What should you look for when choosing?
Move your existing router
When: If testing a better position gives you sufficient Wi-Fi in the teaching room, your existing equipment may be all you need.
Consider: The new position may require a longer cable run. Check with your provider what you’re allowed to move if you have a provider-supplied modem.
Wired access point or mesh system
When: If you can run a network cable to a suitable Wi-Fi point, the cable can provide the connection between the units.
Consider: You’ll need to check the cable route, available ports and the correct router or access point mode.
Mesh system with a wireless connection
When: If running cables isn’t practical and an intermediate mesh unit can still get a strong connection to the router.
Consider: Walls and other obstacles can also interfere with the connection between the units.
A single standalone router
When: If testing shows that a better-positioned single router can reach both rooms and can be configured to work with your existing connection.
Consider: A higher advertised Wi-Fi speed doesn’t prove that the signal will remain strong enough through the kitchen.
Test the Wi-Fi where you teach, and also check where an additional unit could still get a strong connection to the router. Ziggo and the Consumers’ Association list materials and obstacles as factors that can affect Wi-Fi.
| What to consider |
What should you check? |
Who is this important for? |
| Coverage in the teaching room |
Test the connection where you teach and try possible positions for the router or an additional unit. |
If I teach in the room beyond the kitchen, I want a reliable connection there during lessons; around 36% of consumers prioritise coverage in the teaching room. |
| Several devices at once |
Check whether the units can be connected by cable and which suitable ports are available. |
If several devices used for lessons are online at the same time, I want the connection between the rooms to suit my setup; around 29% of consumers put this need first. |
| Connecting to your home network |
Decide whether your existing modem will remain the router, and check the required operating mode and connections. |
I want to choose equipment that I can connect to my provider’s modem in a suitable way; around 21% of consumers prioritise this connection. |
| Cost and management |
Work out how many units and cables you’ll need, and check which management features are paid for. |
If I want to improve the connection for lessons without unnecessary equipment or services, I consider the costs involved and how the system is managed; around 14% of consumers put this first. |
Joybuy mesh Wi-Fi products
These mesh systems are options for extending Wi-Fi across several rooms. Check which setup and cable route will suit your home. The Dutch Authority for Digital Infrastructure states that equipment must carry the CE marking; check the marking on the device you receive.
No image available
TP-Link Deco X50 (3-pack) Dual-band Wi-Fi 6
Three mesh units could be a good fit if you want to try several positions along the route to the teaching room. The product information lists Wi-Fi 6, three gigabit ports per unit and support for Ethernet backhaul.
Joybuy
No image available
TP-Link Deco X50-PoE (2-pack) Wi-Fi 6
Two mesh units could suit you if you want to set up Wi-Fi in two places in your home. The product information lists Wi-Fi 6, PoE support and two Ethernet ports per unit.
Joybuy
No image available
TP-Link Deco XE75 Pro (3-pack) Tri-band Wi-Fi 6E
Three mesh units could be a good fit if you want to try several positions. The product information lists tri-band Wi-Fi 6E on 2.4 GHz, 5 GHz and 6 GHz, QoS and parental controls.
Joybuy
No image available
TP-Link Deco XE75 (3-pack) Tri-band Wi-Fi 6E
Three mesh units could be a good fit if you want to place several units along the route to the teaching room. The product information lists tri-band Wi-Fi 6E and three gigabit ports per unit. QoS and guest access are also mentioned.
Joybuy
No image available
TP-Link Deco X50 (2-pack) Dual-band Wi-Fi 6
Two mesh units could be a good fit if you want to extend your existing Wi-Fi to two places. The product information lists Wi-Fi 6 and optional Ethernet backhaul. TP-Link describes Ethernet backhaul for Deco units as the connection between the units.
Joybuy
Frequently asked questions
Do you need to replace your provider’s modem for better Wi-Fi in the teaching room?
No, not necessarily. First, try moving your existing device or adding an access point. The ACM ConsuWijzer confirms that you can choose your own router in the Netherlands, but check with your provider which settings you’ll need if you want to replace the device connected to your service.
Where should you put an additional Wi-Fi point if the kitchen is in the way?
Don’t place it where the existing Wi-Fi already drops out without testing first. Try an open position between the router and the teaching room where the unit still gets a strong connection, or use a network cable if possible. Follow the instructions for the mode you’ve chosen when connecting it.
Is the coverage listed on the box enough to assess two rooms?
No, the advertised coverage doesn’t automatically predict the signal you’ll get in your rooms. TP-Link says actual coverage depends on environmental factors, among other things, so test the connection where you teach.
Could security features cost extra later, and what should you do if a product develops a fault?
It depends on the service. TP-Link lists paid HomeShield subscriptions alongside its basic features. If a product develops a fault too soon under normal use, the ACM ConsuWijzer says the retailer is your point of contact for your statutory guarantee. In the Netherlands, this guarantee isn’t limited to a fixed term of just two years.
Can you use your own router in the Netherlands, and what should you check for safe use?
The ACM ConsuWijzer confirms that you can choose your own router. A provider may refuse an unsafe device and highlights the importance of updates. The Dutch Authority for Digital Infrastructure states that equipment must carry the correct CE marking, so check the marking on the device you receive and follow the installation instructions.