Who is this choice relevant to?

Housemates with Wi-Fi dead zones

If thick walls leave rooms without usable Wi-Fi, first work out where you could put additional access points. The Consumers’ Association notes that walls and other obstacles can interfere with the signal.

Homes with lots of people online at once

If you share the connection for studying, video calls and other activities, consider both coverage and network capacity. The Consumers’ Association highlights speed, ease of use and features as things to consider when choosing Wi-Fi equipment.

Housemates without a route for cables

If you can’t run a network cable to the places you need, how well wireless mesh works will depend partly on where you position the access points and how well they connect to one another.

What should you consider when choosing?

First, work out whether you can run a cable and where you need Wi-Fi. Then choose between wired access points, wireless mesh or extending your existing router’s coverage.

Wired Wi-Fi access points

Choose this if: you can run a network cable to the rooms or floors and want to connect the access points by cable.

Bear in mind: cable routes, power and the number of network ports you’ll need.

Wireless mesh with multiple access points

Choose this if: running cables isn’t practical and you can place the access points where they can still maintain a usable connection with one another.

Bear in mind: walls and placement can affect the connection between access points.

Extend your existing router’s coverage

Choose this if: your router works well where it is, but certain rooms need extra coverage.

Bear in mind: check that the extra Wi-Fi access point works with your existing equipment. FRITZ! mesh features require a FRITZ!Box.

A new router

Choose this if: the current router or its location is causing the problem and you don’t need extra Wi-Fi access points.

Bear in mind: a newer Wi-Fi version or higher advertised speed doesn’t guarantee coverage through thick walls.

What to consider What to check before buying Who is this important for?
Coverage behind thick walls Check Wi-Fi in the places where housemates work and work out where access points could go. If I work in rooms behind thick walls, I want usable Wi-Fi there and to know where extra access points could go. Around 36% of consumers put coverage first.
Using the network at the same time Check your devices, their Wi-Fi versions, your internet connection and any wired devices. If several housemates study or make video calls at the same time, I want to take the shared load into account without assuming a fixed speed for each person. Around 29% of consumers put simultaneous use first.
Installation without a cable route Check for power sockets, existing Ethernet ports and possible intermediate locations for mesh access points. If I can’t run a cable to a room, I want to know whether wireless access points can reach one another from locations that are practical for me. Around 21% of consumers put the lack of a cable route first.
Management and overall setup Check who will manage the network, how updates are provided and how many access points the setup needs. If housemates manage the network together, I want to know in advance who will maintain the settings and which access points we’ll need. Around 14% of consumers put management and costs first.

Common pitfalls

  • Confusing a high speed rating with coverage through thick walls

    The advertised Wi-Fi speed doesn’t tell you how well the signal will reach a particular room. Walls and other obstacles can interfere with it.

    First, check the connection where people in your house use Wi-Fi. Then work out where you need extra access points.

    You may need to reposition an access point, add another one or run a cable.

  • Confusing product variants or pack sizes

    The Deco X50 and X50-PoE differ in their connectivity and power options. The number of units in the pack also matters.

    Before buying, compare the full model name, pack size, ports and power method.

    Your chosen setup may need extra access points, power equipment or connection hardware.

Brands to consider

TP-Link

The Deco range includes mesh systems with wireless or wired connections between access points, including the Deco X50 and the separate X50-PoE model.

  • TP-Link says the Deco X50 has three gigabit ports per unit and supports optional Ethernet backhaul.
  • Advertised speed and coverage aren’t a measure of performance behind the walls of a particular student house. Check the exact model and pack size.
  • The X50-PoE requires a suitable PoE setup for your installation.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh system for anyone looking to use multiple access points, with the option of adding Ethernet backhaul.

  • ASUS describes wired connections between XD5 access points and setup through the Router app.
  • Check the pack variant and ports. The manufacturer lists conditions for getting the benefits of Wi-Fi 6.

FRITZ!

The FRITZ!Repeater 3000 AX is worth considering for extending an existing router’s coverage, particularly in a FRITZ!Box setup.

  • FRITZ! says this model has three Wi-Fi bands and two gigabit LAN ports, and can also be used with other routers.
  • The automatic transfer of mesh settings described by the manufacturer applies when using the device with a FRITZ!Box. It isn’t a standalone modem replacement.

Joybuy products

These products are mesh systems with multiple Wi-Fi access points. Some variants mention support for Ethernet backhaul or PoE.

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 system, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 system, 2-pack

A mesh system with two units is suited to a setup with Wi-Fi access points in several locations.

Wi-Fi 6; 2-pack.

Joybuy
TP-Link Deco X50, 3-pack

TP-Link Deco X50, 3-pack

This set of three mesh units may suit you if you want to position Wi-Fi access points in several locations.

Wi-Fi 6; dual-band: 2.4 GHz and 5 GHz. TP-Link says the Deco X50 has three gigabit ports per unit and supports optional Ethernet backhaul.

Joybuy
TP-Link Deco X50-PoE, 2-pack

TP-Link Deco X50-PoE, 2-pack

This two-unit mesh set is an option if you want to spread the access points around and have a suitable PoE setup.

Wi-Fi 6; dual-band: 2.4 GHz and 5 GHz. PoE requires suitable equipment for your installation.

Joybuy
TP-Link Deco XE75 Pro, 3-pack

TP-Link Deco XE75 Pro, 3-pack

A mesh set with three units may suit a plan to use Wi-Fi access points in several locations.

Wi-Fi 6E; tri-band: 2.4 GHz, 5 GHz and 6 GHz.

Joybuy
TP-Link Deco X50-PoE, 3-pack

TP-Link Deco X50-PoE, 3-pack

This set of three mesh units may suit you if you need several Wi-Fi access points and your setup supports PoE.

Wi-Fi 6; dual-band: 2.4 GHz and 5 GHz. TP-Link lists two Ethernet ports per unit. PoE requires suitable equipment for your installation.

Joybuy

Frequently asked questions

Where should you start if one room has poor Wi-Fi?

First, check the connection where you need Wi-Fi and try moving the router to a more central or higher position, or out of a cupboard. If that room still has poor coverage, check whether an extra Wi-Fi access point could get a connection there.

Does a mesh access point always need to be connected by cable?

No, mesh access points can also connect to one another wirelessly. TP-Link describes both wireless connections and optional Ethernet backhaul for the Deco X50; ASUS lists Ethernet backhaul for the ZenWiFi XD5. The right setup depends on your cable routes and where you can place the access points.

Can you use your own router in the Netherlands?

The Netherlands allows you to use your own router, but a provider may refuse a customer-owned device if it doesn’t meet the security conditions set out by ACM ConsuWijzer. If you’re replacing your provider’s equipment, ask about the connection settings you’ll need too. Adding a Wi-Fi access point behind your existing router is different from replacing the modem.

What maintenance does your own router need?

Keep your router up to date and, before buying, check how the manufacturer provides updates for your chosen model. ACM ConsuWijzer highlights updates as important for protecting your network and personal data.

Do you need a licence to use Wi-Fi at home?

According to the Dutch Authority for Digital Infrastructure, you don’t need a licence for home Wi-Fi if you use the frequencies designated for it and follow the conditions of use.