Who is each recommendation for?

Housemates with rooms outside the Wi-Fi range

If the connection drops out beyond several doors, the position and connection of an additional Wi-Fi point are important considerations. The Dutch Authority for Digital Infrastructure and Ziggo offer practical advice on where to place routers and Wi-Fi points.

Housemates who are online at the same time

If you use laptops, phones and other devices simultaneously, consider not only coverage but also the available ports and what the router can do. Consumentenbond and TP-Link Netherlands explain what to look out for with Wi-Fi and simultaneous traffic.

Residents who manage the network

Whoever looks after the internet connection, access details and updates should check the required settings and maintenance in advance. ACM ConsuWijzer and VeiligInternetten provide information about personal network equipment and router security.

What should you consider when choosing?

Keep the existing router

Choose this option: if the rooms have adequate coverage after testing, or if the current router is simply in a poor position.

Trade-off: you won’t need to add a second system, but moving the router won’t always solve a weak signal beyond several doors.

One standalone Wi-Fi router

Choose this option: if one suitable position can reach the rooms and you need a router with the right ports.

Trade-off: one router won’t add an extra access point near more distant rooms. Also check how it works with your provider’s connection.

Wireless mesh system

Choose this option: if the rooms are spread out, there’s no cable and you can place an additional point somewhere that still has good Wi-Fi.

Trade-off: a mesh point placed where the existing signal is already weak may not get a good connection itself.

Wired Wi-Fi access point

Choose this option: if you can run an Ethernet cable to the rooms and want to place the extra point closer to them.

Trade-off: this option requires cabling; an access point may also need suitable power and management.

What to consider What to look for when buying Who should pay particular attention?
Coverage in the rooms Test the furthest rooms and check where an extra point could go, away from the walkway. See whether you can run Ethernet to that spot. If I work or study in rooms beyond several doors, I want to know whether the signal reaches them. Around 36% of consumers say coverage in the rooms is their top priority.
Simultaneous use Check how many devices will be used at the same time and which ones could be connected by cable. When housemates are online at the same time, I want to assess the connection and available ports, not just the advertised Wi-Fi speed. Around 29% of consumers prioritise simultaneous connections.
Connection and installation Check your provider’s equipment, available ports, cable route, power requirements and possible locations. If we choose a shared installation, I want to know in advance which components and connections are needed. Around 21% of consumers give top priority to suitable installation and avoiding unnecessary equipment.
Management and security Check how the device is managed, how access is controlled and who installs updates. When residents move in or out, I want access and maintenance to be clearly organised. Around 14% of consumers place management and security above other buying priorities.

Common buying mistakes

  • Putting a mesh point where there’s no Wi-Fi

    A wireless mesh point needs a usable connection to the first point. If you put it somewhere the signal doesn’t reach, it can’t fix that weak connection by itself.

    First, try a location where the existing Wi-Fi still works well. If coverage remains weak, check whether you can place a wired point closer to the rooms.

    A wired solution may require an extra cable or a different location.

  • Assuming the advertised Wi-Fi speed is available in every room

    An advertised speed doesn’t guarantee the same connection behind doors or at a distance. Your internet connection and where you place the equipment also make a difference.

    Test the places where housemates use the internet, and compare the setup and connections, not just the advertised speed.

  • Confusing an access point with a complete router

    An access point such as the UniFi U6+ doesn’t replace the router that manages your internet connection. Ubiquiti lists PoE as its power method and one gigabit Ethernet port for the U6+.

    Check which device routes your internet connection and what power, cabling and management the access point needs.

    You may need to arrange a compatible PoE power supply, cabling or management separately.

  • Connecting your own router without agreeing on settings and management

    Your provider may require specific connection settings, and someone will need to manage the access details and updates.

    Check your provider’s connection instructions and agree which housemate will keep the settings and updates up to date.

Brands to consider

TP-Link

The Deco X50 is a mesh system, while the Archer AX55 is a standalone Wi-Fi 6 router. These models are useful for comparing multiple Wi-Fi points with a single router.

