Who is this guide for?

People with weak Wi-Fi upstairs or at the back of the house

If you need a connection in several places, first check whether the router is poorly positioned, obstacles are blocking the signal or the internet connection itself is falling short. The Consumers’ Association points out that walls and ceilings can interfere with the signal.

People who can run a cable

A network cable may be an option if you want to connect a Wi-Fi point in a suitable location without relying solely on the wireless connection between points. Check the connections available on your chosen system first.

People who want to keep their provider’s modem

If you want to keep using your existing equipment, check its connection and management options. An additional Wi-Fi point, an access point and a replacement router are not the same thing.

What should you consider when choosing?

First, check where the connection is falling short, then consider what positioning and connections are practical. Only after that can you work out what equipment you need.

For a terraced house where you need Wi-Fi in several places, it’s not just the number of devices and the stated coverage that matter. Consider whether you can position a Wi-Fi point somewhere useful, whether the points can connect to each other wirelessly and whether your equipment will work with your existing network.

What to consider What should you check? Who should pay particular attention?
Coverage where you need it Check the spots where you use Wi-Fi and see whether a router or extra point can be positioned outside the walkway. If I mainly need a connection upstairs or at the back of the house, I want to know whether moving the router will be enough. Around 33% of consumers put coverage where they need it first.
Connection between Wi-Fi points Check whether the system supports Ethernet backhaul and which ports are needed. If placing the points wirelessly, test whether the extra point still receives a usable signal. If you’re choosing between a wireless setup and a cable, the main priority is keeping the points well connected to each other. Around 25% of consumers give this connection top priority.
Compatibility with existing equipment Check the connection details you’ll need and whether the router or access point mode you choose is suitable for your modem and network. If I want to keep my provider’s modem, any new Wi-Fi equipment needs to connect to my existing network and be easy to manage. Around 25% of consumers prioritise this connection and management.
Cost of the complete setup Include any extra points, cables, power supplies, installation and electricity use in your comparison. If you want to keep overall spending down, look at the complete setup you need rather than just one device. Around 17% of consumers put the total cost first.

Buying pitfalls

  • Assuming a stated coverage area guarantees coverage on every floor

    Walls, ceilings and equipment positioning all affect the signal. A stated coverage area alone doesn’t tell you how Wi-Fi will perform in your home.

    Check the places where you need a connection and plan your setup around where you can position the equipment, not just the coverage area quoted.

  • Putting a wireless Wi-Fi point where the existing signal is already weak

    The extra point also needs a usable connection to the network. The Consumers’ Association advises positioning Wi-Fi points so they can connect well to each other, with as few obstacles between them as possible.

    Try a suitable position between the two points, outside the walkway. If the wireless connection isn’t good enough there, see if you can connect the point by cable.

  • Mistaking a repeater for a replacement router

    The FRITZ!Repeater 1200 AX is designed to extend an existing network, not to work as a standalone replacement router. FRITZ! describes its mesh integration specifically for use with a FRITZ!Box.

    First decide whether you need a router, an extra Wi-Fi point or a complete system. Then check which features will work with your current equipment.

  • Comparing the cost of just one device

    Your chosen setup may also need extra Wi-Fi points, cables or power supplies. Equipment that stays switched on for long periods also uses electricity.

    Before you choose, make a list of everything you need for the complete setup and compare installation and running costs as well as the purchase price.

Brands to consider

TP-Link

Deco X50 is a mesh option with several Wi-Fi points. TP-Link lists optional Ethernet backhaul and three gigabit ports for this model.

  • The stated connections and wired or wireless links can help you plan your setup.
  • The manufacturer’s coverage information isn’t a measurement of performance in your home. Deco X50-PoE is also a different model from Deco X50.

ASUS

According to ASUS, the ASUS ZenWiFi XD5 supports router, access point and AiMesh node modes.

  • The choice of modes may be useful if you want to see how a mesh system will work with your existing equipment.
  • Check the connections you’ll need and any switch settings for your installation. The right configuration depends on your setup.

