Who is this choice relevant to?

Residents with weak Wi-Fi upstairs

A good broadband connection doesn’t automatically mean that the Wi-Fi signal will be strong enough in bedrooms or the loft. First, check the areas where coverage is poor, then consider the router’s position or adding an access point. The Consumentenbond recommends testing your broadband connection over a wired connection, among other steps.

Households with lots of simultaneous use

If people are video calling, streaming or working at the same time, it’s worth checking whether the issue lies with your broadband connection or your Wi-Fi. A wired test helps you tell the difference; the Consumentenbond describes this approach for testing your home broadband speed.

Residents who manage their own network

If you want to manage settings, security and updates yourself, you could consider using your own router or keeping your provider’s router. Check the connection settings required by your provider in advance, and find out how updates are handled. ACM ConsuWijzer explains your freedom to choose a router, while VeiligInternetten recommends keeping updates in mind.

What should you look for when choosing?

Start by checking your broadband connection and the areas where Wi-Fi coverage falls short. Then decide whether a better position, a wired access point, mesh or a different router is the right solution.

Reposition your existing router

Choose this if: your wired connection is good, but Wi-Fi is weak mainly in certain areas.

Bear in mind: changing the router’s position won’t always solve a persistent dead zone behind walls or floors.

One standalone router

Choose this if: coverage is already sufficient in the areas you need, but you want different connections or your own network features.

Bear in mind: check that it’s compatible with your provider’s modem, and don’t assume one router will automatically cover every floor.

One wired Wi-Fi access point

Choose this if: coverage is weak mainly in one distant room or on one floor, and you can run an Ethernet cable there.

Bear in mind: the access point needs a wired connection and a suitable location with a power supply.

Mesh with multiple access points

Choose this if: coverage is weak in several areas of your home and you can position the access points appropriately.

Bear in mind: the access points need power, and wireless connections between them can still be affected by obstacles. Check whether wired backhaul is possible.

What to consider What should you check? Who is this important for?
Coverage across rooms and floors Check the areas where people go online. Find out how many access points you need, where they can go and whether wired backhaul is supported. If Wi-Fi is weak upstairs or at the back of the house while the broadband connection works, I want better coverage in those areas. Around 33% of consumers say coverage is their main concern when buying.
Simultaneous use Compare a wired speed test with a Wi-Fi test, and check which Wi-Fi versions the devices you use support. When several people are video calling, streaming or working at the same time, I want to know whether the limitation is with Wi-Fi or the broadband connection. Around 27% of consumers say simultaneous use is their main concern when buying.
Connection to your provider’s network Decide whether you’ll keep your provider’s modem, and check with your provider which settings and connections you need. If I want to keep my provider’s equipment, an additional system needs to connect to it without unnecessary installation steps. Around 20% of consumers say compatibility is their main concern when buying.
Security and maintenance Check how firmware updates are supplied and what options are available for network security and guest access. If you manage your own network, you’ll want to keep on top of updates and settings. Around 20% of consumers put security and maintenance first.

Common buying mistakes

  • Buying a faster router when the problem is your connection or its position

    A wired test helps you tell the difference between a slow broadband connection and weak Wi-Fi. Walls and the router’s position can limit wireless coverage.

    Test your connection over a cable first, and check the areas where Wi-Fi is poor too. If possible, adjust the router’s position before choosing new equipment.

  • Assuming a Wi-Fi version or advertised top speed guarantees good coverage

    The Wi-Fi version alone doesn’t tell you how well the signal will reach throughout your home. Your devices also need to support the relevant features, and advertised speeds aren’t measurements taken in your home.

    Before choosing a Wi-Fi standard, compare the positioning and number of access points, the devices you use and the connection between the access points.

  • Not checking which version of a mesh system you’re buying

    A product range may include individual access points and sets with different numbers of units. These are different purchases.

    Before ordering, check the full model name, number of access points, connections and warranty terms for the exact version.

Brands to compare

TP-Link

The Deco X50 is an example of a Wi-Fi 6 mesh system for anyone comparing extra access points and optional Ethernet backhaul.

  • According to TP-Link, the Deco X50 has router and access point modes, plus three gigabit ports per unit.
  • The set size and hardware version matter. Manufacturer information isn’t an independent measurement of coverage or performance in a terraced house.