  • According to the Dutch product specifications, each Deco X50 unit has three gigabit ports and the system supports Ethernet backhaul. TP-Link lists OFDMA for the Archer AX55.
  • These model specifications aren’t independent measurements of coverage in a particular student house.

ASUS

The RT-AX58U is a standalone Wi-Fi 6 router with, among other features, access point and AiMesh node modes.

  • ASUS lists four gigabit LAN ports and several operating modes.
  • The manufacturer distinguishes between V1 and V2 processor versions. Check which hardware version is on offer; the modes don’t tell you how much coverage you’ll get beyond the doors in your house.

Ubiquiti

The UniFi U6+ is an access point for wall or ceiling mounting, not a standalone replacement for an internet router.

  • According to Ubiquiti, the U6+ uses PoE and has one gigabit Ethernet port.
  • Installation may require suitable power, mounting and UniFi management. Check the version you’ve chosen and which components you’ll need.

FRITZ!

The FRITZ!Box 4060 is designed to connect to a separate modem and can be expanded with FRITZ! mesh devices.

  • FRITZ! lists a 2.5-gigabit WAN port and three gigabit LAN ports for this model.
  • According to the manufacturer, the 4060 doesn’t have an integrated modem for a fixed-line connection; mesh devices are a separate purchase.

Joybuy products

This selection features mesh systems for rooms along a hallway. For each version, check the number of units, the cable route you need and which features your setup requires.

TP-Link Deco BE68 2-Pack

TP-Link Deco BE68 2-Pack

A set of two Deco BE68 units is a mesh option for rooms that are harder to reach from a single router location.

Set of 2 units.

View at Joybuy
TP-Link Deco X50 3-Pack Dual-Band Wi-Fi 6

TP-Link Deco X50 3-Pack Dual-Band Wi-Fi 6

A set of three Deco X50 units is a mesh option for distributing Wi-Fi points across several rooms.

Set of 3 units; dual-band Wi-Fi 6 (802.11ax).

View at Joybuy
TP-Link Deco XE75 Mesh Wi-Fi 6E

TP-Link Deco XE75 Mesh Wi-Fi 6E

A mesh system with three units is an option if you want Wi-Fi points in several rooms.

Set of 3 units; mesh Wi-Fi 6E (802.11ax).

View at Joybuy
TP-Link Deco X50-PoE 3-Pack Dual-Band Wi-Fi 6

TP-Link Deco X50-PoE 3-Pack Dual-Band Wi-Fi 6

This mesh system is designed for setups where PoE power suits the placement of the units.

Set of 3 units; dual-band Wi-Fi 6 (802.11ax); PoE support.

View at Joybuy
TP-Link Deco X50 2-Pack Dual-Band Wi-Fi 6

TP-Link Deco X50 2-Pack Dual-Band Wi-Fi 6

A set of two Deco X50 units is a mesh option for rooms spread out across the house. A wired connection between units is also worth considering when planning your setup.

Set of 2 units; dual-band Wi-Fi 6 (802.11ax).

View at Joybuy

Frequently asked questions

Do we need to replace the provider router?

No, not always. First, check the coverage and router position; an additional Wi-Fi point may be an alternative. If you want to connect your own equipment directly to your provider’s connection, ask your provider which connection settings you’ll need.

Where should we put a wireless mesh point if there’s no Wi-Fi at the end of the hallway?

Don’t simply put the point where the existing signal has already disappeared: a wireless mesh point needs to be able to make a good connection to the first point. If you can run a cable there, you could place a wired point closer to the rooms with poor coverage. Keep equipment and cables clear of the narrow walkway.

Who is responsible for keeping our own router secure?

Agree on who will look after the management settings and install updates. ACM ConsuWijzer highlights the need to update personal network equipment; VeiligInternetten recommends installing the latest updates and changing the default password.

Do you need a licence to use Wi-Fi at home?

The Dutch Authority for Digital Infrastructure describes Wi-Fi as a licence-exempt application. Also check that the version on offer has the required CE marking and use the correct country settings.

What should we check before buying for installation and maintenance?

Check how many units are in the chosen set, what cables or power the installation requires and who will manage the network. Requirements vary by setup and version; also agree who will keep track of access details and updates.