FRITZ!

The FRITZ!Repeater 1200 AX is an additional Wi-Fi point for an existing router.

  • FRITZ! lists a gigabit LAN connection and a LAN connection to a FRITZ!Box. The manufacturer says the device can also be used with other routers.
  • If you use it with another router, don’t assume you’ll have the same FRITZ! mesh integration.

Ubiquiti

The UniFi U6+ is an access point for a location with an Ethernet connection and a suitable power supply.

  • Ubiquiti specifies a gigabit Ethernet port and PoE power for this model.
  • It isn’t a complete router system. Remember to factor in the network connection, power supply and management.

Netgear

The Consumers’ Association describes the Orbi RBK753 as a Wi-Fi 6 mesh system with three points.

  • The Consumers’ Association lists features including a guest network and Ethernet ports for this system.
  • These features don’t tell you how the system will perform in your home. Consider where you can position the points and how you can connect them.

Joybuy products

This selection includes mesh systems for Wi-Fi in several places, as well as a router option if you’re considering replacing your router.

TP-Link Deco BE68 2-Pack

TP-Link Deco BE68 2-Pack

A good fit if you want to share Wi-Fi across several locations with a mesh system and compare wired and wireless backhaul options.

Joybuy
ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7

ASUS ZenWiFi BD4 Dual-Band (2.4 GHz / 5 GHz) Wi-Fi 7 (802.11be)

A mesh option if you’re looking for a dedicated spot for your Wi-Fi equipment.

According to the product information, one mesh node is included. You’ll need to expand the system for several mesh points.

Joybuy
TP-Link Deco M4 (3-Pack) Dual-Band Wi-Fi 5

TP-Link Deco M4 (3-Pack) Dual-Band (2.4 GHz / 5 GHz) Wi-Fi 5 (802.11ac)

A good fit if you want to share Wi-Fi across several locations with a mesh system featuring three stations.

Joybuy
ASUS RT-AX52 AX1800 dual-band router

ASUS RT-AX52 AX1800 AiMesh dual-band router

A router option if you want to use your own router and may want to expand the system with AiMesh later.

The product name specifies Wi-Fi 6, dual-band and Gigabit Ethernet.

Joybuy
TP-Link Deco X50 (3-Pack) Dual-Band Wi-Fi 6

TP-Link Deco X50 (3-Pack) Dual-Band (2.4 GHz / 5 GHz) Wi-Fi 6 (802.11ax)

A good fit if you’re looking for a mesh system with three units and want the option of a wired connection between mesh points.

Joybuy

Frequently asked questions

Should I buy a new router if Wi-Fi is slow at the back of the house?

Not straight away. First, check your internet connection using a computer connected by cable, then compare it with Wi-Fi in the places where you need a connection. Next, try moving the router to a better spot and check again.

Where should I put an extra wireless Wi-Fi point if the hallway is narrow?

Choose a safe spot outside the walkway where the point can still get a usable connection to the other point. Don’t place it somewhere the original signal is already weak, and test the connection once it’s installed.

Can I use my own router with a Dutch internet provider?

According to ACM ConsuWijzer, you’re free to choose your router, but check that it’s suitable for your connection and ask for the connection settings if needed. A provider may refuse an unsafe device. Make sure you also keep your equipment up to date.

Do I need a licence or registration for ordinary home Wi-Fi?

The Dutch Authority for Digital Infrastructure cites Wi-Fi as an example of frequency use that doesn’t require a licence, notification or registration, provided the relevant conditions are met. Wireless equipment sold in the EU must meet the applicable radio equipment requirements. Check the markings on the specific product.

Is the legal guarantee on a router in the Netherlands always exactly two years?

No. ACM ConsuWijzer explains that there is no fixed two-year period for the legal guarantee: a product should last as long as you can reasonably expect it to. If there’s a fault the seller is responsible for, contact the seller.