipment sold in the Netherlands must carry the correct CE marking. The Rijksinspectie Digitale Infrastructuur emphasises that you should check the marking on the actual device: a product listing alone does not confirm that the version being offered meets the requirements.

Common mistakes when expanding your Wi-Fi

  • Assuming an advertised coverage area guarantees reception behind thick walls

    Walls and positioning affect the signal, so an advertised coverage area doesn’t automatically mean you’ll get good reception in every room.

    Check the places where you need Wi-Fi and see whether you can position the router and any extra points effectively.

  • Placing a wireless mesh point where the signal has almost disappeared

    The point itself needs a usable connection to the rest of the network to extend Wi-Fi coverage.

    Try a position between the router and the room with poor coverage. If you can run a cable to that spot, consider ethernet backhaul.

  • Connecting a mesh system without checking the correct mode

    The connection method differs depending on whether your existing modem remains the router or the mesh system takes over that function.

    Before installation, check the mode and connection diagram for the exact model.

  • Looking only at the main router

    You may need extra points to get coverage in several rooms, and equipment that stays on all the time uses electricity.

    First try improving the positioning, then work out how many points your home needs.

Brands to compare

TP-Link

The Deco X50 is an expandable Wi-Fi 6 mesh range. The features below apply to this model and not necessarily to all TP-Link products.

  • According to TP-Link, the Deco X50 has three gigabit ports per point and supports ethernet backhaul.
  • An advertised coverage area doesn’t show how the system will perform behind the walls in your home. If you’re connecting it to an existing modem, also check the router or access point mode.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh option to compare if you’re looking for ethernet backhaul and configurable network features.

  • ASUS describes ethernet backhaul for the XD5, as well as the option to use one network name or separate names for each frequency band.
  • You’ll need compatible devices to benefit from Wi-Fi 6. ASUS also notes that 160 MHz on 5 GHz isn’t available in every country.

FRITZ!

The FRITZ! Mesh Set 1600 2-pack is an expandable Wi-Fi 6 set with two Wi-Fi points.

  • The Consumentenbond lists features for this set including a guest network, WPA3 and one ethernet port.
  • The test result cited for the 2-pack is based on the 3-pack; it isn’t a separately measured assessment of the 2-pack.

NETGEAR

Orbi is worth comparing if you’re looking for a mesh router with satellites.

  • NETGEAR describes both wireless and wired backhaul for compatible Orbi systems.
  • Check support for the specific Orbi model. NETGEAR recommends updating the firmware before setting up ethernet backhaul.

Joybuy products for Wi-Fi at home

This selection includes mesh systems for Wi-Fi across several rooms and a standalone router for comparison. For each model, check that the connection and mode are compatible with your existing modem.

Before buying, also check that the version being offered carries the correct CE marking. The product name or listing alone doesn’t confirm this.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 (2-pack)

An option to compare if you’re looking for a mesh system with two points; check which connection and modem settings are right for your set-up.

View at Joybuy
TP-Link Deco E4 mesh system, Wi-Fi 5, 2.4 and 5 GHz, 3-pack

TP-Link Deco E4 (3-pack), Wi-Fi 5

A good fit if you want to compare mesh systems for several rooms; bear in mind that it uses Wi-Fi 5.

The product name specifies Wi-Fi at 2.4 and 5 GHz.

View at Joybuy
ASUS ZenWiFi BD4 dual-band Wi-Fi 7, 2.4 and 5 GHz

ASUS ZenWiFi BD4, dual-band Wi-Fi 7

A model to compare if you’re looking for an ASUS ZenWiFi system; check the connection between the points and how this version connects to your modem.

The product name specifies Wi-Fi at 2.4 and 5 GHz.

View at Joybuy
TP-Link AX1800 mesh Wi-Fi system, Wi-Fi 6, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System (2-pack)

An option if two mesh points suit the layout of your home; check how you can connect the points to each other and to your modem.

The product name specifies Wi-Fi 6 and a two-piece set.

View at Joybuy
ASUS RT-AX52 AX1800 dual-band Wi-Fi 6 router

ASUS RT-AX52 AX1800 Wi-Fi 6 router

A standalone router to compare if you want to improve your set-up by repositioning your router first, or are considering an expandable network.

The product name specifies dual-band Wi-Fi at 2.4 and 5 GHz and Gigabit Ethernet.

View at Joybuy

Frequently asked questions

How can you tell whether your broadband connection or your home Wi-Fi is slow?

First, test the connection using a computer plugged in with a network cable, then compare it with the Wi-Fi in the rooms with poor coverage. This can help you work out whether extra Wi-Fi points are likely to solve the problem.

Where should you put a wireless mesh point?

Try placing it between the existing router and the room with poor coverage, with as few obstacles as possible between the points. Then check with a measurement that the connection between the points is still usable.

Can a mesh system work with my existing modem?

It depends on the connection options and settings of the exact model. TP-Link describes both router and access point modes for Deco. If your existing modem will remain the router, check the model instructions for the right mode and connection method.

Do you need a licence for ordinary home Wi-Fi in the Netherlands?

According to the Rijksinspectie Digitale Infrastructuur, home Wi-Fi does not require a licence if you use the designated frequencies and comply with the conditions of use. This does not mean you can use any frequency or transmitter settings without restriction.

What should you look for in a router sold in the Netherlands?

Check that the actual device carries the correct CE marking, which is required for this equipment. A product name or online listing alone doesn’t confirm that the version being offered meets the requirements.