FRITZ!

The FRITZ!Box 4060 is a standalone tri-band Wi-Fi 6 router designed to work behind an existing modem.

  • According to FRITZ!, this model has a 2.5-gigabit WAN port, three gigabit LAN ports and a DECT telephone base station.
  • It’s a single router, so assess separately whether its coverage will be sufficient on distant floors. Advertised speeds are manufacturer information.

ASUS

The ZenWiFi BD4 is a Wi-Fi 7 mesh range for anyone comparing multiple access points, wired connections and expandability.

  • ASUS lists two 2.5-gigabit ports per BD4 unit, as well as support for wired backhaul.
  • The Consumentenbond reviews the 3-pack, but a newer Wi-Fi version alone doesn’t prove it will benefit your household.

Netgear

The Orbi 770 RBE773 is a set with one router and two access points, worth comparing as a three-piece Wi-Fi 7 system.

  • The Consumentenbond product page lists a guest network and Ethernet connections for this version.
  • Advertised wireless speeds are claims, not real-world measurements taken here.

Joybuy products

These mesh systems, with two or three units, are designed to provide Wi-Fi in multiple areas of your home. Focus on comparing the number of access points and connections in the version that suits your needs.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 (2-pack)

This two-unit mesh system is designed to provide Wi-Fi coverage in multiple areas of your home.

Set of 2 units.

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System (2-pack)

A mesh system for anyone looking to provide Wi-Fi coverage in multiple areas.

Wi-Fi 6; AX1800; set of 2 units.

View at Joybuy
TP-Link Deco X50 dual-band Wi-Fi 6 mesh system, 3-pack

TP-Link Deco X50 (3-pack), Dual-Band Wi-Fi 6

This three-unit mesh system is designed to extend Wi-Fi coverage to multiple rooms or floors.

Wi-Fi 6; dual-band (2.4 GHz/5 GHz); three gigabit ports per unit and optional Ethernet backhaul, according to TP-Link.

View at Joybuy
TP-Link Deco XE75 Pro tri-band Wi-Fi 6E mesh system, 3-pack

TP-Link Deco XE75 Pro (3-pack), Tri-Band Wi-Fi 6E

This three-unit mesh system is designed to provide Wi-Fi coverage in multiple areas of your home.

Tri-band (2.4 GHz/5 GHz/6 GHz); Wi-Fi 6E.

View at Joybuy
TP-Link Deco X50-PoE dual-band Wi-Fi 6 mesh system, 3-pack

TP-Link Deco X50-PoE (3-pack), Dual-Band Wi-Fi 6

This three-unit mesh system is designed to provide Wi-Fi in different areas of your home.

Wi-Fi 6; dual-band (2.4 GHz/5 GHz); two Ethernet ports per unit. A compatible PoE supply is required to power the units via PoE.

View at Joybuy

Frequently asked questions

How can I tell whether my router or broadband connection is causing the delay?

First, test with a computer connected using an Ethernet cable. If your broadband connection is slow too, look into the connection with your provider. If Wi-Fi is weak mainly in certain areas, check the router’s position and coverage. The Consumentenbond recommends a wired speed test.

Where should I position extra Wi-Fi access points?

Place an extra access point where it can still get a good connection to the network and there are as few obstacles as possible. The Consumentenbond recommends keeping Wi-Fi access points no more than two rooms apart, if possible.

Can I use my own router in the Netherlands?

Yes. ACM ConsuWijzer explains your freedom to choose a router. Check which connection settings you need, though; replacing a modem is subject to additional connection requirements. Ask your provider for the details that apply to your connection.

Do I need to keep a router I’ve bought myself up to date?

Yes. Check the firmware when you install it, and enable automatic updates if available. If automatic updates aren’t available, check regularly for updates yourself; VeiligInternetten recommends keeping your router up to date.

What do CE marking and cybersecurity requirements mean for a Wi-Fi router?

Radio equipment placed on the EU market must meet the applicable European requirements and carry CE marking. According to the Dutch Authority for Digital Infrastructure, stricter digital security requirements have also applied since 1 August 2025 to wireless equipment covered by those requirements. Check the documentation and compliance of the specific product separately.